Four easy payments of $67.69 per fortnight*
Oxipay lets you spread the cost of your purchase over 4 fortnightly payments.
Click the button below or select Oxipay as your payment method during the checkout process.
If you do not have an Oxipay account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Oxipay
Six easy payments of $45.12 per week*
Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.
Click the button below or select Laybuy as your payment method during the checkout process.
If you do not have a Laybuy account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Laybuy
Finance from $2.96 per week*
Get what you want at a price you can afford. Choose a finance term below to see the weekly repayment amount and apply online during checkout or in-store.
Choose a Finance Term
*Repayments shown above are indicitive only and may vary. Ts and Cs and lending criteria apply.
Learn more about Finance Now
No payments or interest for 12 months available*
Q Card / Mastercard is your perfect shopping partner, combining the benefits of a credit card with the added ability to access a range of interest-free deals and payment holidays.
Learn more about Q Mastercard, apply online for one now, or email finance@pbtech.co.nz to chat with our finance team.
*Ts and Cs and lending criteria apply.
Learn more about Q Card
EKWB EK-Vector Strix RTX 2080 Ti RGB - full-cover water block...
EKWB EK-Quantum Vector RTX RE Ti D-RGB Nickel + Plexi RTX 2080 Ti...
EKWB EK-Vector RTX Backplate - Black fits all EK-Vector RTX 2080...
EKWB Scalar Dual 4-slot Acetal high-quality interconnection for...
EKWB EK-Scalar Dual 3-slot - Plexi
The EK-Quantum Vector RTX RE Ti D-RGB high-performance water block is an evolution of the original EK-Quantum Vector water block where the standard 12V RGB is changed with 5V D-RGB which has separately addressable diodes. This water block is specially designed for multiple reference NVIDIA® GeForce® RTX 2080 Ti graphics cards. This product is also compatible with the reference NVIDIA GeForce RTX SUPER cards. For detailed compatibility check the EK Configurator. The cooling engine is tweaked for even more performance with an optimized flow pattern. It also offers extended compatibility fitting more reference design based graphics cards.
This water block is compatible with all reference design GeForce RTX 2080 Ti-based graphics cards, but as always, we recommend that you refer to the EK® Cooling Configurator for a precise compatibility match.
The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks.
The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.
The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of glass-like Acrylic. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. The front aesthetic corner piece is lit up with an addressable LED strip. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(addressable) header.
EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section.
G1/4" threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. The EK-Quantum Vector RTX RE Ti GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.
Enclosed:
EK-Quantum Vector RTX RE Ti D-RGB series high-performance water block
Mounting mechanism with screw-in brass standoffs
Necessary mounting screws, nuts, and washers
2x Nickel plated brass plug G1/4"
6mm Allen key
Thermal pads
Thermal grease EK-TIM Ectotherm (1g)
Material / Design / Color option
Nickel Plexi
Threads
G1/4
Chip Manufacturer
Nvidia GeForce
| Manufacturer Part No: | EK-Quantum Vector RTX RE Ti D-RGB Nickel + Plexi | Brand: | EKWB | Product Type: | Nickel + Plexi |
| UPC | - | Product Family: | EK-Quantum | Shipping Weight: | 1.15 kg |
| PB Part No: | WTREKW814352 | Product Model: | Vector RTX RE Ti D-RGB | ||
| Warranty: | 12 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
||||
The EK-Quantum Vector RTX RE Ti D-RGB high-performance water block is an evolution of the original EK-Quantum Vector water block where the standard 12V RGB is changed with 5V D-RGB which has separately addressable diodes. This water block is specially designed for multiple reference NVIDIA® GeForce® RTX 2080 Ti graphics cards. This product is also compatible with the reference NVIDIA GeForce RTX SUPER cards. For detailed compatibility check the EK Configurator. The cooling engine is tweaked for even more performance with an optimized flow pattern. It also offers extended compatibility fitting more reference design based graphics cards.
This water block is compatible with all reference design GeForce RTX 2080 Ti-based graphics cards, but as always, we recommend that you refer to the EK® Cooling Configurator for a precise compatibility match.
The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks.
The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.
The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of glass-like Acrylic. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. The front aesthetic corner piece is lit up with an addressable LED strip. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(addressable) header.
EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section.
G1/4" threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. The EK-Quantum Vector RTX RE Ti GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.
Enclosed:
EK-Quantum Vector RTX RE Ti D-RGB series high-performance water block
Mounting mechanism with screw-in brass standoffs
Necessary mounting screws, nuts, and washers
2x Nickel plated brass plug G1/4"
6mm Allen key
Thermal pads
Thermal grease EK-TIM Ectotherm (1g)
Material / Design / Color option
Nickel Plexi
Threads
G1/4
Chip Manufacturer
Nvidia GeForce
The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1 working day for North Island deliveries and 2 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.
Need your order in a hurry? PB Tech offers same day delivery for the Auckland region. Simple place your order before 2pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
You can pick-up your online order from any of our branches nationwide. You can select which branch you want to pick up from the checkout. Please note that if the branch you want to pick up from doesn't have stock of one or more of the items in your order, it may take 3-4 working days to transfer the stock to the branch so your order can be fulfilled.
PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com
PB Tech holds a significant amount of stock in our New Zealand based logistics centre and can ship stock from this location usually within 2-4 working days (see the timeframes mentioned on each product page for more accurate delivery estimates).
In most cases, items ordered from the NZ Logistics Centre are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
Unfortunately no pick-up options are available directly from this location, you can select a pick up from one of our branches however and we will transfer your order there so you can pick up.
Products marked as 'In stock with Supplier' are shipped from one of our suppliers / vendors. The time frame for shipments can vary so please refer to the shipping time frames mentioned on each product page for more accurate delivery estimates.
In most cases, items ordered from suppliers are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.
To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.
If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.
Please note, items purchased on finance cannot be exchanged for a gift card.
If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.
If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.
To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).
To return a product to PB Tech directly, please complete our request a return form.
Or view our returns policy for more information.
Top Rated BYOD Devices of 2020 at PB Tech 
.jpg){kind=avatar}
