GIVE FEEDBACK

Generating Print Page

UbiBot Soil-Probe-3M-R-Audio Soil Temperature and Moisture Probe for GS1 3 Metres

PB Tech price
PB Tech price
$ 70 .43
 +GST
$ 80 .99
 inc GST
$70.43  +GST
$80.99

UbiBot Soil-Probe-3M-R-Audio Soil Temperature and Moisture Probe for GS1 3 Metres

  • Brand: UbiBot
  • MPN: Soil-Probe-3M-R-Audio
  • Part #: NETUBB1018
  • UPC:
PB Tech price
$ 70 .43 $ 80 .99
 +GST  inc GST

No store stock available.

Click & Collect: Select your store to check availability
Delivery: Order now and it ships on 19 Sep When will I receive it?
$70.43  +GST
$80.99
  • Brand: UbiBot
  • MPN: Soil-Probe-3M-R-Audio
  • Part #: NETUBB1018
  • UPC:

Features

Ubibot Soil Temperature and Moisture Probe for GS1 3 Metres - Audio Connector

This product adopts modbus-rtu protocol, and the computer can monitor the temperature through the communication mode of RS485 interface. Cooperate with GS1 series product to monitor the data on computer platform or mobile APP, and generate soil moisture and temperature report through the platform. The soil temperature and moisture sensor measures soil moisture content based on frequency domain reflection method. We think of the soil as a capacitance containing a medium, according to transmission line theory, the circuit due to the load impedance mismatch appear under a certain frequency resonant migration, reflection amplitude value is not the same at the same time, through comparing the difference of reflection wave and the incident wave amplitude value, measure the capacitance of the multiple reflection wave caused by the changes, and then measure the soil moisture content. The probe shell is made of ABS, which has good resistance to acid and alkali corrosion. The shell is completely wrapped and can reach the IP68 waterproof level, which means that the probe can be continuously measured in water.

- High precision, wide range, good consistency.
- Super stability and anti-interference.
- Wide voltage input,DC5-12V.
- Standard MODBUS RTU protocol.

1. All communication circuits shall follow the master/slave mode. In this way, data can be transferred between one primary station (e.g., PC) and multiple sub-stations. Any communication cannot start from a slave.

2. The information transmission mode is asynchronous, byte format is 1 start bit, 8 data bits, and 1 stop bit, no check.

3. Compliance with MODUBS RTU protocol standards.

4. The default baud rate is 9600 and the address is 0xC2.

Cooperate with GS1 to achieve remote monitoring, report generation and other functions.

RS485 Interface

Widely used in homes, offices, farms and other places where soil temperature and moistureneedtobe measured

Specifications

Compatibility

Designed for use with UbiBot GS1 devices

Connector Type

Audio Connector

Cable Length

3 meters

Probe Material

Stainless steel

Operating Temperature Range

-40°C to +85°C (-40°F to +185°F)

Temperature Accuracy

±0.5°C

Moisture Measurement Range

0% to 100%

Moisture Accuracy

±3% (0-50%), ±5% (>50%)

Power Supply

DC 5V to 12V

Output Interface

RS485, ModBus RTU

Waterproof Rating

IP68

Construction

ABS shell with resistance to acid and alkali corrosion

Measurement Method

Utilizes frequency domain reflection for moisture detection

 

Manufacturer Part No:
Soil-Probe-3M-R-Audio
Brand:
UbiBot
Product Type:
-
UPC
-
Product Family:
-
Shipping Weight:
0.5 kg
PB Part No:
NETUBB1018
Product Model:
Soil-Probe-3M-R-Audio
Warranty: 12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

There are currently no reviews for this product

Do you own this product?

Write a review and go into the monthly draw Win A $100 PB Tech Gift Card!

Delivery & Pick-up

Potential courier delays: Please note that due to the high volumes currently within the NZ courier network there is potential for some deliveries to be delayed.

Delivery Estimates

The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1-2 working days for North Island deliveries and 2-3 working days for South Island deliveries. Rural deliveries may take an extra working day. Bulk & hazard deliveries may take an extra 2-4 working days.

Next Day Delivery

Need your order in a hurry? PB Tech offers next day delivery for local Auckland addresses. Simple place your order before 4pm (provided your items are in stock) and select our next day delivery option in the checkout. T&C's apply. Learn more about Next Day Delivery.

Same Day Delivery

Need your order in a hurry? PB Tech offers same day delivery for Auckland, Hamilton, Wellington and Christchurch. Simple place your order before 1pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.

Shipping Costs

Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.

To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.

Shipping Security & Insurance

All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.

1 Hour Store Pick-up / Click & Collect

You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.

Overseas Shipments

PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com

Returns & Warranty

7 day right of exchange

If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.

To exchange a product, goods must be sealed and unopened, with packaging in original condition, accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange. A 20% restocking fee may be applied where goods are not returned in sealed, original packaging condition.

If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase. Items purchased on finance cannot be exchanged for a gift card.

 

Hassle free warranty service

If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.

If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.

 

Returning a product / making a warranty claim

To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).

To return a product to PB Tech directly, please complete our request a return form.

Or view our returns policy for more information.

UbiBot Soil-Probe-3M-R-Audio Soil Temperature and Moisture Probe for GS1 3 Metres

  • Brand: UbiBot
  • MPN: Soil-Probe-3M-R-Audio
  • Part #: NETUBB1018
PB Tech price $70.43 Excluding GST PB Tech price $80.99 Including GST

Date Created: 11:33, 13-09-2025
Product URL: https://www.pbtech.co.nz/product/NETUBB1018/UbiBot-Soil-Probe-3M-R-Audio-Soil-Temperature-and?srsltid=AfmBOooQjCLvdRTxhHj0I9Wmc5nC5kAhwgMSr13De6SbOOAHmxqtjWcg
Branch New Stock On Display
Auckland - Albany 0
Auckland - Glenfield 0
Auckland - Queen Street 0
Auckland - Auckland Uni 0
Auckland - Newmarket 0
Auckland - Westgate 0
Auckland - Penrose 0
Auckland - Henderson (Express) 0
Auckland - St Lukes 0
Auckland - Manukau 0
Hamilton 0
Tauranga 0
New Plymouth 0
Palmerston North 0
Petone 0
Wellington 0
Auckland - Head Office 0
Auckland - East Tamaki Warehouse 0
Christchurch - Hornby 0
Christchurch - Christchurch Central 0
Dunedin 0

Features

Ubibot Soil Temperature and Moisture Probe for GS1 3 Metres - Audio Connector

This product adopts modbus-rtu protocol, and the computer can monitor the temperature through the communication mode of RS485 interface. Cooperate with GS1 series product to monitor the data on computer platform or mobile APP, and generate soil moisture and temperature report through the platform. The soil temperature and moisture sensor measures soil moisture content based on frequency domain reflection method. We think of the soil as a capacitance containing a medium, according to transmission line theory, the circuit due to the load impedance mismatch appear under a certain frequency resonant migration, reflection amplitude value is not the same at the same time, through comparing the difference of reflection wave and the incident wave amplitude value, measure the capacitance of the multiple reflection wave caused by the changes, and then measure the soil moisture content. The probe shell is made of ABS, which has good resistance to acid and alkali corrosion. The shell is completely wrapped and can reach the IP68 waterproof level, which means that the probe can be continuously measured in water.

- High precision, wide range, good consistency.
- Super stability and anti-interference.
- Wide voltage input,DC5-12V.
- Standard MODBUS RTU protocol.

1. All communication circuits shall follow the master/slave mode. In this way, data can be transferred between one primary station (e.g., PC) and multiple sub-stations. Any communication cannot start from a slave.

2. The information transmission mode is asynchronous, byte format is 1 start bit, 8 data bits, and 1 stop bit, no check.

3. Compliance with MODUBS RTU protocol standards.

4. The default baud rate is 9600 and the address is 0xC2.

Cooperate with GS1 to achieve remote monitoring, report generation and other functions.

RS485 Interface

Widely used in homes, offices, farms and other places where soil temperature and moistureneedtobe measured

Specifications

Compatibility

Designed for use with UbiBot GS1 devices

Connector Type

Audio Connector

Cable Length

3 meters

Probe Material

Stainless steel

Operating Temperature Range

-40°C to +85°C (-40°F to +185°F)

Temperature Accuracy

±0.5°C

Moisture Measurement Range

0% to 100%

Moisture Accuracy

±3% (0-50%), ±5% (>50%)

Power Supply

DC 5V to 12V

Output Interface

RS485, ModBus RTU

Waterproof Rating

IP68

Construction

ABS shell with resistance to acid and alkali corrosion

Measurement Method

Utilizes frequency domain reflection for moisture detection

 

Date Created: 11:33, 13-09-2025
Product URL: https://www.pbtech.co.nz/product/NETUBB1018/UbiBot-Soil-Probe-3M-R-Audio-Soil-Temperature-and?srsltid=AfmBOooQjCLvdRTxhHj0I9Wmc5nC5kAhwgMSr13De6SbOOAHmxqtjWcg