Creality HP-TPU Filament for High Speed 3D Printer - White

The other comment on here says not good fillament. I've printed a few things with this stuff in 2 of the colors it prints good, funny enough i used my previous creality hyper series pla setting to print with this. Which I tuned with orca slicer. Interesting enough if you check out Amazon reviews people with creality printers seem to have alot of problems as mentioned above. But funny enough bambu users seem to report better results. Which is quite ironic. I would recommend if your using a bambu printer. The other comment on here says not good fillament. I've printed a few things with this stuff in 2 of the colors it prints good, funny enough i used my previous creality hyper series pla setting to print with this. Which I tuned with orca slicer. Interesting enough if you check out Amazon reviews people with creality printers seem to have alot of problems as mentioned above. But funny enough bambu users seem to report better results. Which is quite ironic. I would recommend if your using a bambu printer.

Works really well, minimal lifting and warping issues
Make sure to print this in a ventilated area Works really well, minimal lifting and warping issues
Make sure to print this in a ventilated area

great product works well great product works well

Smooth, consistent prints with minimal clogging or stringing. Excellent choice for everyday prototyping and hobby projects. Smooth, consistent prints with minimal clogging or stringing. Excellent choice for everyday prototyping and hobby projects.

Smooth, consistent prints with minimal clogging or stringing. Excellent choice for everyday prototyping and hobby projects. Smooth, consistent prints with minimal clogging or stringing. Excellent choice for everyday prototyping and hobby projects.

so i have a roll of white and have given up every print so far the stuff brakes so have only got one thing printed and that was the first job so i have a roll of white and have given up every print so far the stuff brakes so have only got one thing printed and that was the first job

Had multiple issues getting adhesive to stick to the baseplate - haven’t had this issue with any other filament used in my printer. Used multiple other printers that shared this same issue. Eventually, the result was satisfactory but still isn’t worth dealing with the many failed prints to get the end result that would’ve been the same with a different filament. Had multiple issues getting adhesive to stick to the baseplate - haven’t had this issue with any other filament used in my printer. Used multiple other printers that shared this same issue. Eventually, the result was satisfactory but still isn’t worth dealing with the many failed prints to get the end result that would’ve been the same with a different filament.

i found the filament very good to use and so far have had no issues with it also thanks pbtech 5 stars i found the filament very good to use and so far have had no issues with it also thanks pbtech 5 stars

Good filament but great service, honestly was so good talking to staff about 3D printers while I shopped and they even had several on display and printing things in the PB Tech store! Good filament but great service, honestly was so good talking to staff about 3D printers while I shopped and they even had several on display and printing things in the PB Tech store!

By: BenB899 01/05/25

The best PETG I tried so far. Glass-like transparency, very strong prints. The best PETG I tried so far. Glass-like transparency, very strong prints.

Bought on sale, couldn't find a lower priced equivalent anywhere at the time. The advertised pre-sale price was still pretty good anyway, before the sale.
Have so far only done some test prints and some prototype protective cases for my own small circuit boards, and only using a Creality Ender-3 V3 SE. Working well for that purpose.
Printing all at 180mm/s, 200 C, so can't comment on suitability for faster printing, and haven't had a situation to put to test the stated extra toughness of this PLA+ versus standard PLA.
Great value for the printing I've been doing with it so far though. Bought on sale, couldn't find a lower priced equivalent anywhere at the time. The advertised pre-sale price was still pretty good anyway, before the sale.
Have so far only done some test prints and some prototype protective cases for my own small circuit boards, and only using a Creality Ender-3 V3 SE. Working well for that purpose.
Printing all at 180mm/s, 200 C, so can't comment on suitability for faster printing, and haven't had a situation to put to test the stated extra toughness of this PLA+ versus standard PLA.
Great value for the printing I've been doing with it so far though.

Great filament, prints well with no issues in our Bambu P1S with AMS Great filament, prints well with no issues in our Bambu P1S with AMS