Departments
Five easy payments of $12.07 per fortnight*
humm lets you spread the cost of your purchase over 5 or 10 interest free payments.
Click the button below or select humm as your payment method during the checkout process.
If you do not have a humm account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about humm
Six easy payments of $10.06 per week*
Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.
Click the button below or select Laybuy as your payment method during the checkout process.
If you do not have a Laybuy account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Laybuy
Warning: The headlamp is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the lamp directly into anyone's eyes.
Note: Low mode is activated by default when the lamp is turned on.
The HM23 is a multi-purpose AA battery powered headlamp that can shine a maximum 240 lumens a distance of 174 feet. Made from high-strength aluminum and silicone, this tough little headlamp weighs only 1.5 ounces and is waterproof and dustproof. Convenient side switch quickly controls three brightness levels of soft neutral white light. And the extremely comfortable, stay put, reflective headband plus 180 degree adjustable beam make this headlamp perfect for all kinds of activities-running, hiking, camping and climbing.
- Cree neutral white LED with a lifespan of 50,000 hours.
- Powered by one AA (alkaline/ Ni-MH) battery (included).
- Max 240 lumens and max 100 hours runtime.
- Three output levels for all kinds of lighting demands.
- Digitally regulated output maintains sectional constant brightness.
- Reverse polarity protection to protect improper battery insertion.
- One-switch control ensures easy and fast operation.
- Low-voltage warning reminds when battery replacement needed.
- Made of quality aluminum and silicone - tough and durable.
On/off: Press and hold the switch for 0.5 seconds to turn on/off the light.
Output Selection: With the lamp switched on, single click the switch to cycle through Low Med High.
Battery Replacement: Unscrew the battery cap to insert the battery in accordance with the polarity marks, then screw the battery cap back on.
Low Voltage Warning: With the lamp switched on, if the voltage level drops below the preset level, the lamp is programmed to downshift to a lower brightness level until low output is reached. When this happens in low output, the lamp blinks to remind you to replace the battery. To ensure normal use, the lamp will not turn off automatically and will work until the battery level runs out.
Notice: The headband is factory assembled by default.
Step 1: Attach the headband to the headlamp as shown.
Step 2: Adjust the headband by sliding the buckle to required length.
- Disassembling the sealed head can cause damage to the lamp and will void the warranty.
- Loosen the battery cover or take out the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
- Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: The battery needs replacing.
Solution: Replace battery (Ensure battery is inserted according to the manufacturer's specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
LED:
CREE XP-G3 S3 Neutral White
Power Source:
1 x AA (included)
Peak Beam Distance:
53 meters (173.88 ft.)
Peak Beam Intensity:
830cd
IPX Rating:
IP68 (submersible up to 2 meters)
Impact Resistance:
2 meters (6.56 ft.)
Brightness/Runtime/Throw Distance:
High: 240 lumens (830cd) - 8 hours - 53 meters
Medium: 70 lumens (280cd) - 16 hours - 30 meters
Low: 4 lumens (22cd) - 100 hours - 9.5 meters
Dimensions
Length: 2.74" (69.5mm)
Height: 1.57" (40mm)
Width: 1.26" (32mm)
Weight: 1.52oz. (43g) excluding battery
Manufacturer Part No: | FNX-HM23 | Brand: | Fenix | Product Type: | Running Headlamp |
UPC | - | Product Family: | Camping & Hiking | Shipping Weight: | 0.15 kg |
PB Part No: | TOLFNX0006 | Product Model: | HM23 | ||
Warranty: | 12 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
Warning: The headlamp is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the lamp directly into anyone's eyes.
Note: Low mode is activated by default when the lamp is turned on.
The HM23 is a multi-purpose AA battery powered headlamp that can shine a maximum 240 lumens a distance of 174 feet. Made from high-strength aluminum and silicone, this tough little headlamp weighs only 1.5 ounces and is waterproof and dustproof. Convenient side switch quickly controls three brightness levels of soft neutral white light. And the extremely comfortable, stay put, reflective headband plus 180 degree adjustable beam make this headlamp perfect for all kinds of activities-running, hiking, camping and climbing.
- Cree neutral white LED with a lifespan of 50,000 hours.
- Powered by one AA (alkaline/ Ni-MH) battery (included).
- Max 240 lumens and max 100 hours runtime.
- Three output levels for all kinds of lighting demands.
- Digitally regulated output maintains sectional constant brightness.
- Reverse polarity protection to protect improper battery insertion.
- One-switch control ensures easy and fast operation.
- Low-voltage warning reminds when battery replacement needed.
- Made of quality aluminum and silicone - tough and durable.
On/off: Press and hold the switch for 0.5 seconds to turn on/off the light.
Output Selection: With the lamp switched on, single click the switch to cycle through Low Med High.
Battery Replacement: Unscrew the battery cap to insert the battery in accordance with the polarity marks, then screw the battery cap back on.
Low Voltage Warning: With the lamp switched on, if the voltage level drops below the preset level, the lamp is programmed to downshift to a lower brightness level until low output is reached. When this happens in low output, the lamp blinks to remind you to replace the battery. To ensure normal use, the lamp will not turn off automatically and will work until the battery level runs out.
Notice: The headband is factory assembled by default.
Step 1: Attach the headband to the headlamp as shown.
Step 2: Adjust the headband by sliding the buckle to required length.
- Disassembling the sealed head can cause damage to the lamp and will void the warranty.
- Loosen the battery cover or take out the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
- Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: The battery needs replacing.
Solution: Replace battery (Ensure battery is inserted according to the manufacturer's specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
LED:
CREE XP-G3 S3 Neutral White
Power Source:
1 x AA (included)
Peak Beam Distance:
53 meters (173.88 ft.)
Peak Beam Intensity:
830cd
IPX Rating:
IP68 (submersible up to 2 meters)
Impact Resistance:
2 meters (6.56 ft.)
Brightness/Runtime/Throw Distance:
High: 240 lumens (830cd) - 8 hours - 53 meters
Medium: 70 lumens (280cd) - 16 hours - 30 meters
Low: 4 lumens (22cd) - 100 hours - 9.5 meters
Dimensions
Length: 2.74" (69.5mm)
Height: 1.57" (40mm)
Width: 1.26" (32mm)
Weight: 1.52oz. (43g) excluding battery
"Excellent service and good price."
"PB Tech staff are professional and very helpful."
"Saad Malik provided exceptional customer service Would recommend"
"Ordered at 3pm and it was on my desk when i walked in at 9am the next day. Can't get much..."
"Fantastic support from Saad to re-arrange an order so we could pick it up locally. Fast and..."
"Good service, I had an issue with a purchase and they fix it right away, thumbs up. Thanks."
"After dropping and breaking my old phone. I placed an order for a new phone and case through PB..."
The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1 working day for North Island deliveries and 2 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.
Need your order in a hurry? PB Tech offers same day delivery for the Auckland region. Simple place your order before 2pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.
PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com
PB Tech holds a significant amount of stock in our New Zealand based logistics centre and can ship stock from this location usually within 2-4 working days (see the timeframes mentioned on each product page for more accurate delivery estimates).
In most cases, items ordered from the NZ Logistics Centre are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
Unfortunately no pick-up options are available directly from this location, you can select a pick up from one of our branches however and we will transfer your order there so you can pick up.
Products marked as 'In stock with Supplier' are shipped from one of our suppliers / vendors. The time frame for shipments can vary so please refer to the shipping time frames mentioned on each product page for more accurate delivery estimates.
In most cases, items ordered from suppliers are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.
To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.
If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.
Please note, items purchased on finance cannot be exchanged for a gift card.
If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.
If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.
To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).
To return a product to PB Tech directly, please complete our request a return form.
Or view our returns policy for more information.