Departments
Overview
The DGS-1100-05PD is a unique 5-port switch powered through the network cable by an upstream PoE power source (PoE switch or injector). As a "PoE extender", it also has the ability to propagate (pass-through) PoE power further downstream to one or two Powered Devices (PDs).
Powered by PoE
The DGS-1100-05PD is powered by a PoE switch or PoE injector that can be located up to 100m away. As such, this device is intended for applications where a small 5-port Gigabit switch is required but AC power is not close by. The upstream PoE source may support either 802.3af or 802.3at. One switch port is used for the power input (port 5) and the other four ports are available as standard 10/100/1000 ports for networked devices, such as PCs, printers, etc.
PoE Extender
The DGS-1100-05PD switch can also "pass-through" PoE power to one or two downstream PDs (such as IP Cameras, IP Phones, Wireless APs). The PoE budget for this feature is dependent on the PoE source (802.3af or 802.3at) and the PD's PoE Classification.
PoE pass-through capability makes the DGS-1100-05PD ideal for IP Surveillance networks when cameras are located beyond 100m from the main PoE switch. As an additional benefit, because the switch is smart-managed, an administrator can control various PoE functions through the user interface, such as remotely rebooting cameras or access points, from anywhere on the network.
The following table illustrates the switch's capabilities when using PoE pass-through:
Built to Last
The DGS-1100-05PD comes in a compact metal enclosure. It can be wall mounted or placed on a desktop. It has no fans so it operates silently. Compliant with IEEE 802.3az Energy Efficient Ethernet (EEE), it consumes less energy by cutting down on power consumption when port utilization is low.
Easy to Deploy
The DGS-1100-05PD supports an intuitive client-based utility (D-Link Network Assistant Utility) and a web-based management interface. The client-based utility discovers all D-Link Smart Switches within the same Layer 2 network segment, making initial setup quick and easy. This allows extensive switch configuration and basic administration of discovered devices, including password changes and firmware upgrades. The web-based management interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switch to be controlled from any network-connected PC.
Surveillance VLAN and Bandwidth Control
The DGS-1100-05PD supports Surveillance VLAN for IP surveillance deployments. This gives video traffic a dedicated VLAN and higher priority through the switch, separating surveillance traffic from the rest of the network. This also helps to ensure the quality of the video traffic, sparing businesses the added cost of dedicated surveillance networking hardware. Bandwidth Control can reserve bandwidth on a per port basis for important functions that require larger bandwidth or might have high priority.
Advanced Features
The DGS-1100-05PD is equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to create a MAC white list for specific ports, helping administrators limit network access to authorized devices only. Storm Control monitors broadcast, multicast, or unknown unicast traffic and will start blocking or discarding packets which could flood the network when the defined threshold is exceeded. IGMP Snooping is able to reduce the loading of L3 multicast routers and save bandwidth in network throughput.
Easy Troubleshooting
The DGS-1100-05PD features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection is used to detect loops created by a specific port and automatically shuts down the affected port. Cable Diagnostics helps network administrators quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.
General
Hardware Version
Rev. B
10/100/1000 Ports
5
Port Standards & Functions
IEEE 802.3, 802.3u, 802.3ab compliant
IEEE 802.3x Flow Control
IEEE 802.3az EEE compliant
IEEE 802.3af compliant (DGS-1100-05PD)
IEEE 802.3af/at compliant (DGS-1100-08P)
Half/Full-duplex operation at 10/100
Full-duplex operation at 1000Mbps
Auto-Negotiation for each port
Auto MDI/MDIX
Switching Capacity
10 Gbps
Max. Forwarding Rate
7.4 Mpps
MAC Address Table Size
2K Entries
Packet Buffer
1 Mbits
Flash Memory
2 Mbytes
Power over Ethernet
PoE Standard
802.3af
PoE Capable Ports
Ports 1-2 (PSE)
Port 5 (PD)
PoE Power Budget
18W with 802.3at input power
8W with 802.3af input power
Physical & Environmental
Power Input
802.3af/at PoE input only (no external Pwr Supply)
Max. Power Consumption
23.92 W (PoE on)
2.32 W (PoE off)
Standby Power Consumption
1.46 W
Ventilation
Fanless
Acoustics
0 dB(A)
Heat Dissipation
N/A
Operating Temperature
32°F to 104°F (0°C to 40°C)
Storage Temperature
-40°F to 158°F (-40°C to 70°C)
Operating Humidity
0% to 90% non-condensing
Storage Humidity
0% to 95% non-condensing
Dimensions (W x D x H)
5.91" x 3.82" x 1.10" (150 x 97 x 28 mm)
Weight
0.84 lbs (0.38 kg)
EMI Certifications
FCC Class B, CE Class B, VCCI Class B, BSMI, CCC
Safety
cUL, CE LVD, CB, BSMI, CCC
MTBF
2,346,941 hours
Software Features
VLAN
Port-based VLAN
802.1Q Tagged VLAN
Surveillance VLAN
Voice VLAN
Management VLAN
Asymmetric VLAN
VLAN Group
Supports 32 static VLAN groups
Max. 4094 VIDs
L2 Features
Flow Control
802.3x Flow Control
HOL Blocking Prevention
Jumbo Frames up to 9216 Bytes
IGMP Snooping
IGMPv1/v2 Snooping
IGMPv3 Awareness
Supports 128 Groups
802.3ad Link Aggregation
1 group, 2-4 ports per group
Loopback Detection
Cable Diagnostics
Port Mirroring
One-to-One
Many-to-One
Statistics
Tx Ok
Tx Error
Rx Ok
Rx Error
Spanning Tree Protocol
802.1D STP
802.1w RSTP
QoS
802.1p Quality of Service
4 queues per port
Queue Handling
Strict
Weighted Round Robin (WRR)
Bandwidth Control
Port Based
Ingress: minimum granularity 8 Kbps
Egress: minimum granularity 8 Kbps
Security
Traffic Segmentation
Broadcast/Multicast/Unknown Unicast Storm Control
Static MAC Address
Max. 32 entries
Management
Web-Based GUI:
Supports IPv4
D-Link Network Assistant Utility
Green Technology
Compliant with Energy Efficient Ethernet (IEEE 802.3az)
RoHS Compliant
MIB/RFC Standards
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
IEEE 802.1p
RFC2236, IGMP Snooping
RFC1213 MIB II
RFC1215 MIB Traps Convention
Ordering Information
DGS-1100-05PD
5-Port Gigabit Smart Managed Desktop Switch, PoE Powered, PoE Pass-through
Manufacturer Part No: | DGS-1100-05PD | Brand: | D-Link | Product Type: | - |
UPC | 790069428784 | Product Family: | - | Shipping Weight: | 0.637 kg |
PB Part No: | SWHDLK60502018 | Product Model: | DGS-1100-05PD | ||
Warranty: | 36 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
Overview
The DGS-1100-05PD is a unique 5-port switch powered through the network cable by an upstream PoE power source (PoE switch or injector). As a "PoE extender", it also has the ability to propagate (pass-through) PoE power further downstream to one or two Powered Devices (PDs).
Powered by PoE
The DGS-1100-05PD is powered by a PoE switch or PoE injector that can be located up to 100m away. As such, this device is intended for applications where a small 5-port Gigabit switch is required but AC power is not close by. The upstream PoE source may support either 802.3af or 802.3at. One switch port is used for the power input (port 5) and the other four ports are available as standard 10/100/1000 ports for networked devices, such as PCs, printers, etc.
PoE Extender
The DGS-1100-05PD switch can also "pass-through" PoE power to one or two downstream PDs (such as IP Cameras, IP Phones, Wireless APs). The PoE budget for this feature is dependent on the PoE source (802.3af or 802.3at) and the PD's PoE Classification.
PoE pass-through capability makes the DGS-1100-05PD ideal for IP Surveillance networks when cameras are located beyond 100m from the main PoE switch. As an additional benefit, because the switch is smart-managed, an administrator can control various PoE functions through the user interface, such as remotely rebooting cameras or access points, from anywhere on the network.
The following table illustrates the switch's capabilities when using PoE pass-through:
Built to Last
The DGS-1100-05PD comes in a compact metal enclosure. It can be wall mounted or placed on a desktop. It has no fans so it operates silently. Compliant with IEEE 802.3az Energy Efficient Ethernet (EEE), it consumes less energy by cutting down on power consumption when port utilization is low.
Easy to Deploy
The DGS-1100-05PD supports an intuitive client-based utility (D-Link Network Assistant Utility) and a web-based management interface. The client-based utility discovers all D-Link Smart Switches within the same Layer 2 network segment, making initial setup quick and easy. This allows extensive switch configuration and basic administration of discovered devices, including password changes and firmware upgrades. The web-based management interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switch to be controlled from any network-connected PC.
Surveillance VLAN and Bandwidth Control
The DGS-1100-05PD supports Surveillance VLAN for IP surveillance deployments. This gives video traffic a dedicated VLAN and higher priority through the switch, separating surveillance traffic from the rest of the network. This also helps to ensure the quality of the video traffic, sparing businesses the added cost of dedicated surveillance networking hardware. Bandwidth Control can reserve bandwidth on a per port basis for important functions that require larger bandwidth or might have high priority.
Advanced Features
The DGS-1100-05PD is equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to create a MAC white list for specific ports, helping administrators limit network access to authorized devices only. Storm Control monitors broadcast, multicast, or unknown unicast traffic and will start blocking or discarding packets which could flood the network when the defined threshold is exceeded. IGMP Snooping is able to reduce the loading of L3 multicast routers and save bandwidth in network throughput.
Easy Troubleshooting
The DGS-1100-05PD features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection is used to detect loops created by a specific port and automatically shuts down the affected port. Cable Diagnostics helps network administrators quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.
General
Hardware Version
Rev. B
10/100/1000 Ports
5
Port Standards & Functions
IEEE 802.3, 802.3u, 802.3ab compliant
IEEE 802.3x Flow Control
IEEE 802.3az EEE compliant
IEEE 802.3af compliant (DGS-1100-05PD)
IEEE 802.3af/at compliant (DGS-1100-08P)
Half/Full-duplex operation at 10/100
Full-duplex operation at 1000Mbps
Auto-Negotiation for each port
Auto MDI/MDIX
Switching Capacity
10 Gbps
Max. Forwarding Rate
7.4 Mpps
MAC Address Table Size
2K Entries
Packet Buffer
1 Mbits
Flash Memory
2 Mbytes
Power over Ethernet
PoE Standard
802.3af
PoE Capable Ports
Ports 1-2 (PSE)
Port 5 (PD)
PoE Power Budget
18W with 802.3at input power
8W with 802.3af input power
Physical & Environmental
Power Input
802.3af/at PoE input only (no external Pwr Supply)
Max. Power Consumption
23.92 W (PoE on)
2.32 W (PoE off)
Standby Power Consumption
1.46 W
Ventilation
Fanless
Acoustics
0 dB(A)
Heat Dissipation
N/A
Operating Temperature
32°F to 104°F (0°C to 40°C)
Storage Temperature
-40°F to 158°F (-40°C to 70°C)
Operating Humidity
0% to 90% non-condensing
Storage Humidity
0% to 95% non-condensing
Dimensions (W x D x H)
5.91" x 3.82" x 1.10" (150 x 97 x 28 mm)
Weight
0.84 lbs (0.38 kg)
EMI Certifications
FCC Class B, CE Class B, VCCI Class B, BSMI, CCC
Safety
cUL, CE LVD, CB, BSMI, CCC
MTBF
2,346,941 hours
Software Features
VLAN
Port-based VLAN
802.1Q Tagged VLAN
Surveillance VLAN
Voice VLAN
Management VLAN
Asymmetric VLAN
VLAN Group
Supports 32 static VLAN groups
Max. 4094 VIDs
L2 Features
Flow Control
802.3x Flow Control
HOL Blocking Prevention
Jumbo Frames up to 9216 Bytes
IGMP Snooping
IGMPv1/v2 Snooping
IGMPv3 Awareness
Supports 128 Groups
802.3ad Link Aggregation
1 group, 2-4 ports per group
Loopback Detection
Cable Diagnostics
Port Mirroring
One-to-One
Many-to-One
Statistics
Tx Ok
Tx Error
Rx Ok
Rx Error
Spanning Tree Protocol
802.1D STP
802.1w RSTP
QoS
802.1p Quality of Service
4 queues per port
Queue Handling
Strict
Weighted Round Robin (WRR)
Bandwidth Control
Port Based
Ingress: minimum granularity 8 Kbps
Egress: minimum granularity 8 Kbps
Security
Traffic Segmentation
Broadcast/Multicast/Unknown Unicast Storm Control
Static MAC Address
Max. 32 entries
Management
Web-Based GUI:
Supports IPv4
D-Link Network Assistant Utility
Green Technology
Compliant with Energy Efficient Ethernet (IEEE 802.3az)
RoHS Compliant
MIB/RFC Standards
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
IEEE 802.1p
RFC2236, IGMP Snooping
RFC1213 MIB II
RFC1215 MIB Traps Convention
Ordering Information
DGS-1100-05PD
5-Port Gigabit Smart Managed Desktop Switch, PoE Powered, PoE Pass-through
"Thank you to Saad Malik, replied and solved my problem very quick:)"
"Excellent tv mount, simple to install, ordering online was simple, delivery was quick,"
"Always such great products at the best prices around. Have never had any issues with anything I..."
"Great service provided. Quick responses to emails too. Well done."
"I bought pc parts from here half a year ago to build my pc from Alex Ng at Manukau. Few months..."
"Martin has helped me with multiple purchases. He's my go to if I need anything. His..."
"Appreciate Saad Malik's quick response on my on-line order issues. Thank You, Sir."
"Pre ordered a Samsung Galaxy S21 Ultra. Arrived 2 days earlier than advertised. ..."
"A huge shoutout to a staff named PueiDoo, a real Legend! She got me certain items which would..."
The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1 working day for North Island deliveries and 2 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.
Need your order in a hurry? PB Tech offers same day delivery for the Auckland region. Simple place your order before 2pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.
PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com
PB Tech holds a significant amount of stock in our New Zealand based logistics centre and can ship stock from this location usually within 2-4 working days (see the timeframes mentioned on each product page for more accurate delivery estimates).
In most cases, items ordered from the NZ Logistics Centre are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
Unfortunately no pick-up options are available directly from this location, you can select a pick up from one of our branches however and we will transfer your order there so you can pick up.
Products marked as 'In stock with Supplier' are shipped from one of our suppliers / vendors. The time frame for shipments can vary so please refer to the shipping time frames mentioned on each product page for more accurate delivery estimates.
In most cases, items ordered from suppliers are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.
To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.
If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.
Please note, items purchased on finance cannot be exchanged for a gift card.
If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.
If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.
To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).
To return a product to PB Tech directly, please complete our request a return form.
Or view our returns policy for more information.