Pay only $421.65 and then three easy payments of $250.00 per fortnight*
Oxipay lets you spread the cost of your purchase over 4 fortnightly payments.
Click the button below or select Oxipay as your payment method during the checkout process.
If you do not have an Oxipay account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Oxipay
Six easy payments of $195.27 per week*
Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.
Click the button below or select Laybuy as your payment method during the checkout process.
If you do not have a Laybuy account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Laybuy
Finance from $10.45 per week*
Get what you want at a price you can afford. Choose a finance term below to see the weekly repayment amount and apply online during checkout or in-store.
Choose a Finance Term
*Repayments shown above are indicitive only and may vary. Ts and Cs and lending criteria apply.
Learn more about Finance Now
No payments or interest for 12 months available*
Q Card / Mastercard is your perfect shopping partner, combining the benefits of a credit card with the added ability to access a range of interest-free deals and payment holidays.
Learn more about Q Mastercard, apply online for one now, or email finance@pbtech.co.nz to chat with our finance team.
*Ts and Cs and lending criteria apply.
Learn more about Q Card
Supermicro E50-9AP Embedded Barebone, Atom E3940 4-Core 1.6GHz, 1...
Supermicro 1029P-WTRT Barebone, 1U, 2x LGA3647, 12 DIMM, 10x 2.5"...
Supermicro 5018D-FN8T Embedded Barebone 1U Short Depth, Xeon D...
Supermicro 5039A-I Barebone Workstation, LGA2066, 8 DIMM, 4x 3.5"...
Supermicro 5019S-MN4 Barebone, 1U, LGA1151, 4x 3.5" Hot-Swap, 4x...
- Intel C246 chipset
- 4 USB 3.1 (3 Type A, 1 Type C)
- 2 Hot-swap 2.5 SATA3 drive bays
- 2 DP, DVI-I, VGA, ALC 888S HD Audio
- 2 GbE LAN ports, 1 dedicated IPMI LAN
- 200W Low Noise AC-DC Power Supply with PFC, Gold Certified
- 1 PCI-E 3.0 x16 (HHHL) slot, M.2 (M key, 22110/80, PCI-E 3.0 x4/SATA)
- Up to 64GB unbuffered ECC/non-ECC UDIMM, up to DDR4-2666MHz, 4 DIMM slots
- Single socket H4 (LGA 1151) supports Intel Xeon E processor, 8th Gen. Intel Core i3 Processors, Intel Celeron, Intel Pentium
Main Specifications
Built-in Devices
Super X11SCZ-F
Device Type
SuperServer
Dimensions (HxWxD)
Height 1.7" (43mm) x Width 17.2" (437mm) x Depth 11.3" (287mm)
Enclosure Color
Black
Form Factor
1U Rackmount - CSE-510FT-203B
Weight
Gross Weight: 14.1 lbs (6.4 kg)
Net Weight: 10.0 lbs (4.54 kg)
Processor
Compatible Processors
Support Intel Xeon E processors, 8th Gen. Intel Core i3 Processors, Intel Celeron, Intel Pentium
A graphic integrated CPU is required to have onboard video from the DVI and DP ports
CPU TDP support up to 80W
Compatible Socket
Single Socket H4 (LGA 1151)
System Memory
DIMM Sizes
64GB, 32GB, 16GB, 8GB, 4GB
Memory Capacity
4 DIMM slots
Up to 64GB Unbuffered ECC/non-ECC UDIMM
Up to DDR4-2666MHz
Memory Type
2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Audio
ALC 888S 7.1 HD Audio
Chipset
Intel C246 chipset
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC
Network Controllers
Single LAN with Intel I210-AT
Single LAN with Intel PHY I219LM
SATA
SATA3 (6Gbps) via Intel C246 controller
RAID 0, 1 support
VGA
ASPEED AST2500 BMC and Intel HD Graphics
Input / Output
Audio
MIC-in and LINE-out
LAN
2 x RJ45 Gigabit Ethernet LAN ports
1 x RJ45 Dedicated IPMI LAN port
Others
TPM Header " Chip
SATA
2 SATA3 (6Gbps) ports, RAID 0, 1
USB
3 USB 3.1 ports (3 Type A and 1 Type C)
Video
2 DP (DisplayPort): 1 DVI-I, 1 VGA D-Sub Connector port
3 independent displays
Front Panel
Buttons
Power On/Off button, System Reset button
LEDs
Power LED, Hard drive activity LED, 2 Network activity LEDs, System Overheat LED
Expansion / Connectivity
M.2
M.2 Interface: 1 SATA/PCI-E 3.0 x4
M.2 Form Factor: 2280/22110
M.2 Key: M-Key
Expansion Slots
Total (Free) 1 PCI-E 3.0 x16 (HHHL) slot
Drive Bays
Internal:
2 Hot-swap 2.5" SATA3 drive bays
System Cooling
Fans
4x 40x28mm 4-pin PWM fans
Power Supply
Certification
80PLUS Gold Certified
Power Supply
200W Low Noise AC-DC power supply with PFC
System BIOS
BIOS Type
AMI UEFI
Management
Software
IPMI 2.0 with KVM support, Watch Dog, SuperDoctor 5
PC Health Monitoring
CPU
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN
Total of 6 fan headers supporting up to 6 fans
6 fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
Environmental Specifications
Operating Temperature
10°C to 40°C (50°F to 104°F)
Non-operating Temperature
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity
8% to 90% (non-condensing)
Non-operating Relative Humidity
5% to 95% (non-condensing)
Operating Environment / Compliance
RoHS
RoHS Compliant
Parts List
Items Included
Air Shroud 1x MCP-310-41001-0N
Fan 1x FAN-0065L4
Heatsink / Retention 1x SNK-P0046P
Motherboard / Chassis 1x MBD-X11SCZ-F / 1x CSE-510FT-203B
Parts 1x MCP-260-00128-0B, 1x MCP-150-00015-0B
Rear Window 2x MCP-240-00091-0N
Riser Card 1x RSC-RR1U-E16
| Manufacturer Part No: | SYS-1019C-HTN2 | Brand: | Supermicro | Product Type: | Barebone, |
| UPC | 672042345069 | Product Family: | - | Shipping Weight: | 6.69 kg |
| PB Part No: | SVRSPM31033 | Product Model: | 1019C-HTN2 | ||
| Warranty: | 36 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
||||
- Intel C246 chipset
- 4 USB 3.1 (3 Type A, 1 Type C)
- 2 Hot-swap 2.5 SATA3 drive bays
- 2 DP, DVI-I, VGA, ALC 888S HD Audio
- 2 GbE LAN ports, 1 dedicated IPMI LAN
- 200W Low Noise AC-DC Power Supply with PFC, Gold Certified
- 1 PCI-E 3.0 x16 (HHHL) slot, M.2 (M key, 22110/80, PCI-E 3.0 x4/SATA)
- Up to 64GB unbuffered ECC/non-ECC UDIMM, up to DDR4-2666MHz, 4 DIMM slots
- Single socket H4 (LGA 1151) supports Intel Xeon E processor, 8th Gen. Intel Core i3 Processors, Intel Celeron, Intel Pentium
Main Specifications
Built-in Devices
Super X11SCZ-F
Device Type
SuperServer
Dimensions (HxWxD)
Height 1.7" (43mm) x Width 17.2" (437mm) x Depth 11.3" (287mm)
Enclosure Color
Black
Form Factor
1U Rackmount - CSE-510FT-203B
Weight
Gross Weight: 14.1 lbs (6.4 kg)
Net Weight: 10.0 lbs (4.54 kg)
Processor
Compatible Processors
Support Intel Xeon E processors, 8th Gen. Intel Core i3 Processors, Intel Celeron, Intel Pentium
A graphic integrated CPU is required to have onboard video from the DVI and DP ports
CPU TDP support up to 80W
Compatible Socket
Single Socket H4 (LGA 1151)
System Memory
DIMM Sizes
64GB, 32GB, 16GB, 8GB, 4GB
Memory Capacity
4 DIMM slots
Up to 64GB Unbuffered ECC/non-ECC UDIMM
Up to DDR4-2666MHz
Memory Type
2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Audio
ALC 888S 7.1 HD Audio
Chipset
Intel C246 chipset
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC
Network Controllers
Single LAN with Intel I210-AT
Single LAN with Intel PHY I219LM
SATA
SATA3 (6Gbps) via Intel C246 controller
RAID 0, 1 support
VGA
ASPEED AST2500 BMC and Intel HD Graphics
Input / Output
Audio
MIC-in and LINE-out
LAN
2 x RJ45 Gigabit Ethernet LAN ports
1 x RJ45 Dedicated IPMI LAN port
Others
TPM Header " Chip
SATA
2 SATA3 (6Gbps) ports, RAID 0, 1
USB
3 USB 3.1 ports (3 Type A and 1 Type C)
Video
2 DP (DisplayPort): 1 DVI-I, 1 VGA D-Sub Connector port
3 independent displays
Front Panel
Buttons
Power On/Off button, System Reset button
LEDs
Power LED, Hard drive activity LED, 2 Network activity LEDs, System Overheat LED
Expansion / Connectivity
M.2
M.2 Interface: 1 SATA/PCI-E 3.0 x4
M.2 Form Factor: 2280/22110
M.2 Key: M-Key
Expansion Slots
Total (Free) 1 PCI-E 3.0 x16 (HHHL) slot
Drive Bays
Internal:
2 Hot-swap 2.5" SATA3 drive bays
System Cooling
Fans
4x 40x28mm 4-pin PWM fans
Power Supply
Certification
80PLUS Gold Certified
Power Supply
200W Low Noise AC-DC power supply with PFC
System BIOS
BIOS Type
AMI UEFI
Management
Software
IPMI 2.0 with KVM support, Watch Dog, SuperDoctor 5
PC Health Monitoring
CPU
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN
Total of 6 fan headers supporting up to 6 fans
6 fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
Environmental Specifications
Operating Temperature
10°C to 40°C (50°F to 104°F)
Non-operating Temperature
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity
8% to 90% (non-condensing)
Non-operating Relative Humidity
5% to 95% (non-condensing)
Operating Environment / Compliance
RoHS
RoHS Compliant
Parts List
Items Included
Air Shroud 1x MCP-310-41001-0N
Fan 1x FAN-0065L4
Heatsink / Retention 1x SNK-P0046P
Motherboard / Chassis 1x MBD-X11SCZ-F / 1x CSE-510FT-203B
Parts 1x MCP-260-00128-0B, 1x MCP-150-00015-0B
Rear Window 2x MCP-240-00091-0N
Riser Card 1x RSC-RR1U-E16
The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1 working day for North Island deliveries and 2 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.
Need your order in a hurry? PB Tech offers same day delivery for the Auckland region. Simple place your order before 2pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
You can pick-up your online order from any of our branches nationwide. You can select which branch you want to pick up from the checkout. Please note that if the branch you want to pick up from doesn't have stock of one or more of the items in your order, it may take 3-4 working days to transfer the stock to the branch so your order can be fulfilled.
PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com
PB Tech holds a significant amount of stock in our New Zealand based logistics centre and can ship stock from this location usually within 2-4 working days (see the timeframes mentioned on each product page for more accurate delivery estimates).
In most cases, items ordered from the NZ Logistics Centre are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
Unfortunately no pick-up options are available directly from this location, you can select a pick up from one of our branches however and we will transfer your order there so you can pick up.
Products marked as 'In stock with Supplier' are shipped from one of our suppliers / vendors. The time frame for shipments can vary so please refer to the shipping time frames mentioned on each product page for more accurate delivery estimates.
In most cases, items ordered from suppliers are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.
To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.
If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.
Please note, items purchased on finance cannot be exchanged for a gift card.
If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.
If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.
To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).
To return a product to PB Tech directly, please complete our request a return form.
Or view our returns policy for more information.
Tech Expo - Auckland 2020 - Powered by PB Tech! 
.jpg){kind=avatar}
