GIVE FEEDBACK

Generating Print Page
Home PC Parts Cases / Chassis Mid Tower Cases Lian Li O11D EVO Reversible White...

Lian Li O11D EVO Reversible White ATX MidTower Gaming Case Tempered Glass,CPU Cooler Supports Upto 167mm, Graphics Card Supported Upto 422mm, 360mm Rad Supported, 8XPCI Slots, Front: 2XUSB, 1XType C, HD Audio,

Normally $239.00 Normally $274.85
Save: $30$35 (12%)
$208 54  +GST $239 82  inc GST
$208.54  +GST
$239.82  inc GST

Lian Li O11D EVO Reversible White ATX MidTower Gaming Case Tempered Glass,CPU Cooler Supports Upto 167mm, Graphics Card Supported Upto 422mm, 360mm Rad Supported, 8XPCI Slots, Front: 2XUSB, 1XType C, HD Audio,

Part #: CHALAN2071
3
ON SPECIAL
Normally $239.00 Normally $274.85
Save: $30$35 (12%)
$208 54 $239 82
 +GST  inc GST
Ends in --, while stocks last!
Ends in --, while stocks last!


Click & Collect: Available from 5 stores.
Select your store to check availability
Delivery: Order now and it ships tomorrow When will I receive it?
$208.54  +GST
$239.82  inc GST

Six easy payments of $41.17 per week*

Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.

Click the button below or select Laybuy as your payment method during the checkout process.

If you do not have a Laybuy account you will be able to create one at checkout.

*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Laybuy

Five easy payments of $49.69 per fortnight*

humm lets you spread the cost of your purchase over 5 or 10 interest free fortnightly payments.

Click the button below or select humm as your payment method during the checkout process.

If you do not have a humm account you will be able to create one at checkout.

*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about humm

Finance from $2.79 per week*

Get what you want at a price you can afford. Choose a finance term below to see the weekly repayment amount and apply online during checkout or in-store.

Choose a Finance Term

*Weekly payments are indicative only and based on a retail price of over a loan term of months at an interest rate of % p.a. and include a monthly service fee and a establishment fee (excludes optional Payment Protection Insurance).The total amount payable over the term of the loan is . Details of finance (including weekly payments, the total amount repayable over the term of the loan, interest rate and any applicable fees) can be confirmed with a detailed quote. Full disclosure of all of the terms of your finance will also be provided to you in the Finance Now disclosure statement for your consideration prior to confirmation of your purchase. All finance is subject to Finance Now terms and conditions and approval criteria.

Learn more about Finance Now

No payments or interest for 12 months available*

Q Card / Mastercard is your perfect shopping partner, combining the benefits of a credit card with the added ability to access a range of interest-free deals and payment holidays.

Learn more about Q Mastercard, apply online for one now, or email [email protected] to chat with our team.

*An Establishment fee of $55 applies to your first LTF transaction, a $35 Advance Fee applies to all subsequent LTF transactions. Standard Interest Rate, currently 25.99% p.a. applies to any outstanding balance at end of the interest free period. Lending criteria, $50 annual account fee, fees, terms and conditions apply.
Learn more about Q Card

  • Brand: Lian Li
  • MPN: O11D EVO White
  • Part #: CHALAN2071
  • UPC: 840353042049
  • Form Factor: EATX
  • Maximum Card Length: 422mm
  • Side Window: Yes
  • Colour: White
  • Dedicated 2.5" Bay: 3
  • 2.5" / 3.5" Bays: 6
  • 5.25" Bays: N/A
  • Radiator Support: 360mm
  • View more

What PB Tech customers are saying about this product...

See More Reviews

"Absolutely flawless case - customizable offering so much options for looks and builds sense for whatever your application. Totally blown away at the quality and design Lian li did ...view more"

B
By: Bro_nz11 21/04/22
Verified Owner

"I was looking to do an all white build with the new 12th Gen intel platform and this case whilst on the higher priced side, allows for the best cable management along with being ab ...view more"

C
By: ChrisM552 16/03/22

"The All white 011D Evo is brilliant. My cable management is neat and all tucked away behind the board. RGB makes a mess but easily managed. Plenty of space for Fans. I got 10 in to ...view more"

B
By: Babarakus 13/03/22
Verified Owner

COMBO DEALS: Buy Together and SAVE!

Save even more by creating your own combo deal with any of the items below and the Lian Li O11D EVO Reversible White ATX MidTower Gaming Case Tempered...
Total:
$701 01
 +GST
$806 16
 inc GST
Buy together and save $16.30 $18.74

This item: Lian Li O11D EVO Reversible White ATX MidTower Gaming Case Tempered Glass,CPU Cooler Supports Upto...

$239.82 inc GST
Microsoft Windows 11 Home 64bit OEM Eng Intl 1PK DSP OEI DVD

Microsoft Windows 11 Home 64bit OEM Eng Intl 1PK DSP OEI DVD

View Product
$155.00 $178.25   $149.00 +GST $171.35 inc GST (Buy together and save $6.00) $6.90)
Lian Li UNI FAN SL120 Digital Addressable RGB 120 Fan with Controller, Triple Pack, White

Lian Li UNI FAN SL120 Digital Addressable RGB 120 Fan with...

View Product
$119.00 $136.85   $113.00 +GST $129.95 inc GST (Buy together and save $6.00) $6.90)
Samsung 980 1TB NVMe PCIe 3.0 M.2 SSD Read up to 3500MB/s , Write up to 3000MB/s ,500K/480K IOPS  5 Years Warranty

Samsung 980 1TB NVMe PCIe 3.0 M.2 SSD Read up to 3500MB/s , Write...

View Product
$152.17 $175.00   $147.87 +GST $170.05 inc GST (Buy together and save $4.30) $4.94)
Seagate BarraCuda 2TB 3.5 inch SATA3 6Gb/s 256MB Internal HDD ( 2 years warranty )

Seagate BarraCuda 2TB 3.5 inch SATA3 6Gb/s 256MB Internal HDD ( 2...

View Product
  $82.60 +GST $94.99 inc GST

Features



 

O11 Dynamic EVO

- Mid-tower chassis with two modes: Normal Mode/ Reverse Mode
- Feature multi-directional power button and movable IO module
- Front and side tempered glass panels for components and RGB display
- Supports up to 3x 360 radiators and a maximum of 10 fans
- Offers 9 storage drives mounting space
- Dual-chamber layout with hooks friendly cable management compartment

O11 DYNAMIC EVO - EVOLUTION CONTINUES

Keep cool with the O11 Dynamic series all-new design and express your preferred configuration.

 

Build with the finest materials

With only a few steps, the O11D EVO can be flipped in reverse mode to experience a seamless front and side tempered glass showroom view on the right side of the chassis.

The Pure White
Fulfill your dream's all-white build with a completely white chassis, down to the smallest detail.
- White Coated Mesh Panel
- Clear Tempered Glass
- Aluminum with white powder coating
- Snow White Interior
- Silver screws
- Light Grey Rubber Grommets
- White Dust Filter

 

Versatile orientation

With only a few steps, the O11D EVO can be flipped in reverse mode to experience a seamless front and side tempered glass showroom view on the right side of the chassis.



 

Exquisite yet functional

Following the style of the O11 Dynamic series, the aluminum panels feature an updated fine mesh which provides an optimal ratio of airflow and dust filtering.

 

Innovative and flexible configuration

Featuring a modular design, the O11D EVO offers many configuration potentials when making use of optional kits, both for air cooling and water cooling.

Air cooling - unrestricted airflow
The more direct the airflow, the better the cooling performance. Thanks to the upright GPU kit and the front mesh kit (sold separately), which makes the addition of 3 extra fans at the front possible, the O11D EVO can provide powerful and direct airflow to the GPU and the CPU.

 

AIO cooling - upgraded vertical GPU
The upgraded vertical GPU kit (sold separately) provides more room for bottom-mounted fans and radiators to increase the cooling capability and efficiency of the O11D EVO. Users can either mount the GPU vertically at the lower position which provides 50mm of clearance at the bottom of the chassis, or the upper position for 90.5mm of clearance.

 

Custom water cooling - supreme thermal control
With the upright GPU kit (sold separately), users can move their water-cooled GPU next to the motherboard. This opens up the main chamber of the chassis, allowing simpler and more efficient tube runs to reach the components, and creating a restriction-free chimney-style airflow that allows the top and bottom radiators to perform more effectively.

 

Spacious cooling support

The O11D EVO features sufficient space to accommodate 3x 360mm radiators, and up to 10 fans.

Normal mode

 

Reverse mode

 

Massive storage capacity

Multiple easily accessible storage mounting points are provided to support up to 9x SSDs or 6x HDDs + 3x SSDs.

1. Side drive tray
2.5" SSD x 4 or 3.5" HDD x 2

2. Cable management bar
2.5" SSD x 2

3. Drive cage
2.5" SSD x 3 or 3.5" HDD x 2 + 2.5" SSD x 1

4. Bottom fan bracket
2.5" SSD x 4 or 3.5" HDD x 2

 

Mounting points for a 60mm fan are provided on the hard drive cage, located in the second chamber, to improve the temperature of hard drives. The same location can be used to mount a fan hub.

 

Clean look

The O11D EVO keeps the front panel as clean as possible with a multi-directional power button that can be pressed from both the front and the side of the chassis.

 

Personalised ARGB lighting strip

The front panel LED strip features 7 built-in lighting effects which can be controlled via the M button. An 8th mode is available to enable motherboard software synchronization or L-Connect control.
To turn off the LED strip, press the M button for 3 seconds in the 8th mode.

 

Friendly building process, easily removable panels

The new mechanism to mount the side panels simplifies the process to reach the interior of the case by eliminating the need to first open the top panel.

 

Note: It is recommended to fix the two glass panel top screws during transportation.

 

Struggle-free fan brackets

While each fan bracket features a quick-release design, they can be fixed to the chassis via a straightforward process.
The side bracket can be oriented in two ways to provide more clearance for fan/radiator combinations next to the motherboard.

 

Effortless cable management

The O11D EVO optimizes the user's ability to cable manage their system with a dual-chamber design and a removable bracket.

 

Relocatable I/O port

At the bottom of the chassis, the I/O module can be relocated to 3 different locations without the use of any tools.

 

Location 1
The default mode can be reached from the front.

 

Location 2
Without any tools needed, the I/O module can be moved to the left side of the chassis.

 

Location 3
Flip the chassis and change the position of the I/O port to the right side for a PC in reverse mode.

 

Location 4
Optional accessory - Top I/O (sold separately) Optimised for PC's located on the floor, the top I/O additional accessory moves the chassis I/O at the top.
Note: To fully utilise 2 x USB 3.2 Type-C ports, the motherboard needs to have 2 built-in headers.

 

Potential for dual PSU

The drive cage can be removed to make place for a second PSU, or be switched to a lower position.

 

Anti-sag bracket for perfectly horizontal GPU

The GPU anti-sag bracket is for displaying hardware through the seamless front and side tempered glass panels.

 

In collaboration with Der8auer

In continuation of the O11D family, LIAN LI has collaborated with Der8auer and the community to finalize the O11D EVO design. Thanks to his contribution, a LIAN LI badge with De8auer's name is provided. Users can place it on the cable management bar in their desired orientation.

 

Note: Feature images are for illustrative purposes only, please refer to title, description, specifications and product images for correct model upon purchasing.

Specifications

Product Name

O11D EVO

Model

O11DEW

Colour

White

Dimension (D)

465mm x (W)285mm x (H)459mm

Material

4mm Aluminum
4mm Tempered Glass
1mm Steel Structure

Motherboard Support

E-ATX (width: under 280mm)/ATX /M-ATX/ITX

PSU Support

220mm

Fan Support

Top: 120mm x 3 or 140mm x 2
Side: 120mm x 3 or 140mm x 2
Bottom: 120mm x 3 or 140mm x 2
Rear: 120mm x 1
On Drive Cage: 60mm x 1

Radiator Support

Top: 360mm x 1 or 280mm x 1
*Total max thickness: 83.5mm

Side: 360mm x 1 or 280mm x 1
*Inner scenario total max thickness:
83mm(120mm fan on top and bottom)
63mm(140mm fan on top and bottom)
*Outer scenario total max. thickness:
120mm(120mm fan on top and bottom)
100mm(140mm fan on top and bottom)

Bottom: 360mm x 1
*Total max thickness: 87.5mm

Drive Support

Bottom:2.5" SSD x 4 or 3.5" HDD x 2
Side:2.5" SSD x 4 or 3.5" HDD x 2
Drive Cage:2.5" SSD x 3 or 3.5" HDD x 2 + 2.5" SSD x 1
Cable Management Bar:2.5" SSD x 2
*Only 9 sets of 2.5" SSD mounting pads are provided

GPU Length Clearance

422mm

CPU Height Clearance

167mm

Expansion Slots

8

I/O Ports

2 x USB 3.0
1 x USB 3.1 Type-C
1 x HD Audio/ Mic
LED Colour and Mode button
Reset Button
Power Button

Dust Filter

Bottom x 1

Manufacturer Part No:
O11D EVO White
Brand:
Product Type:
ATX MidTower Gaming Case
UPC
840353042049
Product Family:
O11D EVO Reversible
Shipping Weight:
6.2 kg
PB Part No:
CHALAN2071
Product Model:
White
Warranty: 12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

5 out of 5 Stars Based on 3 Reviews
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Stars
0

Filter Results

Do you own this product?

Write a review and go into the draw Win great prizes each month!
Displaying 1 - 3 of 3 reviews

Wicked Case!

Absolutely flawless case - customizable offering so much options for looks and builds sense for whatever your application. Totally blown away at the quality and design Lian li did for this case - You have so much cooling options with this case with many areas to mount fans - Aio coolers/radiators and water cooled systems.

And for the price it cant get better than this thanks again.

B
By: Bro_nz11 21/04/22
Verified Owner
0 out of 0 users found this review helpful
Did you find it helpful?

One of the best cases around for modularity

I was looking to do an all white build with the new 12th Gen intel platform and this case whilst on the higher priced side, allows for the best cable management along with being able to mount the GPU in the upright mode to show it off more.
Alongside the Lian Li AL-120 white fans it looks amazing and is very easy to run all cables where you need them.
I would recommend the front mesh panel if you are planning on running a high end GPU with the upright kit, temps with the glass front and 3080 Ti were sitting around 85degrees immediately when gaming in 2k Ultra on Forza Horizon 5 but with the mesh front never went above 76degrees.
This is a...view more

C
By: ChrisM552 16/03/22
0 out of 0 users found this review helpful
Did you find it helpful?

Best Case you can get

The All white 011D Evo is brilliant. My cable management is neat and all tucked away behind the board. RGB makes a mess but easily managed. Plenty of space for Fans. I got 10 in total of the Lian Li SL120 Unifans, also in White. Case is heavy fully loaded but sturdy, customizable and looks damn good.

B
By: Babarakus 13/03/22
Verified Owner
0 out of 0 users found this review helpful
Did you find it helpful?

Delivery & Pick-up

Potential courier delays: Please note that due to the high volumes currently within the NZ courier network there is potential for some deliveries to be delayed.

Delivery Estimates

The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 2 working days for North Island deliveries and 3 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.

Next Day Delivery

Need your order in a hurry? PB Tech offers next day delivery for local Auckland addresses. Simple place your order before 4pm (provided your items are in stock) and select our next day delivery option in the checkout. T&C's apply. Learn more about Next Day Delivery.

Same Day Delivery

Need your order in a hurry? PB Tech offers same day delivery for Auckland, Hamilton, Wellington and Christchurch. Simple place your order before 1pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.

Shipping Costs

Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.

To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.

Shipping Security & Insurance

All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.

1 Hour Store Pick-up / Click & Collect

You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.

Overseas Shipments

PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com

Returns & Warranty

7 day right of exchange

If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.

To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.

If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.

Please note, items purchased on finance cannot be exchanged for a gift card.

Hassle free warranty service

If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.

If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.

Returning a product / making a warranty claim

To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).

To return a product to PB Tech directly, please complete our request a return form.

Or view our returns policy for more information.

Lian Li O11D EVO Reversible White ATX MidTower Gaming Case Tempered Glass,CPU Cooler Supports Upto 167mm, Graphics Card Supported Upto 422mm, 360mm Rad Supported, 8XPCI Slots, Front: 2XUSB, 1XType C, HD Audio,

  • Brand: Lian Li
  • MPN: O11D EVO White
  • Part #: CHALAN2071
  • UPC:840353042049
Normally $239.00 $208.54 Excluding GST Normally $274.85 $239.82 Including GST

Date Created: 04:17, 16-08-2022
Product URL: https://www.pbtech.co.nz/product/CHALAN2071/Lian-Li-O11D-EVO-Reversible-White-ATX-MidTower-Gam?qr=popular_related_products
Branch New Stock On Display
Albany 0
Glenfield 1
Queen Street 2
Auckland Uni 0
Penrose 0
Henderson (Express) 0
St Lukes 0
Manukau 0
Hamilton 0
Tauranga 0
New Plymouth 0
Palmerston North 1
Petone 2
Wellington 0
Head Office 0
Hornby 2
Christchurch Central 0

Features



 

O11 Dynamic EVO

- Mid-tower chassis with two modes: Normal Mode/ Reverse Mode
- Feature multi-directional power button and movable IO module
- Front and side tempered glass panels for components and RGB display
- Supports up to 3x 360 radiators and a maximum of 10 fans
- Offers 9 storage drives mounting space
- Dual-chamber layout with hooks friendly cable management compartment

O11 DYNAMIC EVO - EVOLUTION CONTINUES

Keep cool with the O11 Dynamic series all-new design and express your preferred configuration.

 

Build with the finest materials

With only a few steps, the O11D EVO can be flipped in reverse mode to experience a seamless front and side tempered glass showroom view on the right side of the chassis.

The Pure White
Fulfill your dream's all-white build with a completely white chassis, down to the smallest detail.
- White Coated Mesh Panel
- Clear Tempered Glass
- Aluminum with white powder coating
- Snow White Interior
- Silver screws
- Light Grey Rubber Grommets
- White Dust Filter

 

Versatile orientation

With only a few steps, the O11D EVO can be flipped in reverse mode to experience a seamless front and side tempered glass showroom view on the right side of the chassis.



 

Exquisite yet functional

Following the style of the O11 Dynamic series, the aluminum panels feature an updated fine mesh which provides an optimal ratio of airflow and dust filtering.

 

Innovative and flexible configuration

Featuring a modular design, the O11D EVO offers many configuration potentials when making use of optional kits, both for air cooling and water cooling.

Air cooling - unrestricted airflow
The more direct the airflow, the better the cooling performance. Thanks to the upright GPU kit and the front mesh kit (sold separately), which makes the addition of 3 extra fans at the front possible, the O11D EVO can provide powerful and direct airflow to the GPU and the CPU.

 

AIO cooling - upgraded vertical GPU
The upgraded vertical GPU kit (sold separately) provides more room for bottom-mounted fans and radiators to increase the cooling capability and efficiency of the O11D EVO. Users can either mount the GPU vertically at the lower position which provides 50mm of clearance at the bottom of the chassis, or the upper position for 90.5mm of clearance.

 

Custom water cooling - supreme thermal control
With the upright GPU kit (sold separately), users can move their water-cooled GPU next to the motherboard. This opens up the main chamber of the chassis, allowing simpler and more efficient tube runs to reach the components, and creating a restriction-free chimney-style airflow that allows the top and bottom radiators to perform more effectively.

 

Spacious cooling support

The O11D EVO features sufficient space to accommodate 3x 360mm radiators, and up to 10 fans.

Normal mode

 

Reverse mode

 

Massive storage capacity

Multiple easily accessible storage mounting points are provided to support up to 9x SSDs or 6x HDDs + 3x SSDs.

1. Side drive tray
2.5" SSD x 4 or 3.5" HDD x 2

2. Cable management bar
2.5" SSD x 2

3. Drive cage
2.5" SSD x 3 or 3.5" HDD x 2 + 2.5" SSD x 1

4. Bottom fan bracket
2.5" SSD x 4 or 3.5" HDD x 2

 

Mounting points for a 60mm fan are provided on the hard drive cage, located in the second chamber, to improve the temperature of hard drives. The same location can be used to mount a fan hub.

 

Clean look

The O11D EVO keeps the front panel as clean as possible with a multi-directional power button that can be pressed from both the front and the side of the chassis.

 

Personalised ARGB lighting strip

The front panel LED strip features 7 built-in lighting effects which can be controlled via the M button. An 8th mode is available to enable motherboard software synchronization or L-Connect control.
To turn off the LED strip, press the M button for 3 seconds in the 8th mode.

 

Friendly building process, easily removable panels

The new mechanism to mount the side panels simplifies the process to reach the interior of the case by eliminating the need to first open the top panel.

 

Note: It is recommended to fix the two glass panel top screws during transportation.

 

Struggle-free fan brackets

While each fan bracket features a quick-release design, they can be fixed to the chassis via a straightforward process.
The side bracket can be oriented in two ways to provide more clearance for fan/radiator combinations next to the motherboard.

 

Effortless cable management

The O11D EVO optimizes the user's ability to cable manage their system with a dual-chamber design and a removable bracket.

 

Relocatable I/O port

At the bottom of the chassis, the I/O module can be relocated to 3 different locations without the use of any tools.

 

Location 1
The default mode can be reached from the front.

 

Location 2
Without any tools needed, the I/O module can be moved to the left side of the chassis.

 

Location 3
Flip the chassis and change the position of the I/O port to the right side for a PC in reverse mode.

 

Location 4
Optional accessory - Top I/O (sold separately) Optimised for PC's located on the floor, the top I/O additional accessory moves the chassis I/O at the top.
Note: To fully utilise 2 x USB 3.2 Type-C ports, the motherboard needs to have 2 built-in headers.

 

Potential for dual PSU

The drive cage can be removed to make place for a second PSU, or be switched to a lower position.

 

Anti-sag bracket for perfectly horizontal GPU

The GPU anti-sag bracket is for displaying hardware through the seamless front and side tempered glass panels.

 

In collaboration with Der8auer

In continuation of the O11D family, LIAN LI has collaborated with Der8auer and the community to finalize the O11D EVO design. Thanks to his contribution, a LIAN LI badge with De8auer's name is provided. Users can place it on the cable management bar in their desired orientation.

 

Note: Feature images are for illustrative purposes only, please refer to title, description, specifications and product images for correct model upon purchasing.

Specifications

Product Name

O11D EVO

Model

O11DEW

Colour

White

Dimension (D)

465mm x (W)285mm x (H)459mm

Material

4mm Aluminum
4mm Tempered Glass
1mm Steel Structure

Motherboard Support

E-ATX (width: under 280mm)/ATX /M-ATX/ITX

PSU Support

220mm

Fan Support

Top: 120mm x 3 or 140mm x 2
Side: 120mm x 3 or 140mm x 2
Bottom: 120mm x 3 or 140mm x 2
Rear: 120mm x 1
On Drive Cage: 60mm x 1

Radiator Support

Top: 360mm x 1 or 280mm x 1
*Total max thickness: 83.5mm

Side: 360mm x 1 or 280mm x 1
*Inner scenario total max thickness:
83mm(120mm fan on top and bottom)
63mm(140mm fan on top and bottom)
*Outer scenario total max. thickness:
120mm(120mm fan on top and bottom)
100mm(140mm fan on top and bottom)

Bottom: 360mm x 1
*Total max thickness: 87.5mm

Drive Support

Bottom:2.5" SSD x 4 or 3.5" HDD x 2
Side:2.5" SSD x 4 or 3.5" HDD x 2
Drive Cage:2.5" SSD x 3 or 3.5" HDD x 2 + 2.5" SSD x 1
Cable Management Bar:2.5" SSD x 2
*Only 9 sets of 2.5" SSD mounting pads are provided

GPU Length Clearance

422mm

CPU Height Clearance

167mm

Expansion Slots

8

I/O Ports

2 x USB 3.0
1 x USB 3.1 Type-C
1 x HD Audio/ Mic
LED Colour and Mode button
Reset Button
Power Button

Dust Filter

Bottom x 1

Date Created: 04:17, 16-08-2022
Product URL: https://www.pbtech.co.nz/product/CHALAN2071/Lian-Li-O11D-EVO-Reversible-White-ATX-MidTower-Gam?qr=popular_related_products