Amazon eero 6+ (AX3000) Dual-Band WiFi 6 Mesh Router System - 3 Pack

Two days ago I purchased an Eero 6+ from PB Tech, expecting it to work directly with my NZ fibre ONT, as you would with most routers. Nowhere on PB Tech’s website did it mention that this device does NOT support VLAN tagging, which is required by most NZ ISPs (2degrees, Spark, Voyager, Slingshot, etc.).

The Problem
• Eero 6+ does NOT support VLAN tagging, so it cannot connect directly to the ONT in NZ.
• PB Tech failed to mention this anywhere on their product listing.
• After setting it up, I had no internet and had to do research to find out that I need extra hardware (a managed switch or ISP router in bridge mode) just to make it ...view more Two days ago I purchased an Eero 6+ from PB Tech, expecting it to work directly with my NZ fibre ONT, as you would with most routers. Nowhere on PB Tech’s website did it mention that this device does NOT support VLAN tagging, which is required by most NZ ISPs (2degrees, Spark, Voyager, Slingshot, etc.).

The Problem
• Eero 6+ does NOT support VLAN tagging, so it cannot connect directly to the ONT in NZ.
• PB Tech failed to mention this anywhere on their product listing.
• After setting it up, I had no internet and had to do research to find out that I need extra hardware (a managed switch or ISP router in bridge mode) just to make it work.

PB Tech Should Be More Transparent

❌ Nowhere in the product description does PB Tech warn customers about this issue.
❌ Most people would assume a router will work with their ONT, but Eero does NOT unless you buy extra equipment.
❌ This should be made clear BEFORE purchase.

What PB Tech Should Do

✅ Clearly state on the product page that Eero does NOT support VLAN 10 and requires additional hardware for NZ fibre users.
✅ Advise customers to buy a managed switch (e.g., TP-Link TL-SG105E) or use an ISP router in bridge mode.
✅ Improve customer support around NZ network compatibility issues.

Final Verdict

⚠️ If you’re in NZ and buying Eero 6+ from PB Tech, BE AWARE: It will NOT work directly with your ONT.
🚫 You’ll need to buy additional hardware, which PB Tech does not tell you upfront.
👎 Disappointed in the lack of transparency—PB Tech, please do better!

Helpful Setup Note for NZ Fibre Users (Regarding VLAN 10)

Thank you to the original reviewer for flagging this frustrating setup issue. We understand the confusion!

Quick Fix: The eero 6+ DOES support VLAN tagging, but the setting is not prominent during initial setup. You do not need to buy extra hardware (managed switch).
If you are connecting your eero directly to your NZ Fibre ONT (for ISPs like Spark, 2degrees, Vodafone PPPoE, etc.), you must manually enable VLAN 10 after the initial setup attempt:
1. Open the eero App.
2. Go to Settings.
3. Select Network Settings.
4. Select ISP Settings.
5. Enable Uplink VLAN and set the VL...view more Helpful Setup Note for NZ Fibre Users (Regarding VLAN 10)

Thank you to the original reviewer for flagging this frustrating setup issue. We understand the confusion!

Quick Fix: The eero 6+ DOES support VLAN tagging, but the setting is not prominent during initial setup. You do not need to buy extra hardware (managed switch).
If you are connecting your eero directly to your NZ Fibre ONT (for ISPs like Spark, 2degrees, Vodafone PPPoE, etc.), you must manually enable VLAN 10 after the initial setup attempt:
1. Open the eero App.
2. Go to Settings.
3. Select Network Settings.
4. Select ISP Settings.
5. Enable Uplink VLAN and set the VLAN ID to 10.
6. Tap Apply Settings.
This is the critical step to establish your internet connection. This information is available on Page 5, Step 9 of the setup guide on the product page. The app is being worked on to prompt for this setting automatically.

PB Tech 29/10/25

Despite the instructions, before you start make sure you have the details for the connection to your ISP. It did not make a reasonable guess for the settings for fibre connection to 2degrees.
Once past that hurdle, setup was a breeze and everything else was back up and running surprisingly quickly. The work laptop that wouldn't connect on previous wifi 6 had no problems connecting to the new wifi 6 mesh system.
The reduced number of wired network ports meant there wasn't one available for Brother mfc-J6955dw which doesn't play well with wireless connections. A switch is a necessity to add enough ports.
There is no fixing to attach to wall o...view more Despite the instructions, before you start make sure you have the details for the connection to your ISP. It did not make a reasonable guess for the settings for fibre connection to 2degrees.
Once past that hurdle, setup was a breeze and everything else was back up and running surprisingly quickly. The work laptop that wouldn't connect on previous wifi 6 had no problems connecting to the new wifi 6 mesh system.
The reduced number of wired network ports meant there wasn't one available for Brother mfc-J6955dw which doesn't play well with wireless connections. A switch is a necessity to add enough ports.
There is no fixing to attach to wall or ceiling

found this mesh system easy to set-up. PB tech state additional required equipment is simply your existing modem connected to the ONT. plug in your mesh network into a port on your modem set up on app done. found this mesh system easy to set-up. PB tech state additional required equipment is simply your existing modem connected to the ONT. plug in your mesh network into a port on your modem set up on app done.