Tamiya 47498 1/10 TA08R CHASSIS KIT
Out of stock
- Brand: Tamiya
- MPN: Tamiya 47498
- Part #: MDLTMA47498
- UPC:
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular Other Plastic Model Kits





Tamiya 47498 1/10 TA08R CHASSIS KIT
- Brand: Tamiya
- MPN: Tamiya 47498
- Part #: MDLTMA47498

Product URL: https://www.pbtech.co.nz/product/MDLTMA47498/Tamiya-47498-110-TA08R-CHASSIS-KIT
Branch | New Stock | On Display |
---|---|---|
Auckland - Albany | 0 | |
Auckland - Glenfield | 0 | |
Auckland - Queen Street | 0 | |
Auckland - Auckland Uni | 0 | |
Auckland - Newmarket | 0 | |
Auckland - Westgate | 0 | |
Auckland - Penrose | 0 | |
Auckland - Henderson (Express) | 0 | |
Auckland - St Lukes | 0 | |
Auckland - Manukau | 0 | |
Hamilton | 0 | |
Tauranga | 0 | |
New Plymouth | 0 | |
Palmerston North | 0 | |
Petone | 0 | |
Wellington | 0 | |
Auckland - Head Office | 0 | |
Auckland - East Tamaki Warehouse | 0 | |
Christchurch - Hornby | 0 | |
Christchurch - Christchurch Central | 0 | |
Dunedin | 0 |
Features
This assembly kit takes the 2-belt driven TA08 chassis and makes it into a race-focussed unit with plenty of Hop-Up Options. It is equipped with a 2mm carbon fiber upper deck, plus a plastic lower deck with reinforcements for exemplary rigidity and superior steering that can be adjusted to your heart's content. A-shaped upper arms and a four-wheel double wishbone suspension setup are employed, while aluminum upper arm mounts ensure great rigidity. The rear body mount section has been stiffened for great traction.
Drivetrain
- Full ball bearings
- Front double cardan drive shafts
- Rear universal shafts
- Front direct pulley (aluminum direct cups)
- 71T spur gear (TRF420 center pulley)
- Rear gear differential (aluminum diff joints, VG O-ring)
- Aluminum motor mount
Suspension
- Front & rear aluminum upper arm mounts
- Aluminum adjustable suspension mount
- Separate suspension mounts (XB/A)
- Low-friction king pin balls
- Super short big bore dampers (VG O-rings)
Chassis
- Carbon fiber upper deck (2.0mm)
- Carbon fiber rear body mount plate (2.5mm)
- Aluminum rear body mount posts
- Aluminum servo mount
- Aluminum steering linkage
- Clamp-type wheel hubs (4mm)
The rigid aluminum servo mount minimizes inefficiency.
Steering tie-rods are in a linear arrangement to lessen the effect of suspension motion on toe angle. Brigde and arms are aluminum.
Aluminum mounts make for great upper A-arm rigidity. Low friction king pin balls are used atop and below the uprights.
A close up on the super short big bore dampers. 43mm drive shafts and 4mm clamp-type hex hubs are employed.
The 2mm carbon fiber upper deck boosts pitching rigidity. A rear ball bearing lends smoothness to the chassis flex.
The aluminum motor mount has upper deck attachment points front and rear.
Additional ribs on the lower deck minimize flex. Adjustable suspension mounts are employed.
Rear universal shafts use 43mm swing shafts, TRF420 wheel axles and low friction cross joints.
Toe control rear suspension helps match toe angle with compressed suspension.
Rear body mounts are attached on a carbon fiber plate and aluminum mounts to keep that body from wobbling.
Specifications
Product Type
Plastic model assembly kit
Brand
Tamiya
Scale
1/10
Length
373mm (chassis only)
Width
182mm
Wheelbase
257mm
Chassis Design
Stepped V carbon fiber reinforced plastic lower deck
Drive System
Transverse motor 2-belt driven 4WD
Differentials
Front direct coupling rear oil-filled gear differential
Steering System
3-piece steering tie-rod
Suspension
4-wheel independent double wishbone suspension
Dampers
TRF Super Short Big Bore Dampers
Separately Required Items (Not Included)
Body
Tires
Type 540 motor
2-channel R/C system w/ESC
R6/AA/UM3 batteries for transmitter
Battery pack & charger