Phanteks Enthoo Pro Black Full Tower Gaming Case With Tempered Glass Window, CPU Cooler Supports Upto 193mm, GPU Supports Upto 347mm, Support Upto 360mm Radiator, 8X PCI Slots, 2X 120mm Fan Pre-installed, Front 2X USB 3.0, 2X USB 2.0 HD Aud

I have the white version of this case. Had it for a couple of years and it was a steal. I set a challenge for myself to build into this case rather than find a case that would comfortably accomodate my setup. FANTASTIC product - as I have stuffed inside it a 1600w PSU, two D5 pumps, two reservoirs, 3 Gtx980ti, a 360 rad up top and a 120 (by 45) rad at the rear, lots of petg tubing and two 2.5” ssd and 3 3.5” mechanical disks. It’s tight- but everything fits even with clearance margins. I have the white version of this case. Had it for a couple of years and it was a steal. I set a challenge for myself to build into this case rather than find a case that would comfortably accomodate my setup. FANTASTIC product - as I have stuffed inside it a 1600w PSU, two D5 pumps, two reservoirs, 3 Gtx980ti, a 360 rad up top and a 120 (by 45) rad at the rear, lots of petg tubing and two 2.5” ssd and 3 3.5” mechanical disks. It’s tight- but everything fits even with clearance margins.

The case is very spacious and easy to route cables with lots of space to hide useless cables on a non modular power supply, Although the rubber grommets are a little too far away from the ports on my ATX mother board I think it would work a lot better with a E-ATX mother board due to the increase in size between the two. The case has great air flow and lot of hard drive slots for all your storage needs and if you don't have many hard drives the drive cages can be removed easily with a few thumb screws. This case is just so modular and works well with anything in my opinion. The case is very spacious and easy to route cables with lots of space to hide useless cables on a non modular power supply, Although the rubber grommets are a little too far away from the ports on my ATX mother board I think it would work a lot better with a E-ATX mother board due to the increase in size between the two. The case has great air flow and lot of hard drive slots for all your storage needs and if you don't have many hard drives the drive cages can be removed easily with a few thumb screws. This case is just so modular and works well with anything in my opinion.

This case is offered at a very good price and it has quite a bit of room inside. The six 2.5"/3.5" drive bays are great and easy to remove and install, and the WD 3.5" HDD I bought fits perfectly. The 6-fan (3-pin) PWM hub is a great addition to the case as it allows multiple case fan connections, which is crucial. I recommend this case for a first build or if you are on a budget, or if you are simply looking for an inexpensive case (like me). This case is offered at a very good price and it has quite a bit of room inside. The six 2.5"/3.5" drive bays are great and easy to remove and install, and the WD 3.5" HDD I bought fits perfectly. The 6-fan (3-pin) PWM hub is a great addition to the case as it allows multiple case fan connections, which is crucial. I recommend this case for a first build or if you are on a budget, or if you are simply looking for an inexpensive case (like me).

The 3.5" bays have little plastic nubs that were supposed to fit into OLD 3.5" HDDs' holes only. Newer HDD models won't fit and you have to break the little nubs off the plastic bay for the HDD to sit properly. Otherwise decent for the cost. The 3.5" bays have little plastic nubs that were supposed to fit into OLD 3.5" HDDs' holes only. Newer HDD models won't fit and you have to break the little nubs off the plastic bay for the HDD to sit properly. Otherwise decent for the cost.

Upgraded my 2700x stock cooler to a noctua d15 so needed the room that this case provides. I also added another 120mm fan from pbtech to supplement the front existing front fan. Overall, good air flow as now my 2700x idles at around 30c. I also get higher boosts clocks to 4.35ghz without any overclock. I believe good airflow and a decent air cooler is the main reason for this so I’m really happy with my purchase. Good cable management options with this case as it provides good access from psu to motherboard etc. another huge benefit of this case is how the glass panels opens with two screws. Simple case with huge added benefits. I’d recommend...view more Upgraded my 2700x stock cooler to a noctua d15 so needed the room that this case provides. I also added another 120mm fan from pbtech to supplement the front existing front fan. Overall, good air flow as now my 2700x idles at around 30c. I also get higher boosts clocks to 4.35ghz without any overclock. I believe good airflow and a decent air cooler is the main reason for this so I’m really happy with my purchase. Good cable management options with this case as it provides good access from psu to motherboard etc. another huge benefit of this case is how the glass panels opens with two screws. Simple case with huge added benefits. I’d recommend to anyone consider upgrading to a larger full tower. Been using the tower since 28/12/2019.

One of the few cases left with dvd drive bays. Good amount of harddrive bays and discrete SSD mount points / places. Glassdoor does not come off easily at all, so makes it awkward to do motherboard install, while trying not to wrench the door off. Otherwise a good case One of the few cases left with dvd drive bays. Good amount of harddrive bays and discrete SSD mount points / places. Glassdoor does not come off easily at all, so makes it awkward to do motherboard install, while trying not to wrench the door off. Otherwise a good case

Bought this because I needed a case for an E-ATX Motherboard and there are not many options available without spending a lot more money. The build quality and finish are superb, the materials look and feel expensive, the space and flexibility for your build are very impressive. Why you would want to spend more on another case I'm not sure. Very happy with my purchase and I thoroughly recommend this product. Bought this because I needed a case for an E-ATX Motherboard and there are not many options available without spending a lot more money. The build quality and finish are superb, the materials look and feel expensive, the space and flexibility for your build are very impressive. Why you would want to spend more on another case I'm not sure. Very happy with my purchase and I thoroughly recommend this product.

Holy crap this case is huge, breeze to work with though Phanteks done a great job of designing it. Holy crap this case is huge, breeze to work with though Phanteks done a great job of designing it.

Really happy with the product when it arrived. Lots of space and ability to hide ugly wires, and it looks really nice too. Really happy with the product when it arrived. Lots of space and ability to hide ugly wires, and it looks really nice too.

A very good case that take all my extra HDs A very good case that take all my extra HDs

This is an excellent case with lots of room and very well laid out and very easy to work in. Be warned, the photos do not do this case justice it is very large with a reasonable weight to it all. This is an excellent case with lots of room and very well laid out and very easy to work in. Be warned, the photos do not do this case justice it is very large with a reasonable weight to it all.

I needed a case with room for an optical drive. It has plenty of slots for those and as per other reviews, this case is HUGE! With so much room it made building a breeze. Even has additional areas for SSD’s, not just in the normal chassis area. Looks awesome, the finish looks great with that brushed steel look, as does the glass panel look great. Really impressed with the kit box that came with it with the extra screws, cable ties etc too.

For the price I didn’t mind that it was way bigger than I needed. I needed a case with room for an optical drive. It has plenty of slots for those and as per other reviews, this case is HUGE! With so much room it made building a breeze. Even has additional areas for SSD’s, not just in the normal chassis area. Looks awesome, the finish looks great with that brushed steel look, as does the glass panel look great. Really impressed with the kit box that came with it with the extra screws, cable ties etc too.

For the price I didn’t mind that it was way bigger than I needed.