This was the cheapest new PC case I could find which fits ATX motherboards and has front USB 3.0, and it really earns its price tag. It's tiny, it's made of the thinnest metal I have ever seen, it has absolutely no frills (but surprisingly good cable management for the price) and the drive cage at the bottom is riveted in, not screwed, which makes it really hard to fit a full width ATX motherboard. It looks like it has 2 5.25 bays but really there's only one as the first one is blocked by the top IO. Looks great though, once you've crammed a build in and put the side on there's no complaining about the looks.

5 Stars for the price, -1 for...view more This was the cheapest new PC case I could find which fits ATX motherboards and has front USB 3.0, and it really earns its price tag. It's tiny, it's made of the thinnest metal I have ever seen, it has absolutely no frills (but surprisingly good cable management for the price) and the drive cage at the bottom is riveted in, not screwed, which makes it really hard to fit a full width ATX motherboard. It looks like it has 2 5.25 bays but really there's only one as the first one is blocked by the top IO. Looks great though, once you've crammed a build in and put the side on there's no complaining about the looks.

5 Stars for the price, -1 for the riveted drive cage.

This case is alright, and does the job. The metal is very thin, and will flex during your build.
Once the build is done, you'll be OK.

I got the Aerocool CS-1103 because is was looking for a cheap, straightforward case without lots of embellishments or fancy styling.

The front connectors include USB, audio/mic, power and reset as described. Note that while is appears there are two 5.25 inch drive bays, only the lower one is available - if this is used, it might appear that your CD drive is in a 'funny' position.

This case isn't riddled with ventilation holes which suited my build. I didn't use water cooling, and there seems like th...view more This case is alright, and does the job. The metal is very thin, and will flex during your build.
Once the build is done, you'll be OK.

I got the Aerocool CS-1103 because is was looking for a cheap, straightforward case without lots of embellishments or fancy styling.

The front connectors include USB, audio/mic, power and reset as described. Note that while is appears there are two 5.25 inch drive bays, only the lower one is available - if this is used, it might appear that your CD drive is in a 'funny' position.

This case isn't riddled with ventilation holes which suited my build. I didn't use water cooling, and there seems like there is ample room in the front chassis for it, but no ventilation out the front panel.

The included hardware was sufficient to mount the mATX motherboard and PSU. The metal felt very flimsy when putting this in, but once done I don't think it's a problem.

Great for budget builds or family PCs that don't need to look flash.

Really nice ATX Case, easy to keep cables neat as well as good space for SSD / HDD storage. Really nice ATX Case, easy to keep cables neat as well as good space for SSD / HDD storage.

I found this case perfectly fine for such a cheap price, has good amount of mounting points for HDD and SDD and not too hard to install your mother board in, only gripe is that the PSU mount is at the top of the case and cable management is a little tricky but defiantly could be a lot worse. I found this case perfectly fine for such a cheap price, has good amount of mounting points for HDD and SDD and not too hard to install your mother board in, only gripe is that the PSU mount is at the top of the case and cable management is a little tricky but defiantly could be a lot worse.

Was looking for a case to complete my pc build on a budget. So happy with price and the case worked a charm. A little tight on cabling but for the price was worth it. Would recommend this case if cost is a concern to you. Thanks Was looking for a case to complete my pc build on a budget. So happy with price and the case worked a charm. A little tight on cabling but for the price was worth it. Would recommend this case if cost is a concern to you. Thanks

This case is bas for a gaming pc for 2 big reasons; the front panel has no holes for ventelation meaning literary no air gets in unless toy dill holes in it and number 2 the back of the case has verry little space for cable management, when i tried to tie all the cables down the back panel would never fit and there are only 6 tiedown points which are all crammed togeather at the front side of the case. You should probably spend a few more dollars on a better case allround. This case is bas for a gaming pc for 2 big reasons; the front panel has no holes for ventelation meaning literary no air gets in unless toy dill holes in it and number 2 the back of the case has verry little space for cable management, when i tried to tie all the cables down the back panel would never fit and there are only 6 tiedown points which are all crammed togeather at the front side of the case. You should probably spend a few more dollars on a better case allround.

Bought this case so I could upgrade my video card to a high end 8GB Nvidia which are around 290mm+ in length, as my current case could only fit at max a 270mm size card.

I also needed to rehouse a I5 3rd Gen system with 1 x SSD & 2 x 3.5" HDDs, for which I was worried that 3 HDDs wouldn't fit as the traditional drive bays

had been removed to accommodate a longer length card, but the layout of the case has let me kit out all components in logical places that leave them not too cramped

or give the chance for overheating. It's good starter case, at a good starter price for upgrading and with the faux brushed aluminum style front panel...view more Bought this case so I could upgrade my video card to a high end 8GB Nvidia which are around 290mm+ in length, as my current case could only fit at max a 270mm size card.

I also needed to rehouse a I5 3rd Gen system with 1 x SSD & 2 x 3.5" HDDs, for which I was worried that 3 HDDs wouldn't fit as the traditional drive bays

had been removed to accommodate a longer length card, but the layout of the case has let me kit out all components in logical places that leave them not too cramped

or give the chance for overheating. It's good starter case, at a good starter price for upgrading and with the faux brushed aluminum style front panel

it compliments any home entertainment setup if being used for an HTPC / Gaming config.

Plenty of room and good cable management and cooling. It also looks nice. Plenty of room and good cable management and cooling. It also looks nice.

For a cheap case it has good cable management. Unfortunately the tip 5.25 bay isn't usable For a cheap case it has good cable management. Unfortunately the tip 5.25 bay isn't usable

Small ATX case, great for its price, being the cheapest here. Had a bit of trouble putting the power supply and the motherboard, but overall function well. Small ATX case, great for its price, being the cheapest here. Had a bit of trouble putting the power supply and the motherboard, but overall function well.