Nice little ITX case. But take note, something I didn't research enough. The front USB-C requires a 20 pin USB header on the motherboard, which very few ITX motherboards have. And this version comes with 2 fans and no fan controller, so check if you motherboard as 2 free fan headers. Nice little ITX case. But take note, something I didn't research enough. The front USB-C requires a 20 pin USB header on the motherboard, which very few ITX motherboards have. And this version comes with 2 fans and no fan controller, so check if you motherboard as 2 free fan headers.

A great case for itx builds but do your research first before buying. Such as:

GPU - I got 3060ti that takes two slots. Perfect size. Anything bigger or thicker will impact your cooling and PSU shroud below. Longer GPU's will run into front installed AIO cooler.

Cable management - It's ok. Wish it was better. Makes it trickier if you have extended cables for looks but thats given with itx size case.

AIO cooler/Case Fans - I installed front mount x53. No problems here but as other reviews said no fan/RGB controller so you will need splitter that sometimes comes with AIO cooler and need a motherboard that has enough fan pins to power c...view more A great case for itx builds but do your research first before buying. Such as:

GPU - I got 3060ti that takes two slots. Perfect size. Anything bigger or thicker will impact your cooling and PSU shroud below. Longer GPU's will run into front installed AIO cooler.

Cable management - It's ok. Wish it was better. Makes it trickier if you have extended cables for looks but thats given with itx size case.

AIO cooler/Case Fans - I installed front mount x53. No problems here but as other reviews said no fan/RGB controller so you will need splitter that sometimes comes with AIO cooler and need a motherboard that has enough fan pins to power case fans. I chose ASUS ROG STRIX B550-I

It's a clean looking case and have no problems with it. Plenty of builds on YouTube for this case.

By: krosswynd 17/09/21

Verified Owner

The case is absolutely amazing. Just the 2 included fans are extremely loud and I would reccomend you replace them. The case is absolutely amazing. Just the 2 included fans are extremely loud and I would reccomend you replace them.

The case looks very nice, and hides the cables very well with all the conduits in the back. I am surprised the conduit doesn't have any holes for cable ties by the right angle bend that the main motherboard power cable goes through, because that's a thick cable and it doesn't sit in the channel on its own. It made it a little difficult to get the side panel back on.

If you do a mini-ITX build, this chassis has a lot of empty space left over. If I were to do it again, I would look for an even smaller case. The case looks very nice, and hides the cables very well with all the conduits in the back. I am surprised the conduit doesn't have any holes for cable ties by the right angle bend that the main motherboard power cable goes through, because that's a thick cable and it doesn't sit in the channel on its own. It made it a little difficult to get the side panel back on.

If you do a mini-ITX build, this chassis has a lot of empty space left over. If I were to do it again, I would look for an even smaller case.

This case is big for an ITX, and has some marginal limitations on GPU shroud size, but is otherwise amazing. If you know what you need going in, it's one of the best ITX cases on the market. Tons of flexibility, super stylish, lots of little quality-of-life improvements like integrated cable routing and quick-release panels. All in all it just feels like a scaled-down mid-tower which is exactly what I wanted. Airflow is decent, and being able to fit an ATX power supply is huge as well. Front I/O is a tad minimal, but honestly I dig that. Great to have the USB-C front connector for future-proofing (just make sure your mobo has the right header...view more This case is big for an ITX, and has some marginal limitations on GPU shroud size, but is otherwise amazing. If you know what you need going in, it's one of the best ITX cases on the market. Tons of flexibility, super stylish, lots of little quality-of-life improvements like integrated cable routing and quick-release panels. All in all it just feels like a scaled-down mid-tower which is exactly what I wanted. Airflow is decent, and being able to fit an ATX power supply is huge as well. Front I/O is a tad minimal, but honestly I dig that. Great to have the USB-C front connector for future-proofing (just make sure your mobo has the right header). I think I'm gonna keep this one for a long time coming.

elegant mini cases elegant mini cases

A very nice M-ITX case. Solid construction and with great features such as built-in cable management.
I haven't used the included fans as I'm not an overclocker, but other reviewers here say they are too loud.
This case has a lot of clearance for large CPU coolers and long-form GPUs, so in this respect is closer to a full midi tower case (that is, it's not the smallest M-ITX case you can buy).

I'm two weeks in and am very happy with it and it looks fantastic. Would recommend. A very nice M-ITX case. Solid construction and with great features such as built-in cable management.
I haven't used the included fans as I'm not an overclocker, but other reviewers here say they are too loud.
This case has a lot of clearance for large CPU coolers and long-form GPUs, so in this respect is closer to a full midi tower case (that is, it's not the smallest M-ITX case you can buy).

I'm two weeks in and am very happy with it and it looks fantastic. Would recommend.

Case design is very simple but clean and pleasing to the eye, great cable management and overall fun to build in, highly recommend Case design is very simple but clean and pleasing to the eye, great cable management and overall fun to build in, highly recommend

The CAM software that comes with their i-models is just bloatware so this case is awesome on its own
. Its a little cramped with a GPU and fans/radiator at the front making this hard to work on, but other than that its very easy to build in.
Offers great thermals considing this is so small The CAM software that comes with their i-models is just bloatware so this case is awesome on its own
. Its a little cramped with a GPU and fans/radiator at the front making this hard to work on, but other than that its very easy to build in.
Offers great thermals considing this is so small

Bought this case a few weeks ago and absolutely love it. So clean and tidy looking and very easy to cable manage within it.
Case comes with two fans and unfortunately my ITX MOBO doesn't support both, so worth making sure your mobo is compatible. No issues with it at all. Silent as a mouse. Bought this case a few weeks ago and absolutely love it. So clean and tidy looking and very easy to cable manage within it.
Case comes with two fans and unfortunately my ITX MOBO doesn't support both, so worth making sure your mobo is compatible. No issues with it at all. Silent as a mouse.

Bought this nearly a month ago, easy as to put together, being m-itx obviously you're dealing with a confined space so more difficult to route all the cables neatly and put everything together than a full sized case, but as far as itx builds go this case is great for cable management.

Great price (on special), and I don't think you need to spend the extra money on the h210i, my graphics card, cooler and mobo all have RGB so no need for extra lights imho. Bought this nearly a month ago, easy as to put together, being m-itx obviously you're dealing with a confined space so more difficult to route all the cables neatly and put everything together than a full sized case, but as far as itx builds go this case is great for cable management.

Great price (on special), and I don't think you need to spend the extra money on the h210i, my graphics card, cooler and mobo all have RGB so no need for extra lights imho.