Easy install.
Low cost.
Great performance.
Quiet.
Fits almost all common, modern CPUs.

This is the price/performance sweet spot at time of writing.

Oh - it comes with thermal grease so don't buy it separately. Easy install.
Low cost.
Great performance.
Quiet.
Fits almost all common, modern CPUs.

This is the price/performance sweet spot at time of writing.

Oh - it comes with thermal grease so don't buy it separately.

Well built unit, easy to follow instructions and hassle free installation and includes RGB - For the price you can't go wrong with this unit for budget builds.

Performance wise I'm using this AIO watercooler on a Ryzen 3 3100 CPU and it does a great job of keeping it cool in a case which is very airflow limited and small in size. (Idle Temps = 31, Full Load Temps = 54)

Two things to be aware of:
- You can hear the pump on initial startup of the PC (like it goes full speed then reduces)
- Water pipes exit the right hand side so some motherboards might have fitment issue (eg RAM spacing issues) Well built unit, easy to follow instructions and hassle free installation and includes RGB - For the price you can't go wrong with this unit for budget builds.

Performance wise I'm using this AIO watercooler on a Ryzen 3 3100 CPU and it does a great job of keeping it cool in a case which is very airflow limited and small in size. (Idle Temps = 31, Full Load Temps = 54)

Two things to be aware of:
- You can hear the pump on initial startup of the PC (like it goes full speed then reduces)
- Water pipes exit the right hand side so some motherboards might have fitment issue (eg RAM spacing issues)

Works well, it runs quiet after I changed fan speed to silent in bios, rgb looks good and fits well so don’t really have any complaints. Works well, it runs quiet after I changed fan speed to silent in bios, rgb looks good and fits well so don’t really have any complaints.

At the beginning l, its hard to configure the whole installation process. As I have an AMD motherboard, the package doesnt include a backing plate. But other than that, It an amazing product! At the beginning l, its hard to configure the whole installation process. As I have an AMD motherboard, the package doesnt include a backing plate. But other than that, It an amazing product!

This has noisy fans, they are spring loaded and bounce at certain RPMs causing a rattling noise. However, I found adjusting the fan speed in the bios can eliminate the noise without compromising on cooling. Overall reasonably happy, but I would definitely look at alternatives if I were to build another gaming rig. This has noisy fans, they are spring loaded and bounce at certain RPMs causing a rattling noise. However, I found adjusting the fan speed in the bios can eliminate the noise without compromising on cooling. Overall reasonably happy, but I would definitely look at alternatives if I were to build another gaming rig.

I bought this as a replacement for one bought two years ago that had noisy fans. I'm not optimistic that the fans will stay quiet. It cools well. I bought this as a replacement for one bought two years ago that had noisy fans. I'm not optimistic that the fans will stay quiet. It cools well.

Classy looking cooler that doesn't generate much noise. A bit pricey but no regrets Classy looking cooler that doesn't generate much noise. A bit pricey but no regrets

Awesome product performed much better that expected a++ Awesome product performed much better that expected a++

works well happy with the product works well happy with the product

Managed to get it on sale and it works great. Had to do some figuring out on where to put it in my case (Phanteks Enthoo Pro Full Tower). The only real place I could put it was on the top, with the fans underneath pushing air out of the case through the grill.

It was very easy to install and the RGB looks nice, expecially when synced up with other components.

Some of the RGB cables are a little bit touchy and don't quite lock into the motherboard pins as well as I hoped. Managed to get it on sale and it works great. Had to do some figuring out on where to put it in my case (Phanteks Enthoo Pro Full Tower). The only real place I could put it was on the top, with the fans underneath pushing air out of the case through the grill.

It was very easy to install and the RGB looks nice, expecially when synced up with other components.

Some of the RGB cables are a little bit touchy and don't quite lock into the motherboard pins as well as I hoped.

Reasonable for the cheap price you pay, good instructions if you need them, this has to be the quietest AIO I have used... Holds my 3600 under 70C under a constant full load for 24 hrs + at a time. Don't buy one if you have a 3800X - 5800X or higher powered CPU... get a NZXT Kraken or equivalent (I have owned these in the past) that are built and perform better. It sits in the price bracket of the crappy to average air coolers that make a lot of noise and saturate with heat quickly, which is another reason I got this over an air cooler for my use case (long periods of time under full load). Reasonable for the cheap price you pay, good instructions if you need them, this has to be the quietest AIO I have used... Holds my 3600 under 70C under a constant full load for 24 hrs + at a time. Don't buy one if you have a 3800X - 5800X or higher powered CPU... get a NZXT Kraken or equivalent (I have owned these in the past) that are built and perform better. It sits in the price bracket of the crappy to average air coolers that make a lot of noise and saturate with heat quickly, which is another reason I got this over an air cooler for my use case (long periods of time under full load).

It was very easy to install, as is typical with an AIO you need to have pins for the water pump that are on all of the time, my MB doesn't have any, so I set them to be sys1 and in the bios set that to full. The temperatures are being kept firmly under control.
The fans are a little noisy, however, and continuously spin up and down as they keep the CPU at the correct temperature, which can get on your nerves a bit. That's out of the box, using custom fan controls I'm sure they ramp up and down can be controlled. I did check reviews prior that also mentioned the noisy fans, so I was not surprised. It was very easy to install, as is typical with an AIO you need to have pins for the water pump that are on all of the time, my MB doesn't have any, so I set them to be sys1 and in the bios set that to full. The temperatures are being kept firmly under control.
The fans are a little noisy, however, and continuously spin up and down as they keep the CPU at the correct temperature, which can get on your nerves a bit. That's out of the box, using custom fan controls I'm sure they ramp up and down can be controlled. I did check reviews prior that also mentioned the noisy fans, so I was not surprised.