VICTRON Pheonix 24/250 Inverter PIN242510300 VIC NZ VE DIRECT
Out of stock
VICTRON Pheonix 24/250 Inverter PIN242510300 VIC NZ VE DIRECT
- Brand: VICTRON
- MPN: PIN242510300
- Part #: BATVTN1021
- UPC:
- Brand: VICTRON
- MPN: PIN242510300
- Part #: BATVTN1021
- UPC:
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular Other Batteries





VICTRON Pheonix 24/250 Inverter PIN242510300 VIC NZ VE DIRECT
- Brand: VICTRON
- MPN: PIN242510300
- Part #: BATVTN1021

Product URL: https://www.pbtech.co.nz/product/BATVTN1021/VICTRON-Pheonix-24250-Inverter-PIN242510300-VIC-NZ?srsltid=AfmBOorwExc0VmSFf0fzMWeLgOGL2uSxBj_hb3yQfM88u3Bg8IUp0IQ6
Branch | New Stock | On Display |
---|---|---|
Auckland - Albany | 0 | |
Auckland - Glenfield | 0 | |
Auckland - Queen Street | 0 | |
Auckland - Auckland Uni | 0 | |
Auckland - Newmarket | 0 | |
Auckland - Westgate | 0 | |
Auckland - Penrose | 0 | |
Auckland - Henderson (Express) | 0 | |
Auckland - St Lukes | 0 | |
Auckland - Manukau | 0 | |
Hamilton | 0 | |
Tauranga | 0 | |
New Plymouth | 0 | |
Palmerston North | 0 | |
Petone | 0 | |
Wellington | 0 | |
Auckland - Head Office | 0 | |
Auckland - East Tamaki Warehouse | 0 | |
Christchurch - Hornby | 0 | |
Christchurch - Christchurch Central | 0 | |
Dunedin | 0 |
Features
VICTRON Pheonix 24/250 Inverter PIN242510300 VIC NZ VE DIRECT
Inverters allow you to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC.
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USB interface cable needed)
- Apple and Android smartphones, tablets, MacBook's and other devices
- (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 - 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
Monitoring:
- In- and output voltage, % load and alarms
- Proven reliability
- The full bridge plus toroidal transformer topology has proven its reliability over many years.
- The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the
left hand contact of the two pole connector.
LED diagnosis
Please see manual for a description.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.
Available with different output sockets
Schuko, UK, AU/NZ, IEC-320, Nema 5-15R
DC connection with screw terminals
No special tools needed for installation.
Specifications
Inverter
Input voltage range (V DC)
9.5-17 v
19- 33 v
38 - 66 v
Output
Output voltage: 230 VAC ± 2%
Frequency: 50 Hz ± 0.1%
Cont. output power at 25°C
250
Cont. output power at 40°C (W)
175
Peak power (W)
400
Maximum efficiency
88%
Zero load power (W)
5.2
Zero load power in ECO mode (W)
1.3
Enclosure
Common Characteristics
Material & Colour: Steel Chassis and plastic cover (blue RAL 5012)
Protection category: IP 21
Battery-connection
Screw Terminals
Weight (kg)
2.4
Dimensions (hxwxd in mm)
86x165x260
Accessories
Remote On Off
Filax Automatic transfer switch
Standards
Safety
EN-IEC 60335-1, EN-IEC 603350-29, IEC 62109-1
Emission, Immunity
EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3