GIVE FEEDBACK

Raspberry Pi Add-On Board, Power over Ethernet (PoE) HAT for Raspberry Pi 4B and 3 Model B+ The Newest Version POE HAT

Raspberry Pi Add-On Board, Power over Ethernet (PoE) HAT for Raspberry Pi 4B and 3 Model B+ The Newest Version POE HAT
PB Tech price: PB Tech price:
$42 00  +GST $48 30  inc GST
  • Overview
  • Features
  • Specifications
  • Reviews
  • Q & A

Generating Print Page

Raspberry Pi Add-On Board, Power over Ethernet (PoE) HAT for Raspberry Pi 4B and 3 Model B+ The Newest Version POE HAT

Raspberry Pi Add-On Board, Power over Ethernet (PoE) HAT for Raspberry Pi 4B and 3 Model B+ The...

  • Brand: Raspberry Pi
  • MPN: 2945677
  • Part #: SEVRBP0184
  • UPC:652508442105
PB Tech price:PB Tech price:
$4200$4830
 +GST  inc GST

Store Pickup: Pick-up disabled due to COVID-19
Delivery: For essential businesses only
Register as an essential business

What PB Tech customers are saying about this product...See More Reviews

"Works perfectly fine with Pi4."

P
By: PatrickA2 30/09/19
Verified Owner

"More than the cost of the computer it powers, but worth it if you have PoE to reduce the number of wall warts and associated cabling."

S
By: Simon 24/07/19
Verified Owner

Features

The PoE HAT

The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+ (launched March 2018). The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet-enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

Supplied with this product

 - Raspberry Pi PoE HAT
 - Mechanical spacers

Other hardware needed

 - A Raspberry Pi 4 Model B or Pi 3 Model B+
 - An Ethernet cable
 - Power-sourcing equipment for a 802.3af Power over Ethernet network

Connecting your PoE HAT to the Raspberry Pi

 - Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board
 - Then connect the Raspberry Pi PoE HAT to the two 0.1" headers (40 + 4) that are fitted on the Raspberry Pi
 - Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector

Disconnecting your PoE HAT

 - Take care when separating the HAT from the Pi
 - Pull evenly so that it detaches from all the pins at the same rate; do not pull one end of the connector off before the other

Additional information

No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pi's software is up to date for all functionality to be available. The PoE HAT is fitted with a small fan that is controlled by the Raspberry Pi via I2C. The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi.

Specifications

The Raspberry Pi PoE HAT is an add-on board for the Raspberry Pi 3 Model B+. It allows the Raspberry Pi to be powered via a power-enabled Ethernet network.

 - 802.3af PoE
 - Fully isolated switched-mode power supply
 - 37-57V DC, Class 2 device
 - 5V/2.5A DC output
 - 25mm x 25mm brushless fan for processor cooling
 - Fan control

Manufacturer Part No: 2945677 Brand: Raspberry Pi Product Type: -
UPC 652508442105 Product Family: - Shipping Weight: 0.124 kg
PB Part No: SEVRBP0184 Product Model: -

Warranty: 12 months local warranty *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

4.5 out of 5 StarsBased on 3 Reviews

5 Stars
2
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0

Filter Results

Do you own this product?

Write a review and go into the draw to win great prizes each month! Learn more WRITE A REVIEW
Displaying 1 - 3 of 3 reviews

Works, but not great

Yes you can power your Pi4 off POE from a switch. Its kinda neat how this box can run fine with exactly one cable.

But the tiny 5V fan on board is pretty useless at cooling, and it blocks most CPU heatsinks from fitting.

So I've used the transparent case with a 40mm 5V fan on the top and that kinda-works but is twittery due to speed controls - might tweak them.

Personally a better solution would have been the Adafruit POE splitter, except that doesn't come wiht USB3 support, just microusb.

C
By: CraigF5 22/03/20
0 out of 0 users found this review helpful
Did you find it helpful?

Works as intended

Works perfectly fine with Pi4.

P
By: PatrickA2 30/09/19
Verified Owner
0 out of 0 users found this review helpful
Did you find it helpful?

Expensive but worth it

More than the cost of the computer it powers, but worth it if you have PoE to reduce the number of wall warts and associated cabling.

S
By: Simon 24/07/19
Verified Owner
0 out of 0 users found this review helpful
Did you find it helpful?

Customer Questions & Answers

Want to know something about this product? Ask a question which other users may be able to answer.

Raspberry Pi Add-On Board, Power over Ethernet (PoE) HAT for Raspberry Pi 4B and 3 Model B+ The Newest Version POE HAT

  • Brand: Raspberry Pi
  • MPN: 2945677
  • Part #: SEVRBP0184
  • UPC:652508442105
PB Tech price: $42.00 Excluding GSTPB Tech price:$48.30 Including GST
Date Created: 16:45, 29-03-2020
Product URL: https://www.pbtech.co.nz/product/SEVRBP0184/Raspberry-Pi-Add-On-Board-Power-over-Ethernet-PoE
Branch
New Stock
On Display
Albany
0
North Shore
0
Auckland CBD
0
Auckland Uni
0
Penrose
0
Henderson
0
Manukau
0
Hamilton
0
Tauranga
0
New Plymouth
0
Wellington
0
Christchurch
0
Head Office (Web)
20

Features

The PoE HAT

The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+ (launched March 2018). The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet-enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

Supplied with this product

 - Raspberry Pi PoE HAT
 - Mechanical spacers

Other hardware needed

 - A Raspberry Pi 4 Model B or Pi 3 Model B+
 - An Ethernet cable
 - Power-sourcing equipment for a 802.3af Power over Ethernet network

Connecting your PoE HAT to the Raspberry Pi

 - Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board
 - Then connect the Raspberry Pi PoE HAT to the two 0.1" headers (40 + 4) that are fitted on the Raspberry Pi
 - Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector

Disconnecting your PoE HAT

 - Take care when separating the HAT from the Pi
 - Pull evenly so that it detaches from all the pins at the same rate; do not pull one end of the connector off before the other

Additional information

No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pi's software is up to date for all functionality to be available. The PoE HAT is fitted with a small fan that is controlled by the Raspberry Pi via I2C. The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi.

Specifications

The Raspberry Pi PoE HAT is an add-on board for the Raspberry Pi 3 Model B+. It allows the Raspberry Pi to be powered via a power-enabled Ethernet network.

 - 802.3af PoE
 - Fully isolated switched-mode power supply
 - 37-57V DC, Class 2 device
 - 5V/2.5A DC output
 - 25mm x 25mm brushless fan for processor cooling
 - Fan control

Date Created: 16:45, 29-03-2020
Product URL: https://www.pbtech.co.nz/product/SEVRBP0184/Raspberry-Pi-Add-On-Board-Power-over-Ethernet-PoE
Your recently viewed items (1)
Home Computers & Tablets Single Board Computers Development & Expansion Boards Raspberry Pi Add-On Board, Power over Ethernet (PoE)...
Customer Testimonials - See More