FSL RAV1201-CL112-30K LED Downlight LFS SMD-12W-110mm, Warm White 3000K, Dimmable IP44, Cut 115mm

I bought 18 of these. All work fine. The tricky part about installing was because I was replacing units with screw terminals which have a large internal diameter. The wires I was installing onto were already stripped mid-wire (there's a length of unbroken copper with insulation at both ends), and I didn't want to cut the copper. I had to expose more copper and really flatten the copper fold to get it to fit into the terminals. I bought 18 of these. All work fine. The tricky part about installing was because I was replacing units with screw terminals which have a large internal diameter. The wires I was installing onto were already stripped mid-wire (there's a length of unbroken copper with insulation at both ends), and I didn't want to cut the copper. I had to expose more copper and really flatten the copper fold to get it to fit into the terminals.

Nothing against PBTech, you guys are legends and I'll keep coming back. The lights are a shocker though, these same lights used to have a regular screw connectors for the drivers - now this batch seems to have been changed to a "screw-less" type. This might be great for some wiring, but plenty of houses still have old single-core wires which dont fit, or only just. When you're in the ceiling soaking in sweat, trying to line up the original 1990s wiring with this screwless connector its a bloody nightmare. Please, next time you're ordering these lights, switch back to the regular connectors with screws. Nothing against PBTech, you guys are legends and I'll keep coming back. The lights are a shocker though, these same lights used to have a regular screw connectors for the drivers - now this batch seems to have been changed to a "screw-less" type. This might be great for some wiring, but plenty of houses still have old single-core wires which dont fit, or only just. When you're in the ceiling soaking in sweat, trying to line up the original 1990s wiring with this screwless connector its a bloody nightmare. Please, next time you're ordering these lights, switch back to the regular connectors with screws.

Great price, Easy in install, the only negative is the drivers have sit above the insulation but that’s not a deal breaker. Great price, Easy in install, the only negative is the drivers have sit above the insulation but that’s not a deal breaker.

This is the only 110mm cut-out 12W aluminum-made LED IP44 downlight below $20. All other plastic-made lights from Bunnings/Mitre 10 are either more expensive or with quite a few negative reviews. There is a 1-sec delay in lighting up, but it is normal for SMD LED. I have used LEDFOCUS's FSL LED bulbs including MR16, GU10, E27, B22, and PAR38 for years, all 10/10. Simply a quality and affordable trustworthy brand. This is the only 110mm cut-out 12W aluminum-made LED IP44 downlight below $20. All other plastic-made lights from Bunnings/Mitre 10 are either more expensive or with quite a few negative reviews. There is a 1-sec delay in lighting up, but it is normal for SMD LED. I have used LEDFOCUS's FSL LED bulbs including MR16, GU10, E27, B22, and PAR38 for years, all 10/10. Simply a quality and affordable trustworthy brand.