Creality CR-PETG Filament - Transparent

This Creality ABS was very good to print with. Very little smell and nice strong parts. Easy to dial in and tune to work with my printer. I highly recommend this stuff. This Creality ABS was very good to print with. Very little smell and nice strong parts. Easy to dial in and tune to work with my printer. I highly recommend this stuff.

Good quality print Good quality print

Worked well in a K1C Worked well in a K1C

Prints really well Prints really well

Printing at 70deg bed, 250deg nozzle, 40mm/s and -1.15z offset on Ender3 v3 SE.

Must dry before hand or you'll get bubbles which will be extremely apparent in your print, and keep in a dry box during printing as it's quite hygroscopic, only last 2 days in 50% RH before going bubbly after drying.

Comes out extremely translucent, probably about as close to transparent you can print.

Sticks VERY well to the PEI bed of the Ender, so lay down some glue stick in a cross-hatch pattern before you print!!
Will not impact final print quality, but will allow for well compressed layers without ripping chunks off your bed.

I've made an in...view more Printing at 70deg bed, 250deg nozzle, 40mm/s and -1.15z offset on Ender3 v3 SE.

Must dry before hand or you'll get bubbles which will be extremely apparent in your print, and keep in a dry box during printing as it's quite hygroscopic, only last 2 days in 50% RH before going bubbly after drying.

Comes out extremely translucent, probably about as close to transparent you can print.

Sticks VERY well to the PEI bed of the Ender, so lay down some glue stick in a cross-hatch pattern before you print!!
Will not impact final print quality, but will allow for well compressed layers without ripping chunks off your bed.

I've made an invisishield (very cool lenticular panel which allows you to bend light and 'hide' objects.) and light lampshade (pictured)

By: JeremyH55 09/09/24

Verified Owner

Very happy with the product, exceeded expectations. Good price point too Very happy with the product, exceeded expectations. Good price point too

I bought this to run on my Creality K1 Max 3D printer. It is very dark Green - almost Black. Worked well but remember to pick the correct settings. I bought this to run on my Creality K1 Max 3D printer. It is very dark Green - almost Black. Worked well but remember to pick the correct settings.

Print quality is fantastic compared to the cheaper brands I've gone with in the past. Well worth the extra money, and even better as it was on sale. Print quality is fantastic compared to the cheaper brands I've gone with in the past. Well worth the extra money, and even better as it was on sale.

The Matt PLA is really good at hiding layer lines in prints and has an overall better feel. Great that it comes in a cardboard spool too! The Matt PLA is really good at hiding layer lines in prints and has an overall better feel. Great that it comes in a cardboard spool too!

Works perfectly on my K1 Max. Great colour. Works perfectly on my K1 Max. Great colour.

nice color but do forget if you are high speed printer use hyper one nice color but do forget if you are high speed printer use hyper one

I have done very few prints with this as yet, so don't know it well enough to give it five stars. However, the prints I have done went well, with nozzle temperatures between 200C and 210C, and bed temperature between 50C and 60C, 0.2mm layer, speeds mostly around 180mm/s. So far, the filament is working well for me, it was good value for the price compared to competitors even though not on sale, and I would purchase again in future. I have done very few prints with this as yet, so don't know it well enough to give it five stars. However, the prints I have done went well, with nozzle temperatures between 200C and 210C, and bed temperature between 50C and 60C, 0.2mm layer, speeds mostly around 180mm/s. So far, the filament is working well for me, it was good value for the price compared to competitors even though not on sale, and I would purchase again in future.