Departments
Five easy payments of $8.81 per fortnight*
humm lets you spread the cost of your purchase over 5 or 10 interest free payments.
Click the button below or select humm as your payment method during the checkout process.
If you do not have a humm account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about humm
Six easy payments of $7.34 per week*
Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.
Click the button below or select Laybuy as your payment method during the checkout process.
If you do not have a Laybuy account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Laybuy
Warning:
- This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone's eyes.
- All information provided in this manual is subject to change without prior notice.
The Fenix E12 V2.0 AA Flashlight emits an impressive maximum 160 lumens from an included single AA battery. Using an ultra-thin optical lens, this flashlight delivers a soft and balanced beam a max distance of 223ft (68m). Access three brightness levels with a tap of the tail switch. At only 3" long, this flashlight is a great everyday carry size, and with its two-position body clip, you can carry it as you want-even clip it to your hat and use it as a headlamp. This little flashlight is built tough with an IP68 dustproof and waterproof rating. It's hard to beat the ease of powering your flashlight with one single AA battery. Super small and bright, the Fenix E12 V2.0 is a great upgrade for those looking for a AA powered EDC flashlight.
- MATCH CA18 cool white LED with a lifespan of 50,000 hours.
- Included single AA battery, easy to find (Ni-MH/Alkaline).
- Automobile ultra-thin optical lens coating process.
- No standby current, safe and cost-efficient.
- One-handed operation with the single tail switch.
- Two-position body clip and tail standing capability for varying conditions.
- Made of durable A6061-T6 aluminum.
- Premium type HAIII hard-anodized anti-abrasive finish.
On/off for the E12 V2.0 AA Flashlight: Fully press the tail switch to turn on/off the light.
Output Selection: With the light switched on, tap the tail switch to cycle through Low, Med, High.
Intelligent Memory Circuit: The light does not memorize the previously used output level, each time it is turned on, Low mode will be activated.
Battery Replacement: Unscrew the light tail and insert the battery with the anode side (+) towards the light head, then screw the light tailback on.
Low-voltage Warning: When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. To ensure normal use, the flashlight will not turn off automatically and will work till the battery runs out completely.
- Disassembling the sealed head can cause damage to the light and will void the warranty.
- Fenix recommends using an excellent quality battery.
- If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
- Unscrew the tail cap half a turn or take out the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
- Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: The battery needs replacing.
Solution: Replace battery (Ensure batteryis inserted according to the manufacturer's specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
Output Lumens
Low: 5
Medium: 30
High: 160
Runtime
Low: 70H
Medium: 13H
High: 1H
Distance
Low: 39ft
Medium: 92ft
High: 223ft
Intencity
Low: 31cd
Medium: 185cd
High: 1133cd
Waterproof
IP68 Up tp 2M
Size:
Length: 3.06" (76.6mm)
Body: 0.69" (17.6mm)
Head: 0.75" (19mm)
Battery
One Included AA Battery
Weight:
0.96 oz. (27.3g) excluding battery
Included:
AA Battery
Spare O-Ring
Lanyard
Manufacturer Part No: | FNX-E12 | Brand: | Fenix | Product Type: | Mini Keychain Flashlight |
UPC | - | Product Family: | Everyday Carry Torch | Shipping Weight: | 0.05 kg |
PB Part No: | TOLFNX0018 | Product Model: | E12 V2.0 | ||
Warranty: | 12 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
great product great product
Warning:
- This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone's eyes.
- All information provided in this manual is subject to change without prior notice.
The Fenix E12 V2.0 AA Flashlight emits an impressive maximum 160 lumens from an included single AA battery. Using an ultra-thin optical lens, this flashlight delivers a soft and balanced beam a max distance of 223ft (68m). Access three brightness levels with a tap of the tail switch. At only 3" long, this flashlight is a great everyday carry size, and with its two-position body clip, you can carry it as you want-even clip it to your hat and use it as a headlamp. This little flashlight is built tough with an IP68 dustproof and waterproof rating. It's hard to beat the ease of powering your flashlight with one single AA battery. Super small and bright, the Fenix E12 V2.0 is a great upgrade for those looking for a AA powered EDC flashlight.
- MATCH CA18 cool white LED with a lifespan of 50,000 hours.
- Included single AA battery, easy to find (Ni-MH/Alkaline).
- Automobile ultra-thin optical lens coating process.
- No standby current, safe and cost-efficient.
- One-handed operation with the single tail switch.
- Two-position body clip and tail standing capability for varying conditions.
- Made of durable A6061-T6 aluminum.
- Premium type HAIII hard-anodized anti-abrasive finish.
On/off for the E12 V2.0 AA Flashlight: Fully press the tail switch to turn on/off the light.
Output Selection: With the light switched on, tap the tail switch to cycle through Low, Med, High.
Intelligent Memory Circuit: The light does not memorize the previously used output level, each time it is turned on, Low mode will be activated.
Battery Replacement: Unscrew the light tail and insert the battery with the anode side (+) towards the light head, then screw the light tailback on.
Low-voltage Warning: When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. To ensure normal use, the flashlight will not turn off automatically and will work till the battery runs out completely.
- Disassembling the sealed head can cause damage to the light and will void the warranty.
- Fenix recommends using an excellent quality battery.
- If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
- Unscrew the tail cap half a turn or take out the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
- Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: The battery needs replacing.
Solution: Replace battery (Ensure batteryis inserted according to the manufacturer's specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
Output Lumens
Low: 5
Medium: 30
High: 160
Runtime
Low: 70H
Medium: 13H
High: 1H
Distance
Low: 39ft
Medium: 92ft
High: 223ft
Intencity
Low: 31cd
Medium: 185cd
High: 1133cd
Waterproof
IP68 Up tp 2M
Size:
Length: 3.06" (76.6mm)
Body: 0.69" (17.6mm)
Head: 0.75" (19mm)
Battery
One Included AA Battery
Weight:
0.96 oz. (27.3g) excluding battery
Included:
AA Battery
Spare O-Ring
Lanyard
"I'm just so happy with PB Tech over the years. Bought this computer I'm typing on nearly 8..."
"Once again EXCELLENT friendly service from Saad . Was quick to respond and helped me resolve my..."
"Thank you to Saad Malik, replied and solved my problem very quick:)"
"Excellent tv mount, simple to install, ordering online was simple, delivery was quick,"
"Always such great products at the best prices around. Have never had any issues with anything I..."
"Great service provided. Quick responses to emails too. Well done."
"I bought pc parts from here half a year ago to build my pc from Alex Ng at Manukau. Few months..."
"Martin has helped me with multiple purchases. He's my go to if I need anything. His..."
"Appreciate Saad Malik's quick response on my on-line order issues. Thank You, Sir."
"Pre ordered a Samsung Galaxy S21 Ultra. Arrived 2 days earlier than advertised. ..."
The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1 working day for North Island deliveries and 2 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.
Need your order in a hurry? PB Tech offers same day delivery for the Auckland region. Simple place your order before 2pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.
PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com
PB Tech holds a significant amount of stock in our New Zealand based logistics centre and can ship stock from this location usually within 2-4 working days (see the timeframes mentioned on each product page for more accurate delivery estimates).
In most cases, items ordered from the NZ Logistics Centre are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
Unfortunately no pick-up options are available directly from this location, you can select a pick up from one of our branches however and we will transfer your order there so you can pick up.
Products marked as 'In stock with Supplier' are shipped from one of our suppliers / vendors. The time frame for shipments can vary so please refer to the shipping time frames mentioned on each product page for more accurate delivery estimates.
In most cases, items ordered from suppliers are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.
To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.
If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.
Please note, items purchased on finance cannot be exchanged for a gift card.
If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.
If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.
To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).
To return a product to PB Tech directly, please complete our request a return form.
Or view our returns policy for more information.