LUMI LDT16-C024 dual Gas Spring Monitor Arm pivot and swivel fits 17"-32" VESA 75x75,100x100 Tilt Range: +35°~-35° Swivel Range: +90°~-90° Black Colour

I have a 32" (main) and 27" (secondary) monitor. My desk is also 800mm deep, so ultra deep.
This product in this configuration does not cut the mustard. The monitors need to be side by side, and I prefer having my main monitor front on and 2nd monitor on an angle.

If I had a standard size desk then this would be ideal. I have replaced with 2 single monitor arms from the same company, and have even had to be creative with how they are mounted to get my desired result.

The product is sturdy, well constructed, easy to assemble and setup, just in this case did not suit my needs.

You really need to think about your desk depth, and how...view more I have a 32" (main) and 27" (secondary) monitor. My desk is also 800mm deep, so ultra deep.
This product in this configuration does not cut the mustard. The monitors need to be side by side, and I prefer having my main monitor front on and 2nd monitor on an angle.

If I had a standard size desk then this would be ideal. I have replaced with 2 single monitor arms from the same company, and have even had to be creative with how they are mounted to get my desired result.

The product is sturdy, well constructed, easy to assemble and setup, just in this case did not suit my needs.

You really need to think about your desk depth, and how you like your monitors arranged as this may not be the best option for everyone.

I had to return my initial order because one of the screws were unbelievably tight but pb tech promptly exchanged my product. This product is overall very sturdy with a nice finish. I've had this for more than a month. It can hold a 24 inch monitor very well and I don't doubt that it can hold much more than that steadily. My only problem with this is that the VESA bracket which connects the monitor to the arm is loose no matter how tight it is screwed on which makes the monitor wobble slightly before it starts moving when you try to move it. I had to return my initial order because one of the screws were unbelievably tight but pb tech promptly exchanged my product. This product is overall very sturdy with a nice finish. I've had this for more than a month. It can hold a 24 inch monitor very well and I don't doubt that it can hold much more than that steadily. My only problem with this is that the VESA bracket which connects the monitor to the arm is loose no matter how tight it is screwed on which makes the monitor wobble slightly before it starts moving when you try to move it.

First one I got had a dud arm and would not hold up any monitor, PBTech sorted out a replacement and the setup is pretty good, managed to stack two 32" LG Ultragear monitors on top of each other by lifting the base of the monitor stand up using a block of wood. First one I got had a dud arm and would not hold up any monitor, PBTech sorted out a replacement and the setup is pretty good, managed to stack two 32" LG Ultragear monitors on top of each other by lifting the base of the monitor stand up using a block of wood.

Not suitable for having one screen above the other. I've got 2x 27" screens and without one screen touching the desk, it is impossible to have the other above.

The plastic is also brittle, one of the covers on an arm broke taking it out of the packaging. Not suitable for having one screen above the other. I've got 2x 27" screens and without one screen touching the desk, it is impossible to have the other above.

The plastic is also brittle, one of the covers on an arm broke taking it out of the packaging.

Good value - This one seems sturdier than the cheaper Loctek one and close to as sturdy as the Startech one which is too expensive. Great middle ground. Good value - This one seems sturdier than the cheaper Loctek one and close to as sturdy as the Startech one which is too expensive. Great middle ground.

Once I figured out what bolt to tighten, the arms held up my screens and it was good Once I figured out what bolt to tighten, the arms held up my screens and it was good

I got two of these so that I could have a 4x monitor setup with 2x horizontal and 2x vertical. There was more than enough flexibility in the arms to get the positions I was after. I got two of these so that I could have a 4x monitor setup with 2x horizontal and 2x vertical. There was more than enough flexibility in the arms to get the positions I was after.

Just what I needed, and what it says it does. Set-up was straight forward. This mount allows the ability to independently set the height for both arms which is amazing. I have two different monitors, and the VESA mounts are at different heights on the back. A standard mount wouldn't work for me. This is perfect, and my OCD is now in check haha Just what I needed, and what it says it does. Set-up was straight forward. This mount allows the ability to independently set the height for both arms which is amazing. I have two different monitors, and the VESA mounts are at different heights on the back. A standard mount wouldn't work for me. This is perfect, and my OCD is now in check haha

Pretty good all round. Lost 1 star because one of the screw threads was duff... but we're an engineering company, so just put a nut on the back of the plate. Sorted.

Looks tidy, all cables are routed, so keeps the desk clear. Pretty good all round. Lost 1 star because one of the screw threads was duff... but we're an engineering company, so just put a nut on the back of the plate. Sorted.

Looks tidy, all cables are routed, so keeps the desk clear.

Nice looking, works on on my 31inch screen. Easy to set up.
A little bit of a pain to unpack do to zip ties holding the arms folded up. But once I figured out the trick it was easy. Nice looking, works on on my 31inch screen. Easy to set up.
A little bit of a pain to unpack do to zip ties holding the arms folded up. But once I figured out the trick it was easy.

This mount is such a spacesaver on my desk and helps improve the aesthetic a lot compared to having my screens mounted on their default stands. One of the best features about this product is the gas spring in the arms. This makes it so much better because of how annoying it can be to loosen and tighten the monitor arm in other systems. It also has nice covers on the arms for concealing cables. This mount is such a spacesaver on my desk and helps improve the aesthetic a lot compared to having my screens mounted on their default stands. One of the best features about this product is the gas spring in the arms. This makes it so much better because of how annoying it can be to loosen and tighten the monitor arm in other systems. It also has nice covers on the arms for concealing cables.

I managed to make it work with my 2x 32" monitors (one sitting on top of other) but but it required me to use a spacer for table clamp and sit the bottom monitor on desk. I managed to make it work with my 2x 32" monitors (one sitting on top of other) but but it required me to use a spacer for table clamp and sit the bottom monitor on desk.