Six easy payments of $23.49 per week*
Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.
Click the button below or select Laybuy as your payment method during the checkout process.
If you do not have a Laybuy account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Laybuy
Five easy payments of $28.19 per fortnight*
humm lets you spread the cost of your purchase over 5 or 10 interest free payments.
Click the button below or select humm as your payment method during the checkout process.
If you do not have a humm account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about humm
DEEPCOOL RF120 FS Static RGB Fan , 3 Pack
Lian Li UNI FAN SL120 Digital Addressable RGB 120 Fan with...
Cooler Master MasterFan MF120 Halo 3 in 1 Kit ARGB PWM 120mm ARGB...
DEEPCOOL XFAN 120 120mm Hydro Bearing Case Fan with 4-pin Molex...
DEEPCOOL RF 120 Blue RF 120 Blue LED, 120mm (Single Unit)
"Easy to install and the daisy chaining is such a great idea ...view more"
"The best fans by far, Easy and clean cable Management. Efficient and very quiet."
"Literally the one of best case fans you can buy right now, especially if you are running a case like the O-11 Dynamic with 9 fans. Makes cable management exponentially easier since ...view more"
A modular approach to fan design to enhance the user experience and to create a cable-free, hassle-free, and easier assembly process.
An Enjoyable Experience
Intuitive Control Interface
32 LEDs Per Fan
Quiet Operation
Sandblasted Aluminum Parts
A Quicker and Easier Installation Process
- slide-in/ interlocking mechanism
- PIN-to-PIN contact point for receiving power and signal
- reduced need for mounting screws
Each UNI FAN features a cable module with a PIN-to-PIN contact point to receive power and signal.
Each cable module can support up to 4 UNI FAN SL120s, allowing users to choose to use either a single fan or up to 4 fans in one go.
When using the UNI FAN SL120 in a custom watercooling configuration, make sure that the fittings on the radiators do not interfere with the contact point on the side of the fans.
We suggest to use the insulating tape to isolate contact points.
The 32 addressable RGB LEDs embedded in each fan (16 LEDs on either side of the frame) ensure vibrant lighting effects.
The 16 LEDs on each side shine through a diffuser, ensuring a smooth light is visible from all angles.
With the toggle of a switch, changing control between motherboard software and the L-Connect is a breeze.
The 4 possible clusters of UNI FANs that can be connected to the controller are reflected on the L-Connect interface. VIA L-Connect, users can adjust a single UNI FAN SL120, a single cluster of up to 4 fans, or all 4 clusters of fans according to their needs.
A close look at what makes SL120 operate efficiently.
Machine-detailed aluminium frame
Aluminium logo badge
CD texture for an enhanced quality feel
For user who do not want to use the controller box, the UNI FAN SL120's RGB connector can also be connected directly to the motherboard 5V header. For motherboard that supports 5v ARGB LEDs, it should come with an adaptor cable as picture shown above. The ARGB connector from the SL120 can connect to this adaptor cable then directly to the motherboard 5v 3 pin header.
To fully control up to 16 UNI FAN SL120s (4 fans each cluster) in one go either through the built-in L-Connect software or the motherboard software, users must use the designated UNI FAN controller included in the 3 pack packages. Please note that the single pack version does not contain this controller and thus we recommend users to purchase at least one 3 pack for their build.
Model
UNI FAN SL120
Number of Fans
3 Pack
UNI FAN Controller
Included
Colour
Black
Fan Dimension
122.8 X 122.4 X 25 ( mm )
Rated Voltage
DC 12V(FAN) & 5V(LED)
Fan Speed
800~1900RPM
Max. Air Pressure
2.54mmH2O
Max. Air Flow
58.54CFM
Acoustical Noise (Min-Max.)
17dB ~ 31dB
Locked Current
>= 0.5mA
Bearing Type
Fluid Dynamic Bearing(FDB)
Operation Voltage
DC 12V & 5V
Start-up Voltage
DC 6.0V
Input Current
0.18A(FAN) / 0.6A (LED)
Input Power
3.5Watt
Note
When using the UNI FAN SL120 in a custom watercooling configuration, make sure that the fittings on the radiators do not interfere with the contact point on the side of the fans. Lian Li suggest to use the insulating tape to isolate contact points.
| Manufacturer Part No: | G99.12UF3B.00 | Brand: | Lian Li | Product Type: | - |
| UPC | 840353040212 | Product Family: | UNI FAN | Shipping Weight: | 0.8 kg |
| PB Part No: | FANLAN0004 | Product Model: | SL120 | ||
| Warranty: | 12 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
||||
The best fans by far, Easy and clean cable Management. Efficient and very quiet.
Multi colour doesn't work through mystic light.
Convenient to link all 3 to one cable, as well as supplying the cables to wire them separately
Literally the one of best case fans you can buy right now, especially if you are running a case like the O-11 Dynamic with 9 fans. Makes cable management exponentially easier since you can connect 3 fans to the same two cables. A must buy!
So easy to install makes the cabling so much less clustered in the back, rgb is simple to setup yet looks great.
Easy to install and the daisy chaining is such a great idea for fan heavy builds.
The L Connect software needs some work, for example if you 'Apply All' for the effects, then it resets the fan configurations, which in turn means some of the effects look a bit weird. You're also better off setting it up to boot on Windows start-up.
I have a Corsair 4000x RGB case, and the frame for the front fans obscures a reasonable amount of the RGB channels.
A modular approach to fan design to enhance the user experience and to create a cable-free, hassle-free, and easier assembly process.
An Enjoyable Experience
Intuitive Control Interface
32 LEDs Per Fan
Quiet Operation
Sandblasted Aluminum Parts
A Quicker and Easier Installation Process
- slide-in/ interlocking mechanism
- PIN-to-PIN contact point for receiving power and signal
- reduced need for mounting screws
Each UNI FAN features a cable module with a PIN-to-PIN contact point to receive power and signal.
Each cable module can support up to 4 UNI FAN SL120s, allowing users to choose to use either a single fan or up to 4 fans in one go.
When using the UNI FAN SL120 in a custom watercooling configuration, make sure that the fittings on the radiators do not interfere with the contact point on the side of the fans.
We suggest to use the insulating tape to isolate contact points.
The 32 addressable RGB LEDs embedded in each fan (16 LEDs on either side of the frame) ensure vibrant lighting effects.
The 16 LEDs on each side shine through a diffuser, ensuring a smooth light is visible from all angles.
With the toggle of a switch, changing control between motherboard software and the L-Connect is a breeze.
The 4 possible clusters of UNI FANs that can be connected to the controller are reflected on the L-Connect interface. VIA L-Connect, users can adjust a single UNI FAN SL120, a single cluster of up to 4 fans, or all 4 clusters of fans according to their needs.
A close look at what makes SL120 operate efficiently.
Machine-detailed aluminium frame
Aluminium logo badge
CD texture for an enhanced quality feel
For user who do not want to use the controller box, the UNI FAN SL120's RGB connector can also be connected directly to the motherboard 5V header. For motherboard that supports 5v ARGB LEDs, it should come with an adaptor cable as picture shown above. The ARGB connector from the SL120 can connect to this adaptor cable then directly to the motherboard 5v 3 pin header.
To fully control up to 16 UNI FAN SL120s (4 fans each cluster) in one go either through the built-in L-Connect software or the motherboard software, users must use the designated UNI FAN controller included in the 3 pack packages. Please note that the single pack version does not contain this controller and thus we recommend users to purchase at least one 3 pack for their build.
Model
UNI FAN SL120
Number of Fans
3 Pack
UNI FAN Controller
Included
Colour
Black
Fan Dimension
122.8 X 122.4 X 25 ( mm )
Rated Voltage
DC 12V(FAN) & 5V(LED)
Fan Speed
800~1900RPM
Max. Air Pressure
2.54mmH2O
Max. Air Flow
58.54CFM
Acoustical Noise (Min-Max.)
17dB ~ 31dB
Locked Current
>= 0.5mA
Bearing Type
Fluid Dynamic Bearing(FDB)
Operation Voltage
DC 12V & 5V
Start-up Voltage
DC 6.0V
Input Current
0.18A(FAN) / 0.6A (LED)
Input Power
3.5Watt
Note
When using the UNI FAN SL120 in a custom watercooling configuration, make sure that the fittings on the radiators do not interfere with the contact point on the side of the fans. Lian Li suggest to use the insulating tape to isolate contact points.
