GIVE FEEDBACK

CRYORIG H7 Plus CPU Cooler With 2 X 120mm Fan,Breaking Design Molds Efficiency by Innovation, Jet Fin Acceleration System Extra Air ,145mm Height, for Intel 1150, 1151, 1155, 1156, AMD FM1, FM2/+, AM2/+, AM3/+, AM4

CRYORIG H7 Plus CPU Cooler With 2 X 120mm Fan,Breaking Design Molds Efficiency by Innovation, Jet Fin Acceleration System Extra Air ,145mm Height, for Intel 1150, 1151, 1155, 1156, AMD FM1, FM2/+, AM2/+, AM3/+, AM4
PB Tech price: PB Tech price:
$69 00  +GST $79 35  inc GST
  • Overview
  • Features
  • Specifications
  • Reviews
  • Q & A

Generating Print Page

CRYORIG H7 Plus CPU Cooler With 2 X 120mm Fan,Breaking Design Molds Efficiency by Innovation, Jet Fin Acceleration System Extra Air ,145mm Height, for Intel 1150, 1151, 1155, 1156, AMD FM1, FM2/+, AM2/+, AM3/+, AM4

CRYORIG H7 Plus CPU Cooler With 2 X 120mm Fan,Breaking Design Molds Efficiency by Innovation, Jet...

  • Brand: CRYORIG
  • MPN: CR-H7PA
  • Part #: FANCRG7002
  • UPC:
  • Radiator Size:N/A
  • Sound Level (Roughly):Adjustable
  • Number of Fans:2
  • LED Colour:N/A
  • Fan Size:120mm
  • Bearing Type Variation:N/A

What PB Tech customers are saying about this product...See More Reviews

"Great cooler."

G
By: Guest 03/02/20

"I previously had an AIO water cooling solution, and it after much tinkering, it was still firing all fans really loudly. However this cooler is really quiet, great performance, and...view more"

C
By: ChrisG811 14/12/19

"The CRYORIG H7 Plus is a good CPU cooler and definitely a bang for your buck, but it's worth checking out your case dimensions because it's quite a tall cooler. I also had a...view more"

I
By: IsaacT69 28/11/19

Features

 

Direct Air Tunnel Effect, Aligned System Airflow

By adding one additional fan the full fan system aligns with your system fan, to concentrate and expel exhaust heat. This increases the overall efficiency of the whole system airflow.

 

Enhanced Efficiency with Hive Fin Technology

CRYORIG H Series coolers feature our proprietary Hive Fin™ structure. This design allows for a combination of Jet Fin Acceleration™ and Turbulence Reduction, as well as strengthening structural strength of the fin stacks. Combined together, the Hive Fin™ design brings cool innovation.

 

Jet Fin Acceleration System™

By utilizing a larger air intake and narrower air exhaust section on the fins, compresses the air to move faster and more efficiently out of the heatsink.

 

Turbulence Reduction System

Utilizing a bee hive shaped structure at the front air intake of the heatsink, lowers air turbulence and assists airflow to move through the full length of the heatsink.

 

Optimized Heatpipe Positioning Total CPU Coverage

The H7's Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity.

 

Unmatched Compatibility Zero RAM Interference

Focusing on providing the widest range of compatibility, the H7 utilizes an asymmetric slanted heatpipe layout to move the heatsink away from the RAM zone, Offering optimal compatibility for RAM with tall heat spreaders on both Intel™ 115X and AMD platforms.

 

The Compact Tower That Fits

The CRYORIG H7 has compact compatibility written in it's design. Only 145mm in height the H7 is one of the smallest 120mm fan class tower heatsinks on the market. The H7 will fit in almost all mid-tower PC chassis. The H7 can deliver much needed tower grade cooling performance in tight spaces.

 

Quad Air Inlet+TM, Extra Air Extra Performance

CRYORIG's proprietary Quad Air Inlet™ system features four strategically placed aerodynamic air inlet that allows for extra air intake. The additional air intake allows the QF series fan to have a higher air output volume for its fan diameter, which equals better temperatures for your CPU heatsink and more air exchanged for your system case.

Specifications

Heatsink Specification

Dimension ( with fan )

L126 mm x W123 mm x H145 mm

Weight ( with fan )

845 g

Weight ( without fan )

577 g

Heat pipes

6mm heatpipe x 3 units

Fin

T = 0.4 mm ; Gap = 2.2 mm

Fin Pcs

40 pcs

Copper Base

C1100 Pure copper nickel plated

RAM Height Limit

Limitless

TDP

150 W

Fan Specification

Model

QF120 Black Balance

Dimension

L120 mm x W120 mm x H25.4 mm

Weight

134 g

Rated Speed

300 ~ 1600 RPM ±10 %

Noise Level

25 dBA

Air Flow

59 CFM

Air Pressure

1.65 mmH2O

Ampere

0.16 A

Motherboard Compatibility

Intel

1150, 1151, 1155, 1156

AMD

FM1, FM2/+, AM2/+, AM3/+, AM4

What's In The Box

H7 Plus x 1
X-Bar™ Backplate x 1
Screw Pillars x 4
Screw Sleeves x 4
PWM Y-Cable x 1
CRYO-Paste CP7 x 1
Installation Guide x 1
Product Registration Card x 1

Manufacturer Part No: CR-H7PA Brand: CRYORIG Product Type: CPU Cooler
UPC - Product Family: H7 Shipping Weight: 1.141 kg
PB Part No: FANCRG7002 Product Model: Plus

Warranty: 12 months local warranty *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

4.5 out of 5 StarsBased on 15 Reviews

5 Stars
8
4 Stars
5
3 Stars
2
2 Stars
0
1 Star
0

Filter Results

Do you own this product?

Write a review and go into the draw to win great prizes each month! Learn more WRITE A REVIEW
Displaying 1 - 12 of 15 reviews

Awesome Product - Value for Money

Have a Coolermaster 550 Silencio case so it doesn't have that many fans/flow not that good for ambient temps.
For Scum I was getting around 70C+ on stock fan which was setting off mb alarm, so I had to open the case door and wind up Fan Xpert to full noise - which defeated the purpose of a silent(ish) case.
The H7 + has it running closer to 50-60C not running at full, and with the door closed, in fact I hear the GPU fans more than those.

Great purchase - IMO total value for money, clears ram as described, I'm pretty uncoordinated so the stated 4 min install was never going to happen, had to ask the Mrs to apply pressure to the back plat...view more

G
By: Guest 19/03/19
1 out of 1 user found this review helpful
Did you find it helpful?

Cryorig

Great cooler.

G
By: Guest 03/02/20
0 out of 0 users found this review helpful
Did you find it helpful?

Okay cooling but sometimes a bit shaky

Straight up, this cooler has the worst mounting system i have ever seen, where the screws that held on the cooler were screwed in from the back of the motherboard. This is an issue because it is hard to install the cooler if you only have 2 hands, as you have to hold it in place, where it has a chance of moving allowing air between the thermal paste and the base of the cooler. This also means that the cooler has to be installed upside-down on a table. Also because of the rear mounting mechanism, a thermal paste change would require the entire motherboard to be removed.

The cooling performance of it is average, however, on a synthetic load ...view more

S
By: ShivneelR 21/12/19
0 out of 0 users found this review helpful
Did you find it helpful?

Great performance and cooling

I previously had an AIO water cooling solution, and it after much tinkering, it was still firing all fans really loudly. However this cooler is really quiet, great performance, and I'm really impressed. Overall temp is lower than previously, and I can overclock more too.

C
By: ChrisG811 14/12/19
0 out of 0 users found this review helpful
Did you find it helpful?

Good CPU cooler but large

The CRYORIG H7 Plus is a good CPU cooler and definitely a bang for your buck, but it's worth checking out your case dimensions because it's quite a tall cooler. I also had a problem with the cooler blocking the 1st DIMM slot on the motherboard (ASUS PRIME-A Z390) so anyone buying the same motherboard as me should take that into consideration if you're planning to use all DIMM slots.

I
By: IsaacT69 28/11/19
0 out of 0 users found this review helpful
Did you find it helpful?

Performs well

I was talked into getting this cooler for my i9 9900k over a small AIO water cooler. I'd had a bad experience with the CRYORIG C7 fan cutting out so I was doubtful. The guy in store who helped me was really awesome and took some time to look up my mATX case online to make sure there would be sufficient room to install it. He advised that this cooler would perform better than a small AIO watercooler, and I would have to go for a large water cooling unit if I wanted to overclock my processor. I didn't want to pay the extra money for that so I settled on this cooler.

Installation was a little tricky - but largely because I didn't remove the m...view more

G
By: Guest 12/11/19
0 out of 0 users found this review helpful
Did you find it helpful?

Great performance and very quiet

Installed this cooler on 26/06/2019 to replace the stock cooler which had died. (It's an older rig which I still use for gaming). My CPU (i5-2300) idles at around 27°C and under load when running SCUM, EFT, Insurgency: Sandstorm, etc never exceeds 50°C. Very quiet and relatively easy to install (can be intimidating at first).

Initially I had my doubts as to whether or not this would fit, as the cooler is an absolute unit (be sure to check the dimensions listed before purchasing). This cooler easily fits inside the Aerocool Bolt mid tower (https://www.pbtech.co.nz/product/CHAAER0002/Aerocool-Bolt-Mid-Tower-Support-ATX-MATX-MINI-ITX), and ...view more

Z
By: ZacharyM48 07/11/19
Verified Owner
0 out of 0 users found this review helpful
Did you find it helpful?

Air vs Water

Was convinced by a PB tech salesperson that this air cooler was better than water cooling (unless you go all the way, all out with it) as it is quieter and flows better. Haven't gone back since. Would highly recommend! Very quiet :)

G
By: Guest 24/10/19
0 out of 0 users found this review helpful
Did you find it helpful?

Good cheap PC fan

This cpu cooler is a great upgrade from stock intel fans. I have been getting lots of noise from my old one so I upgraded to this big fella. It really gets the airflow working especially with it's dual fans.

C
By: CharlieF31 09/09/19
Verified Owner
0 out of 0 users found this review helpful
Did you find it helpful?

Ok

I have some doubts with this cooler. Have fitted to 8700k and thermal throttles without overclock in under a minute when running cinebench, a bit of googling and there are others with similar issues.

Might re-check my install, paste and also if having 4 fans in a tunnel formation is creating inefficient or turbulent air.

J
By: JonoR2 09/09/19
Verified Owner
0 out of 0 users found this review helpful
Did you find it helpful?

Cryorig H7 Plus is a beast of a brick

Cooler cools for sure havent seem temps above 36 degrees since installing it and installing was a cool breeze as well. only cons really is that it is quite the brick takes a bit of space blocking off one of my ram slots and its presence its like a borg ship entering the atmosphere.

H
By: HamishC54 05/09/19
Verified Owner
0 out of 0 users found this review helpful
Did you find it helpful?

Power of a Beast, sound of....'Nothing'

It's so much quieter than my last fan. Nice to finally have a build that is roaring loud when I turn it on.

G
By: Guest 09/08/19
0 out of 0 users found this review helpful
Did you find it helpful?

Customer Questions & Answers

Want to know something about this product? Ask a question which other users may be able to answer.
A
Yes.
Answered by: PB Tech on 20 April 2020

CRYORIG H7 Plus CPU Cooler With 2 X 120mm Fan,Breaking Design Molds Efficiency by Innovation, Jet Fin Acceleration System Extra Air ,145mm Height, for Intel 1150, 1151, 1155, 1156, AMD FM1, FM2/+, AM2/+, AM3/+, AM4

  • Brand: CRYORIG
  • MPN: CR-H7PA
  • Part #: FANCRG7002
  • UPC:
PB Tech price: $69.00 Excluding GSTPB Tech price:$79.35 Including GST
Date Created: 07:02, 29-05-2020
Product URL: https://www.pbtech.co.nz/product/FANCRG7002/CRYORIG-H7-Plus-CPU-Cooler-With-2-X-120mm-FanBreak?qr=country-selector
Branch
New Stock
On Display
Albany
0
North Shore
0
Auckland CBD
0
Auckland Uni
0
Penrose
0
Henderson
0
Manukau
0
Hamilton
0
Tauranga
0
New Plymouth
0
Wellington
0
Christchurch
0
Head Office (Web)
0

Features

 

Direct Air Tunnel Effect, Aligned System Airflow

By adding one additional fan the full fan system aligns with your system fan, to concentrate and expel exhaust heat. This increases the overall efficiency of the whole system airflow.

 

Enhanced Efficiency with Hive Fin Technology

CRYORIG H Series coolers feature our proprietary Hive Fin™ structure. This design allows for a combination of Jet Fin Acceleration™ and Turbulence Reduction, as well as strengthening structural strength of the fin stacks. Combined together, the Hive Fin™ design brings cool innovation.

 

Jet Fin Acceleration System™

By utilizing a larger air intake and narrower air exhaust section on the fins, compresses the air to move faster and more efficiently out of the heatsink.

 

Turbulence Reduction System

Utilizing a bee hive shaped structure at the front air intake of the heatsink, lowers air turbulence and assists airflow to move through the full length of the heatsink.

 

Optimized Heatpipe Positioning Total CPU Coverage

The H7's Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity.

 

Unmatched Compatibility Zero RAM Interference

Focusing on providing the widest range of compatibility, the H7 utilizes an asymmetric slanted heatpipe layout to move the heatsink away from the RAM zone, Offering optimal compatibility for RAM with tall heat spreaders on both Intel™ 115X and AMD platforms.

 

The Compact Tower That Fits

The CRYORIG H7 has compact compatibility written in it's design. Only 145mm in height the H7 is one of the smallest 120mm fan class tower heatsinks on the market. The H7 will fit in almost all mid-tower PC chassis. The H7 can deliver much needed tower grade cooling performance in tight spaces.

 

Quad Air Inlet+TM, Extra Air Extra Performance

CRYORIG's proprietary Quad Air Inlet™ system features four strategically placed aerodynamic air inlet that allows for extra air intake. The additional air intake allows the QF series fan to have a higher air output volume for its fan diameter, which equals better temperatures for your CPU heatsink and more air exchanged for your system case.

Specifications

Heatsink Specification

Dimension ( with fan )

L126 mm x W123 mm x H145 mm

Weight ( with fan )

845 g

Weight ( without fan )

577 g

Heat pipes

6mm heatpipe x 3 units

Fin

T = 0.4 mm ; Gap = 2.2 mm

Fin Pcs

40 pcs

Copper Base

C1100 Pure copper nickel plated

RAM Height Limit

Limitless

TDP

150 W

Fan Specification

Model

QF120 Black Balance

Dimension

L120 mm x W120 mm x H25.4 mm

Weight

134 g

Rated Speed

300 ~ 1600 RPM ±10 %

Noise Level

25 dBA

Air Flow

59 CFM

Air Pressure

1.65 mmH2O

Ampere

0.16 A

Motherboard Compatibility

Intel

1150, 1151, 1155, 1156

AMD

FM1, FM2/+, AM2/+, AM3/+, AM4

What's In The Box

H7 Plus x 1
X-Bar™ Backplate x 1
Screw Pillars x 4
Screw Sleeves x 4
PWM Y-Cable x 1
CRYO-Paste CP7 x 1
Installation Guide x 1
Product Registration Card x 1

Date Created: 07:02, 29-05-2020
Product URL: https://www.pbtech.co.nz/product/FANCRG7002/CRYORIG-H7-Plus-CPU-Cooler-With-2-X-120mm-FanBreak?qr=country-selector
Your recently viewed items (1)
Home PC Parts Cooling Air Cooling CRYORIG H7 Plus CPU Cooler With 2 X 120mm Fan,Breaking...
Customer Testimonials - See More