Corsair 4000D Airflow Black ATX MidTower Gaming Case Tempered Glass, CPU Cooler Supports Upto 170mm, GPU Supports Upto 360mm, 7+2(Vertical) PCI Slot, 360mm Radiator Supported, Front: 1X USB, 1X Type C, HD Audio, NO PSU

Decent case for atx build at decent price, easy to setup and build in. Except my Corsair h115i 280 Aio does not fit up top due to not enough clearance from my G.skill trident Z rgb ram kit however If you are planingto use 240 AIO it will fit up to easy. Decent case for atx build at decent price, easy to setup and build in. Except my Corsair h115i 280 Aio does not fit up top due to not enough clearance from my G.skill trident Z rgb ram kit however If you are planingto use 240 AIO it will fit up to easy.

By: WayneH97 31/10/20

Verified Owner

Design is clean and nice, so my RGB inside looks even better. It comes with tons of extra screws which saved me from a bad fan case. Also comes with two nice fans. Nothing to complain, definitely recommended.

Just be aware that the USB-C that comes in the top part needs to have fit in a specific USB-C connection on your motherboard (I didn't notice that before buying mine). Just mentioning because of a single cable that is not connected anywhere in my rig... :( Design is clean and nice, so my RGB inside looks even better. It comes with tons of extra screws which saved me from a bad fan case. Also comes with two nice fans. Nothing to complain, definitely recommended.

Just be aware that the USB-C that comes in the top part needs to have fit in a specific USB-C connection on your motherboard (I didn't notice that before buying mine). Just mentioning because of a single cable that is not connected anywhere in my rig... :(

Excellent case.

Pros:
Easy to work with and also not to large.
Fits Noctua NH-D15 with both fans.
Great airflow

Cons:
Only one USB type A port on top Excellent case.

Pros:
Easy to work with and also not to large.
Fits Noctua NH-D15 with both fans.
Great airflow

Cons:
Only one USB type A port on top

Good case with nice airflow, good cable management etc. Compatible with my Corsair H55 cooler. Comes with 2 fans. I added in 2 extra corsair 120mm fans and i can still barely hear anything with 4 of them going.
Only giving 4 stars as PBTechs description is "2.5" / 3.5" Bays:4" when there are actually only 2 baysfor 3.5" drives. With a bit of ingenuity i managed to get my 3rd drive in elsewhere in the case, but would have been nice to know this before i purchased it. Good case with nice airflow, good cable management etc. Compatible with my Corsair H55 cooler. Comes with 2 fans. I added in 2 extra corsair 120mm fans and i can still barely hear anything with 4 of them going.
Only giving 4 stars as PBTechs description is "2.5" / 3.5" Bays:4" when there are actually only 2 baysfor 3.5" drives. With a bit of ingenuity i managed to get my 3rd drive in elsewhere in the case, but would have been nice to know this before i purchased it.

It has great cable routing
It doesn't fit my larger PSU, but since I didn't need the HDD caddy, I removed that and I had a lot more room.
It came with quiet fans, good case connections.
The side panel is crystal clear.
Easy to clean filters front top and bottom (also a con)
*Full sized or even oversized GPU will fit
*Side panels are solid, they have a neat hinged system

Cons:
*Being a cheaper case, the screws don't perfectly line up.
*The case doesn't come with extra screws for PSU or Mobo (not needed but worth knowing)
*The filters are great, easy to remove top and bottom. Front removal requires the front facia to be removed to a...view more It has great cable routing
It doesn't fit my larger PSU, but since I didn't need the HDD caddy, I removed that and I had a lot more room.
It came with quiet fans, good case connections.
The side panel is crystal clear.
Easy to clean filters front top and bottom (also a con)
*Full sized or even oversized GPU will fit
*Side panels are solid, they have a neat hinged system

Cons:
*Being a cheaper case, the screws don't perfectly line up.
*The case doesn't come with extra screws for PSU or Mobo (not needed but worth knowing)
*The filters are great, easy to remove top and bottom. Front removal requires the front facia to be removed to access it.
*Heavier than expected
*Side panels must be removed Entirely, they are not door type windows

I know there are a fair amount of cons there, but for the price, and in most situations, the cons don't matter at all.
I have had my friends ask me to upgrade their PC cases (3-4 times more expensive) to this case. Enjoy a great deal!

Having a case with good airflow was important, considering the setup I have, and this case did just wonderful!

Pros:
The look is sleek, and since it's a pretty basic case, it's relatively easy to install parts.

Cons:
The only part I would say I had trouble with, is the HDD draw.
The screws were extremely tight and left a bruise on my fingers. And since the HDD draw is close to the power supply draw, you'd need to move it to properly install the power supply. Also, when you move the HDD draw, there is no room for a 360mm radiator, so keep that in mind for compatibility reasons.

Overall, when I got past the HDD draw, the case did aw...view more Having a case with good airflow was important, considering the setup I have, and this case did just wonderful!

Pros:
The look is sleek, and since it's a pretty basic case, it's relatively easy to install parts.

Cons:
The only part I would say I had trouble with, is the HDD draw.
The screws were extremely tight and left a bruise on my fingers. And since the HDD draw is close to the power supply draw, you'd need to move it to properly install the power supply. Also, when you move the HDD draw, there is no room for a 360mm radiator, so keep that in mind for compatibility reasons.

Overall, when I got past the HDD draw, the case did awesome, and I recommend it.

Bought this case on sale for my EATX build.

Pros:
Great thermals/airflow
Great build quality, cable management is simple enough.
Lots of spare cable management tools and screws are provided
Perforated panels throughout the case including PSU shroud
Good compatibility

Cons:
The design is pretty outdated for 2023-2024. No case fan ports at the bottom or side panels like in modern cases. Modern cases in this price range have space for 8-12 case fans.
Front I/O only includes 1x Usb 3.0 and 1x USB type c header Bought this case on sale for my EATX build.

Pros:
Great thermals/airflow
Great build quality, cable management is simple enough.
Lots of spare cable management tools and screws are provided
Perforated panels throughout the case including PSU shroud
Good compatibility

Cons:
The design is pretty outdated for 2023-2024. No case fan ports at the bottom or side panels like in modern cases. Modern cases in this price range have space for 8-12 case fans.
Front I/O only includes 1x Usb 3.0 and 1x USB type c header

I really like this case. Looks good. And the ability to hide all the cables around the back of the motherboard is great. I really like this case. Looks good. And the ability to hide all the cables around the back of the motherboard is great.

Looks Good, Supports USB C. Bit flimsy on front fan mount. Looks Good, Supports USB C. Bit flimsy on front fan mount.

a very nice case recommended by staff, couldnt be happier cheers a very nice case recommended by staff, couldnt be happier cheers

By: KyleC59 18/10/20

Lots of space and good cable management. I added water cooling and additional fans but it would have probably been fine with out that. Lots of air flow. Lots of space and good cable management. I added water cooling and additional fans but it would have probably been fine with out that. Lots of air flow.

Sturdy build, clean look and easy to access. Is nice to have filters that are easy to get to. Great product Sturdy build, clean look and easy to access. Is nice to have filters that are easy to get to. Great product