Departments
Five easy payments of $66.87 per fortnight*
humm lets you spread the cost of your purchase over 5 or 10 interest free payments.
Click the button below or select humm as your payment method during the checkout process.
If you do not have a humm account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about humm
Six easy payments of $55.72 per week*
Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.
Click the button below or select Laybuy as your payment method during the checkout process.
If you do not have a Laybuy account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Laybuy
Finance from $3.48 per week*
Get what you want at a price you can afford. Choose a finance term below to see the weekly repayment amount and apply online during checkout or in-store.
Choose a Finance Term
*Repayments shown above are indicitive only and may vary. Ts and Cs and lending criteria apply.
Learn more about Finance Now
- High Performance Computer and Electronics UPS for Premium Power Protection
- Includes: USB cable, User manual
Provides notification of changing utility power and UPS power conditions
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable
Provides protection of connected equipment from power surges on the data lines.
Warns when a battery is not available to provide backup power.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Provides management of the UPS via a USB port (not available on all models).
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
APC Warranty Info
All APC UPS’s have a 3 year warranty however the batteries on these UPS’s are only supported for 2 years. You can check the factory warranty of an APC UPS by following this link: http://www.apc.com/site/support/nz/en/warranty-services
Output
Max Configurable Power (Watts)
390Watts / 650VA
Output Frequency (sync to mains)
50/60 Hz +/- 1 Hz Sync to mains
Topology
Line interactive
Waveform type
Stepped approximation to a sinewave
Transfer Time
10 ms typical : 12 ms maximum
Input
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
176 - 294V
Batteries & Runtime
Battery type
Lead-acid battery
Typical recharge time
12hour(s)
Replacement Battery
APCRBC110
Expected Battery Life (years)
3 - 5
RBC Quantity
1
Battery Charge Power (Watts)
6Watts
Battery Volt-Amp-Hour Capacity
75
Communications & Management
Interface Port(s)
USB
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Data Line Protection
RJ45 network line - 10/100/1000 Base-T Ethernet
Filtering
Full time multi-pole noise filtering : 10% of IEEE surge let-through : zero clamping response time: instantaneous
Physical
Maximum Height
190MM, 19.0CM
Maximum Width
91MM, 9.1CM
Maximum Depth
310MM, 31.0CM
Net Weight
6.4KG
Shipping weight
7.4KG
Shipping Height
255MM, 25.5CM
Shipping Width
440MM, 44.0CM
Shipping Depth
143MM, 14.3CM
Master Carton Dimensions (Length x Width x Height)
279 x 457 x 229MM
Master Carton Units
2.0
Master Carton Weight
15.65
SCC Codes
10731304346934
Environmental
Operating Temperature
0 - 40 °C
Operating Relative Humidity
0 - 95 %
Operating Elevation
0 - 3048meters
Storage Temperature
-15 - 45 °C
Storage Elevation
0 - 15240meters
Audible noise at 1 meter from surface of unit
45.0dBA
Online thermal dissipation
13.0BTU/hr
Manufacturer Part No: | BR650MI | Brand: | APC | Product Type: | - |
UPC | 731304346937 | Product Family: | - | Shipping Weight: | 7.35 kg |
PB Part No: | UPSAPC0650 | Product Model: | - | ||
Warranty: | 36 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
- High Performance Computer and Electronics UPS for Premium Power Protection
- Includes: USB cable, User manual
Provides notification of changing utility power and UPS power conditions
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable
Provides protection of connected equipment from power surges on the data lines.
Warns when a battery is not available to provide backup power.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Provides management of the UPS via a USB port (not available on all models).
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
APC Warranty Info
All APC UPS’s have a 3 year warranty however the batteries on these UPS’s are only supported for 2 years. You can check the factory warranty of an APC UPS by following this link: http://www.apc.com/site/support/nz/en/warranty-services
Output
Max Configurable Power (Watts)
390Watts / 650VA
Output Frequency (sync to mains)
50/60 Hz +/- 1 Hz Sync to mains
Topology
Line interactive
Waveform type
Stepped approximation to a sinewave
Transfer Time
10 ms typical : 12 ms maximum
Input
Input frequency
50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations
176 - 294V
Batteries & Runtime
Battery type
Lead-acid battery
Typical recharge time
12hour(s)
Replacement Battery
APCRBC110
Expected Battery Life (years)
3 - 5
RBC Quantity
1
Battery Charge Power (Watts)
6Watts
Battery Volt-Amp-Hour Capacity
75
Communications & Management
Interface Port(s)
USB
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Data Line Protection
RJ45 network line - 10/100/1000 Base-T Ethernet
Filtering
Full time multi-pole noise filtering : 10% of IEEE surge let-through : zero clamping response time: instantaneous
Physical
Maximum Height
190MM, 19.0CM
Maximum Width
91MM, 9.1CM
Maximum Depth
310MM, 31.0CM
Net Weight
6.4KG
Shipping weight
7.4KG
Shipping Height
255MM, 25.5CM
Shipping Width
440MM, 44.0CM
Shipping Depth
143MM, 14.3CM
Master Carton Dimensions (Length x Width x Height)
279 x 457 x 229MM
Master Carton Units
2.0
Master Carton Weight
15.65
SCC Codes
10731304346934
Environmental
Operating Temperature
0 - 40 °C
Operating Relative Humidity
0 - 95 %
Operating Elevation
0 - 3048meters
Storage Temperature
-15 - 45 °C
Storage Elevation
0 - 15240meters
Audible noise at 1 meter from surface of unit
45.0dBA
Online thermal dissipation
13.0BTU/hr
"Saad Malik was extremely helpful. ..."
"For an entire PC's worth of hardware, they processed it and had it arive at my place within two..."
"I really love this store. On my first purchased I really satisfied the items. Each items posted..."
"I’d like to share feedback of Yvonne Wang at PBTech North Shore branch. I’ve been lucky enough..."
"Visited city Central branch and was helped by Eric, He was enthusiastic about computer hardware..."
"I bought a Linksys velop mesh tri band extender system after a great consultation with Helia...."
"Thanks for the quick service :) always reliable work from the folk at Pbtech!"
The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1 working day for North Island deliveries and 2 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.
Need your order in a hurry? PB Tech offers same day delivery for the Auckland region. Simple place your order before 2pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.
PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com
PB Tech holds a significant amount of stock in our New Zealand based logistics centre and can ship stock from this location usually within 2-4 working days (see the timeframes mentioned on each product page for more accurate delivery estimates).
In most cases, items ordered from the NZ Logistics Centre are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
Unfortunately no pick-up options are available directly from this location, you can select a pick up from one of our branches however and we will transfer your order there so you can pick up.
Products marked as 'In stock with Supplier' are shipped from one of our suppliers / vendors. The time frame for shipments can vary so please refer to the shipping time frames mentioned on each product page for more accurate delivery estimates.
In most cases, items ordered from suppliers are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.
To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.
If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.
Please note, items purchased on finance cannot be exchanged for a gift card.
If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.
If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.
To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).
To return a product to PB Tech directly, please complete our request a return form.
Or view our returns policy for more information.