Departments
Five easy payments of $5.60 per fortnight*
humm lets you spread the cost of your purchase over 5 or 10 interest free payments.
Click the button below or select humm as your payment method during the checkout process.
If you do not have a humm account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about humm
Six easy payments of $4.66 per week*
Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.
Click the button below or select Laybuy as your payment method during the checkout process.
If you do not have a Laybuy account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Laybuy
"Used this for an AOC monitor that didn't have a VESA mount and has a stand that can't be removed. Attaching the adapter was a little but fiddly, but once it is set up it holds the ...view more"
"Comes with instructions showing a range of mounting options which I wondered about until I realised the configuration I had chosen meant that access to the power and video connecti ...view more"
"A warning to people who have monitors where the plugs need to be plugged in a perpendicular direction into the monitor, these adapter arms may be difficult to arrange in such a way ...view more"
BRATECK Universal Montior Adapter Kit.
For monitors without VESA holes. Fits screens thinkness 25.5mm to 45.5mm. Mount to VESA mount 75x75 to 100x100mm.
Monitor Adapter Kit
The XMA-01 offers an innovative mounting solution for you to mount monitors without VESA compatibility to a monitor desk or wall mount. The adapter is designed to fit any VESA monitor mount with 75x75mm and 100x100mm mounting holes and includes all required screws and other hardware for assembly. The XMA-01 uses a four-arm system to adjust to the different external dimensions of flat-panel monitors and clamp them in place securely.
This adapter supports most 13"-27" monitors with a thickness of 25.5mm to 45.5mm. It allows your non-VESA monitor to be mounted on almost any ergonomic monitor arm and to be adjusted for improved viewing comfort.
Manufacturer Part No: | XMA-01 | Brand: | Brateck | Product Type: | - |
UPC | - | Product Family: | Lumi | Shipping Weight: | 0.765 kg |
PB Part No: | MOABRA1112 | Product Model: | XMA-01 | ||
Warranty: | 60 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
Decided to mount both of my monitors and to rid of its stand and thick old telephone books underneath on the desk.
Purchased 2 Adapter Kit for monitors without VESA holes. This give you the option to choose/keep any monitor without restriction. The kit comes with three different sizes screws to perfectly fit to your monitor/s. I've two Dell ST2320L screens @23", approximately 1-1.5 cm (under an inch) all around the front panel, curve-out midway-back where all the connectors are thus, not under the minimum criteria of the kit of 2.55 cm.
Notes: to correctly measure monitor's depth, place back (rounded, in my case) down on a flat surface to...view more
Decided to mount both of my monitors and to rid of its stand and thick old telephone books underneath on the desk.
Purchased 2 Adapter Kit for monitors without VESA holes. This give you the option to choose/keep any monitor without restriction. The kit comes with three different sizes screws to perfectly fit to your monitor/s. I've two Dell ST2320L screens @23", approximately 1-1.5 cm (under an inch) all around the front panel, curve-out midway-back where all the connectors are thus, not under the minimum criteria of the kit of 2.55 cm.
Notes: to correctly measure monitor's depth, place back (rounded, in my case) down on a flat surface to measure-up. Unless the monitor/s is flat all the way around (front & back)? Also, take into account the weight of each monitor prior to purchasing a 'desk mount arm/s' hence, majority holds up to 8kg for each arm so there shouldn't be any issue.
Large-size screws were used for the bottom and mid-size screws for the top. Clamping formats includes 'X', 'Y', inverted 'Y' and 'I/II' to securely holds the monitor. I've used the 'Y' format and securing with bolts (not included) for extra security. The 'Y' format does not cover/interfere with fitted connectors on the back of my monitors.
Value for money - for under $86 (inclusive of 'Dual Monitor Desk Mount Arms' purchased elsewhere), desk is more organised, creating more room, providing correct height and flexibility from both monitors.
Dispatch date as stated, it took a bit longer to receive due to COVID-19 (acceptable).
Highly recommend this kit for monitors without VESA holes from PBTech - reasonable priced and great service (email/progress/tracking received throughout).
Used this for an AOC monitor that didn't have a VESA mount and has a stand that can't be removed. Attaching the adapter was a little but fiddly, but once it is set up it holds the monitor quite securely, it's a little bit loose but helped me not have to upgrade to a whole new monitor just yet. Used this for an AOC monitor that didn't have a VESA mount and has a stand that can't be removed. Attaching the adapter was a little but fiddly, but once it is set up it holds the monitor quite securely, it's a little bit loose but helped me not have to upgrade to a whole new monitor just yet.
Comes with instructions showing a range of mounting options which I wondered about until I realised the configuration I had chosen meant that access to the power and video connections was blocked! Easy to change and adjust and my screen is now securely held in place. Plenty of spare parts so you can pick the configuration you need. Simple, robust and I shouldn't need to touch it until my screen needs updating! Comes with instructions showing a range of mounting options which I wondered about until I realised the configuration I had chosen meant that access to the power and video connections was blocked! Easy to change and adjust and my screen is now securely held in place. Plenty of spare parts so you can pick the configuration you need. Simple, robust and I shouldn't need to touch it until my screen needs updating!
A warning to people who have monitors where the plugs need to be plugged in a perpendicular direction into the monitor, these adapter arms may be difficult to arrange in such a way where it doesn't block your ports, compared to monitors where cables are plugged in from the bottom-up. Buyer beware A warning to people who have monitors where the plugs need to be plugged in a perpendicular direction into the monitor, these adapter arms may be difficult to arrange in such a way where it doesn't block your ports, compared to monitors where cables are plugged in from the bottom-up. Buyer beware
Working well with my 24'' monitor.
But one awkward part is there are buttons under my monitor so it's kinda hard to position the arms. Be aware of that.
Working well with my 24'' monitor.
But one awkward part is there are buttons under my monitor so it's kinda hard to position the arms. Be aware of that.
Would buy again it did a good job. Would buy again it did a good job.
Already had a set of these mounts for attaching a 27" Samsung screen (without no VESA mounting holes) to my dual monitor arm, then scored another Samsung screen with no VESA mount points, so got another set.
They hold the screens securely and work well. I haven't had any problems with them.
Already had a set of these mounts for attaching a 27" Samsung screen (without no VESA mounting holes) to my dual monitor arm, then scored another Samsung screen with no VESA mount points, so got another set.
They hold the screens securely and work well. I haven't had any problems with them.
Good product, though I did have to place spacing material (folded cardboard) between the monitor and a couple of the 'hooks' as the monitor thickness was less than the 'hooks' minimum spacing. For a 'Universal' product, this isn't unexpected and does not detract from it's function, which it does very well.
I'm very happy.
Good product, though I did have to place spacing material (folded cardboard) between the monitor and a couple of the 'hooks' as the monitor thickness was less than the 'hooks' minimum spacing. For a 'Universal' product, this isn't unexpected and does not detract from it's function, which it does very well.
I'm very happy.
Purchased a dual laptop and monitor stand. My montor did not have a vesa connection so purchased one of these. Works fine. Helped organise and sort out my desk. Purchased a dual laptop and monitor stand. My montor did not have a vesa connection so purchased one of these. Works fine. Helped organise and sort out my desk.
Good Product. Even managed to cope wioth the curve on the back of the screen Good Product. Even managed to cope wioth the curve on the back of the screen
Same experience as Bryce. It really depends on what type of monitor and in my case the mount plate itself. No matter how I position the bottom bars they always block one of the ports (either the power port or the HDMI on a Samsung BX2331). The top of the monitor is also too thin for the lugs to hold (this is my bad since this is smaller than the product spec). At the end I cut some cardboard to increase the thickness of the monitor and solved both of the problems.
One other complaint is that the spanner tool included is terrible to use because of the design of the nuts and bolts. It really tests your patience.
Would I recommend this pro...view more
Same experience as Bryce. It really depends on what type of monitor and in my case the mount plate itself. No matter how I position the bottom bars they always block one of the ports (either the power port or the HDMI on a Samsung BX2331). The top of the monitor is also too thin for the lugs to hold (this is my bad since this is smaller than the product spec). At the end I cut some cardboard to increase the thickness of the monitor and solved both of the problems.
One other complaint is that the spanner tool included is terrible to use because of the design of the nuts and bolts. It really tests your patience.
Would I recommend this product? Read the specifications carefully and make sure you are willing to improvise. But save yourself the hassle and buy a monitor compatible with VESA mounts.
I can see where they were coming from with this monitor adapter kit, but it didn't work for our monitors (Viewsonic vx2453mh-led).
We could not offset the mounting plate and arms away from the IO ports, when mounted you couldn't plug your cables in or out.
If they had designed two of the arms to be 10cm longer we may have been able to jig it to work.
Instead we glued blocks of wood to the back and screwed our mounts to these.
I can see where they were coming from with this monitor adapter kit, but it didn't work for our monitors (Viewsonic vx2453mh-led).
We could not offset the mounting plate and arms away from the IO ports, when mounted you couldn't plug your cables in or out.
If they had designed two of the arms to be 10cm longer we may have been able to jig it to work.
Instead we glued blocks of wood to the back and screwed our mounts to these.
BRATECK Universal Montior Adapter Kit.
For monitors without VESA holes. Fits screens thinkness 25.5mm to 45.5mm. Mount to VESA mount 75x75 to 100x100mm.
Monitor Adapter Kit
The XMA-01 offers an innovative mounting solution for you to mount monitors without VESA compatibility to a monitor desk or wall mount. The adapter is designed to fit any VESA monitor mount with 75x75mm and 100x100mm mounting holes and includes all required screws and other hardware for assembly. The XMA-01 uses a four-arm system to adjust to the different external dimensions of flat-panel monitors and clamp them in place securely.
This adapter supports most 13"-27" monitors with a thickness of 25.5mm to 45.5mm. It allows your non-VESA monitor to be mounted on almost any ergonomic monitor arm and to be adjusted for improved viewing comfort.
"Excellent customer service. I would like to commend Jordan Cutler for a job well done. I had to..."
"Joshua Lim was amazing to me, great service, and very patient."
"I'm just so happy with PB Tech over the years. Bought this computer I'm typing on nearly 8..."
"Once again EXCELLENT friendly service from Saad . Was quick to respond and helped me resolve my..."
"Thank you to Saad Malik, replied and solved my problem very quick:)"
"Excellent tv mount, simple to install, ordering online was simple, delivery was quick,"
"Always such great products at the best prices around. Have never had any issues with anything I..."
"Great service provided. Quick responses to emails too. Well done."
"I bought pc parts from here half a year ago to build my pc from Alex Ng at Manukau. Few months..."
"Martin has helped me with multiple purchases. He's my go to if I need anything. His..."
The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1 working day for North Island deliveries and 2 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.
Need your order in a hurry? PB Tech offers same day delivery for the Auckland region. Simple place your order before 2pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.
PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com
PB Tech holds a significant amount of stock in our New Zealand based logistics centre and can ship stock from this location usually within 2-4 working days (see the timeframes mentioned on each product page for more accurate delivery estimates).
In most cases, items ordered from the NZ Logistics Centre are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
Unfortunately no pick-up options are available directly from this location, you can select a pick up from one of our branches however and we will transfer your order there so you can pick up.
Products marked as 'In stock with Supplier' are shipped from one of our suppliers / vendors. The time frame for shipments can vary so please refer to the shipping time frames mentioned on each product page for more accurate delivery estimates.
In most cases, items ordered from suppliers are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.
To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.
If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.
Please note, items purchased on finance cannot be exchanged for a gift card.
If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.
If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.
To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).
To return a product to PB Tech directly, please complete our request a return form.
Or view our returns policy for more information.