Supermicro E300-8D Barebone Intel Xeon D-1518, 4 DIMM, 1x 2.5"...
Supermicro E200-8D Barebone, Intel Xeon D-1528, 4 DIMM, 1x 2.5"...
Supermicro 5018D-LN4T Embedded Barebone 1U Short Depth, Pentium...
Supermicro 5019C-M Barebone, 1U, LGA1151, 4x 3.5" Hot-Swap, 2x...
Supermicro 1019P-WTR Barebone, 1U, 1x LGA3647, 6 DIMM, 10x 2.5"...
- Network Security Appliance
- Edge Computing Server
- Virtualization Server
1. Intel® Atom® processor C3758,
Single socket FCBGA 1310;
8-Core, TDP 25W
2. 2x 3.5" or 4x 2.5" internal drive bays
3. 1 PCI-E 3.0 x4, 1 M.2 (M key for
SSD, 2242/2280, PCI-E 3.0 x2 or SATA3)
4. Up to 256GB ECC RDIMM DDR4
2400MHz or 64GB ECC/non-ECC
UDIMM in 4 DIMM slots
5. 4 1GbE LAN, 1 dedicated IPMI LAN
6. 2 USB 2.0, 1 VGA, 1 SuperDOM, TPM
7. 2x 40x28mm 4-pin PWM fans,
optional 1x 40x28mm 4-pin fan
8. 200W Low-noise AC-DC power supply
Product SKUs
SYS-5019A-FTN4
SuperServer 5019A-FTN4 (Black)
Motherboard
Super A2SDi-8C-HLN4F
Processor/Cache
CPU
Intel® Atom® processor C3758
FCBGA 1310 supported
CPU TDP support 25W
System Memory
Memory Capacity
4x DDR4 DIMM sockets
Supports up to 256GB DDR4 ECC RDIMM
Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type
2400/2133/1866/1600MHz ECC DDR4 SDRAM
DIMM Sizes
64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
Detects double-bit errors
(using ECC memory)
On-Board Devices
SATA
SoC controller for 4 SATA3 (6Gbps) ports
Network Controllers
Quad Gigabit Ethernet LAN via Intel® C3000 SoC
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1 Realtek RTL8201N PHY (dedicated IPMI)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
BMC integrated ASPEED AST2400
Input / Output
SATA
4 SATA3 (6Gbps) ports
LAN
4 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
2 USB 2.0 ports (rear)
Serial Port
1 COM port (header)
DOM
1 SATA DOM (Disk on Module) power connector
VGA
1 VGA Port
Others
TPM header
Chassis
Form Factor
1U Rackmount
Model
CSE-505-203B
Dimensions and Weight
Height
1.7" (43mm)
Width
17.2" (437mm)
Depth
9.8" (249mm)
Weight
Net Weight: 8 lbs (3.62 kg)
Gross Weight: 12 lbs (5.44 kg)
Available Colors
Black
Front Panel
Buttons
Power On/Off button
System Reset button
LEDs
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Information LED (temp., status)
Expansion Slots
PCI-E
1 PCI-E 3.0 x4 slot
1 M.2 PCI-E 3.0 x2, M Key 2242/2280
Drive Bays
HDD
2x 3.5" or 4x 2.5" internal hard drive bays (optional) *
System Cooling
Fans
2x 40x28mm 4-PIN PWM Fan, Optional 1x 40x28mm 4-PIN PWM Fan
Power Supply
200W
Low Noise AC-DC power supply with PFC
AC Voltage
100 - 240V, 50-60Hz, 2.6 Amp Max
+5V
8.0 Amp (max.)
+5V standby
2.0 Amp (max.)
+12V
16 Amp (max.)
-12V
0.5 Amp (max.)
+3.3V
8.0 Amp (max.)
Certification
Gold Level Certified
Gold Certified
System BIOS
BIOS Type
AMI UEFI BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
ACPI 5.0
USB Keyboard support
SMBIOS 2.7.1
UEFI
Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
0°C to 40°C (32°F to 104°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
| Manufacturer Part No: | SYS-5019A-FTN4 | Brand: | Supermicro | Product Type: | Embedded Barebone, |
| UPC | 672042286201 | Product Family: | - | Shipping Weight: | 5.75 kg |
| PB Part No: | SVRSPM11108 | Product Model: | 5019A-FTN4 | ||
| Warranty: | 36 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
||||
- Network Security Appliance
- Edge Computing Server
- Virtualization Server
1. Intel® Atom® processor C3758,
Single socket FCBGA 1310;
8-Core, TDP 25W
2. 2x 3.5" or 4x 2.5" internal drive bays
3. 1 PCI-E 3.0 x4, 1 M.2 (M key for
SSD, 2242/2280, PCI-E 3.0 x2 or SATA3)
4. Up to 256GB ECC RDIMM DDR4
2400MHz or 64GB ECC/non-ECC
UDIMM in 4 DIMM slots
5. 4 1GbE LAN, 1 dedicated IPMI LAN
6. 2 USB 2.0, 1 VGA, 1 SuperDOM, TPM
7. 2x 40x28mm 4-pin PWM fans,
optional 1x 40x28mm 4-pin fan
8. 200W Low-noise AC-DC power supply
Product SKUs
SYS-5019A-FTN4
SuperServer 5019A-FTN4 (Black)
Motherboard
Super A2SDi-8C-HLN4F
Processor/Cache
CPU
Intel® Atom® processor C3758
FCBGA 1310 supported
CPU TDP support 25W
System Memory
Memory Capacity
4x DDR4 DIMM sockets
Supports up to 256GB DDR4 ECC RDIMM
Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type
2400/2133/1866/1600MHz ECC DDR4 SDRAM
DIMM Sizes
64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
Detects double-bit errors
(using ECC memory)
On-Board Devices
SATA
SoC controller for 4 SATA3 (6Gbps) ports
Network Controllers
Quad Gigabit Ethernet LAN via Intel® C3000 SoC
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1 Realtek RTL8201N PHY (dedicated IPMI)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
BMC integrated ASPEED AST2400
Input / Output
SATA
4 SATA3 (6Gbps) ports
LAN
4 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
2 USB 2.0 ports (rear)
Serial Port
1 COM port (header)
DOM
1 SATA DOM (Disk on Module) power connector
VGA
1 VGA Port
Others
TPM header
Chassis
Form Factor
1U Rackmount
Model
CSE-505-203B
Dimensions and Weight
Height
1.7" (43mm)
Width
17.2" (437mm)
Depth
9.8" (249mm)
Weight
Net Weight: 8 lbs (3.62 kg)
Gross Weight: 12 lbs (5.44 kg)
Available Colors
Black
Front Panel
Buttons
Power On/Off button
System Reset button
LEDs
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Information LED (temp., status)
Expansion Slots
PCI-E
1 PCI-E 3.0 x4 slot
1 M.2 PCI-E 3.0 x2, M Key 2242/2280
Drive Bays
HDD
2x 3.5" or 4x 2.5" internal hard drive bays (optional) *
System Cooling
Fans
2x 40x28mm 4-PIN PWM Fan, Optional 1x 40x28mm 4-PIN PWM Fan
Power Supply
200W
Low Noise AC-DC power supply with PFC
AC Voltage
100 - 240V, 50-60Hz, 2.6 Amp Max
+5V
8.0 Amp (max.)
+5V standby
2.0 Amp (max.)
+12V
16 Amp (max.)
-12V
0.5 Amp (max.)
+3.3V
8.0 Amp (max.)
Certification
Gold Level Certified
Gold Certified
System BIOS
BIOS Type
AMI UEFI BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
ACPI 5.0
USB Keyboard support
SMBIOS 2.7.1
UEFI
Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
0°C to 40°C (32°F to 104°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1 working day for North Island deliveries and 2 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.
Need your order in a hurry? PB Tech offers same day delivery for the Auckland region. Simple place your order before 2pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled.
PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com
PB Tech holds a significant amount of stock in our New Zealand based logistics centre and can ship stock from this location usually within 2-4 working days (see the timeframes mentioned on each product page for more accurate delivery estimates).
In most cases, items ordered from the NZ Logistics Centre are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
Unfortunately no pick-up options are available directly from this location, you can select a pick up from one of our branches however and we will transfer your order there so you can pick up.
Products marked as 'In stock with Supplier' are shipped from one of our suppliers / vendors. The time frame for shipments can vary so please refer to the shipping time frames mentioned on each product page for more accurate delivery estimates.
In most cases, items ordered from suppliers are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.
To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.
If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.
Please note, items purchased on finance cannot be exchanged for a gift card.
If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.
If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.
To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).
To return a product to PB Tech directly, please complete our request a return form.
Or view our returns policy for more information.
What is a Wireless Mesh Network? 
