Generating Print Page

DIY PC Upgrades, adding more RAM at PB Tech!

Posted in Articles on 30/10/2018 (updated on 30/10/2018)

upgrading RAM and SSD in your Desktop PC at PB Tech

Today we'll be looking closely at some simple upgrades you can do for yourself to increase the performance of a PC. We do some things below which are not recommended, like mix-matching ram kits, just to show what happens when you do. 

One of the easiest computer upgrades you can do for yourself is to increase your RAM. We've previously written about the benefits of doing this for PC that are used for editing photos and videos but the benefits can be felt in even web browsers like Chrome, which has quite the rep for eating up lots of memory with multiple tabs open so if you start to notice your computer is slowing down when you have a lot running, it's the perfect time consider this upgrade :) 

There are two ways to approach this, you could add more if you have RAM slots spare, or, replace the RAM with an entirely new kit. Looking at your motherboard inside your PC will let you know which option you'll be going with, as shown below with a range of different motherboards - whether it's two of four - the ram slots are usually on the right-hand side.

Find your RAM at PB Tech

What makes RAM upgrades so easy is the plug and play aspect of the install, you won't need to hunt special cables or install the right program to do it, if it fits, it generally works :) The size of the slots has changed a bit over the years but luckily the sizes are easily identified by the ram currently in your system - namely DDR4, DDR3 (a bit older) and DDR2 (from the 90's!)

OK, so let's actually do an upgrade so you see exactly what's involved - we'll be using our own GGPC Hero for the examples below as it's the best value entry level Gaming PC available, and with so many people already owning one - it's a prime candidate for future upgrades.

I understand that many people don't have a workshop, so I'll be doing this on a plain kitchen bench with some white paper on top. You can generally upgrade quite safely by first touching a grounded object (I touched the jug in the kitchen) but if you're worried about static you can buy special anti-static bracelets here, these clip onto the PC case your working on and are quite handy if you have to leave and come back thanks to the little dome clip on the wrist.

Let's begin by first opening up the PC. for me this is via the side window panels - lay the PC on its side first with the window facing upwards. You'll see the thumb in the four corners, give these a twist to the left (the rule is righty tighty - lefty loosey) and the panel will lift off.

Now we're able to access the inside we'll take a closer look at the RAM slots as these have a latch you'll click so you can pull out the ram to have a closer look at it. 

This latch can be on just one side, or both, on this motherboard we find that the top can be pressed to allow for the removal of the RAM inside.

Flick the latch and then give the RAM a pull upwards from the top and it'll slide out rather easily, if it doesn't check the latch is fully depressed, push down will often cause the ram to pop up a little on the latch side signalling it's ready to be removed.

Now that the RAM is out we can clearly see the little numbers on the side, typing this into the PB Tech website I quickly find the exact ct8g4dfs8266 kit - making this a great option for buying for the upgrade.

However! That perfect match isn't 100% needed for the upgrade, and sometimes you'll be unable to find the exact kit used in your PC. To demonstrate this we'll grab a first generation GGPC Hero (from a few years back) which used DDR4 sized RAM but instead of this being 2666MHz like the current version, it was 2133MHz (pretty fast at the time!) and we used a 2x4GB kit rather than the current 1x8GB. We did to free up the slot for future upgrades just like this! 

With both fitted the system still works just fine, however, the faster, newer ram will slow itself down to match to the speed of the other kit, as shown below in the image to the right both my RAM sticks are now running at 2133Mhz :( But hey, I've got 12GB now! Going a little less different, but still different, we'll now pair our current 2666MHz RAM stick with a different 8GB RAM stick. 

For this we've used a better RAM stick that, while it still runs at 2666MHz, has a different CAS latency & timings - you can read more about RAM CL here if you want to know more, and we've written a more in-depth article on timings here also. That aside for now, we can see we now have 16GB of RAM running at 2666MHz. Also if you're wanting to take a screenshot in BIOS like we have you first pop in a USB flash drive, then when you push F12 this will save a screenshot to the USB stick. For checking your RAM while on the windows 10 desktop we first press start, then typed "DXDIAG" into the search bar to bring up the little window shown on the right. This also shows my exact CPU being used - which is important for the next upgrade in which we'll do a full RAM kit replacement.

Ah, that was good fun! Now let's do a full replacement and pop in a new RGB Ram kit, replacing our existing kit. This is the considered to be the best upgrade path with both sticks of RAM perfectly matched.

As this is a completely new kit, and it won't be affected by the previous RAM fitted in the PC. Now is a good time to quickly talk about choosing the perfect speed RAM for your PC upgrade. This is done by looking a little closer at the exact motherboard model you are using and checking the RAM speed it supports. This can be done the same in the same way as we checked the first RAM above, by typing model number into the PB Tech search bar - in this case, mine is named a320m-hdv and when I look at the specification information for that model, I can see that with a Ryzen CPU fitted I can support up to 32GB of 3200MHz DDR4! 

Popping in the kit is much the same, but I've gone with a little extra RGB for the fun of it, you can check out our favourite kits in the Top 10 RGB RAM kits at PB Tech article here.

OK, so that RAM pretty much covered but before we move onto SSD we'll quickly talk about multiple slots. If you're not filling every slot on the motherboard the placement of your RAM is actually important, you can find this information in the manual for your motherboard but generally, it's 1 stick in slot 4, a second in slot 2, a third in slot 3 and a fourth in slot 1.

The article continues on to DIY PC Upgrades, adding an SSD at PB Tech - so check it out if you're wanting to continue the upgrades!

Shop Desktop RAM at PB Tech

Home Tips & News DIY PC Upgrades, adding more RAM at PB Tech!
Customer Testimonials - See More