Lian Li O11D MINI Black ATX MidTower Gaming Case Tempered Glass, Support ATX/mATX/ITX, CPU Cooler Supports Upto 172mm, GPU Supports Upto 395mm, 7x PCI Slot, 360mm Radiator Supported, SFX/ SFX-L PSU required. Front I/O: 1x Type C, 2x USB, HD

Putting the fully modular aspect aside, I found this case to be quite a challenge to build in.

The case itself is well made and well packaged. I found some of the modular screws to be super tight almost as if they were fitted while the paint was still drying. The box of spare screws comes in handy in case one gets damaged during the initial unscrew.

Requiring a small form factor (SFX) power supply unit wasn't a big deal. They are readily available, costing a little more than an standard sized PSU. You could fit two SFX power supplies by removing the hard drive bay, if you were to say, run duel 3090's in some sort of SLI config.

I ...view more Putting the fully modular aspect aside, I found this case to be quite a challenge to build in.

The case itself is well made and well packaged. I found some of the modular screws to be super tight almost as if they were fitted while the paint was still drying. The box of spare screws comes in handy in case one gets damaged during the initial unscrew.

Requiring a small form factor (SFX) power supply unit wasn't a big deal. They are readily available, costing a little more than an standard sized PSU. You could fit two SFX power supplies by removing the hard drive bay, if you were to say, run duel 3090's in some sort of SLI config.

I was hoping there was more room to fit a radiator to the top of the case when using a full size ATX motherboard. Or even room for a 360mm radiator mounted to the side. Unfortunately 280 is the biggest that can go side mounted with 360 only available at the bottom of the case when using a full ATX motherboard, obviously not suitable for an AIO. that aside you can fit 360mm worth of fans on the top as long as its only fans you want to place there.

The cable management is fantastic. Best I have dealt with! You would only be let down by the cables that come with your PSU. and they can always be changed out to custom made cables.
In order vertical mount your GPU, like everything based on this case, you need to buy an expensive bracket designed especially for this case (available at PB tech) which is available in both PCI-e gen 3 and 4. That aside, this is a future proofed case that will probably outlast the next couple of CPU/MB upgrades you will no doubt be purchasing in the future.

I want to keep with a particular theme while using the Lian Li UNI fans for more ARGB control but the finished product will come at a considerable cost. But if your buying this case to make an incredibly beautiful machine, then that's going to cost you. Just perhaps more than you think.

Overall, I feel this case would be suited an MATX build to ensure you have room at the top of the case for a radiator. This case when coupled with the right fans and water cooling config would be the last case you would ever need to buy.

This case really brings modular to the next level. It has so many panels that can be configured for different niece use cases that it really is a one case fits all solution.
It also looks absolutely fantastic!

My only real gripe is the need for the SFX power supply. This case is already very chunky, would it really have hurt to make it a fraction wider to accommodate a standard atx power supply? That small detail aside this is a great case to build in and it really does a great job of showing off your build This case really brings modular to the next level. It has so many panels that can be configured for different niece use cases that it really is a one case fits all solution.
It also looks absolutely fantastic!

My only real gripe is the need for the SFX power supply. This case is already very chunky, would it really have hurt to make it a fraction wider to accommodate a standard atx power supply? That small detail aside this is a great case to build in and it really does a great job of showing off your build

Apart from its stunning looks (especially with any type of lighting in it) and its fully modular design it was a very good case to build in, also the cable management was great as if your lazy like me you can do minimal cable managing at the back of the case and just zip tie it to stuff. Don't let the idea of having to use a smaller power supply fool you as there are many available, however it is quite a wide case so if your desk is small and doesn't have much space even if it does have a look at the dimensions to see if they will fit your desk or where ever your putting it. Overall one of the best cases on the market in my opinion. Apart from its stunning looks (especially with any type of lighting in it) and its fully modular design it was a very good case to build in, also the cable management was great as if your lazy like me you can do minimal cable managing at the back of the case and just zip tie it to stuff. Don't let the idea of having to use a smaller power supply fool you as there are many available, however it is quite a wide case so if your desk is small and doesn't have much space even if it does have a look at the dimensions to see if they will fit your desk or where ever your putting it. Overall one of the best cases on the market in my opinion.

I wish I found this case years ago. Suitable for almost all motherboards, great air flow, beautiful looking, well made. Would highly recommend. Only thing to not is that it only allows for SFX psu I wish I found this case years ago. Suitable for almost all motherboards, great air flow, beautiful looking, well made. Would highly recommend. Only thing to not is that it only allows for SFX psu

The best thing Lian Li ever did was talk to Der Bauer and grace the world with the O11D line of chassis and the mini variant doesn't fail to please. Room for even the biggest boards, flexible layout for smaller boards, plenty of space for drives, fans and cooling solutions... and it's altogether not that much bigger than contemporary mATX cases.

I picked this up for my partner who had run out of room in her In Win 301. It more than easily fitted all her existing hardware with room to spare and space for water cooling options in future. The only drawback to keep in mind is the power supply - to keep the width manageable it uses an SFX suppl...view more The best thing Lian Li ever did was talk to Der Bauer and grace the world with the O11D line of chassis and the mini variant doesn't fail to please. Room for even the biggest boards, flexible layout for smaller boards, plenty of space for drives, fans and cooling solutions... and it's altogether not that much bigger than contemporary mATX cases.

I picked this up for my partner who had run out of room in her In Win 301. It more than easily fitted all her existing hardware with room to spare and space for water cooling options in future. The only drawback to keep in mind is the power supply - to keep the width manageable it uses an SFX supply, luckily between Silverstone, Corsair and Lian Li themselves there are some good options around now in that field.

Two thumbs up, highly recommended.

In my opinion this is the best 'no compromise' smaller I have ever used for a rig. Only weird design I though is the plate on the back that the SSDs mount to has one thumb screw and one philips head screw - what's the point of mixing the styles if you're going to have to pul out a screw driver anyways. Same with the 3.5" HDD. Acces to the HDDs is easy with a thumbscrew but getting the caddy out - revert back to screw driver. One feature I really like - needle point thumbscrews - makes locating those threads so much easier. Also the way the glass panels are held in place - very tidy and sleek. In my opinion this is the best 'no compromise' smaller I have ever used for a rig. Only weird design I though is the plate on the back that the SSDs mount to has one thumb screw and one philips head screw - what's the point of mixing the styles if you're going to have to pul out a screw driver anyways. Same with the 3.5" HDD. Acces to the HDDs is easy with a thumbscrew but getting the caddy out - revert back to screw driver. One feature I really like - needle point thumbscrews - makes locating those threads so much easier. Also the way the glass panels are held in place - very tidy and sleek.

I love this case, not only can it fit normal parts it is small enough to save space on my desk. Love the all white as well! The only thing I’d say when buying this case is to make sure you get a smaller power supply like an SFX as the normal ones dont fit. I love this case, not only can it fit normal parts it is small enough to save space on my desk. Love the all white as well! The only thing I’d say when buying this case is to make sure you get a smaller power supply like an SFX as the normal ones dont fit.

Smallish case with heaps of room. if you want something inside it, it fits. only downside is that it takes a SFX psu. temps are impressive and with some cheap rgb fans and a AIO cooler, wows everyone who sees it. You just cant regret the purchase. Smallish case with heaps of room. if you want something inside it, it fits. only downside is that it takes a SFX psu. temps are impressive and with some cheap rgb fans and a AIO cooler, wows everyone who sees it. You just cant regret the purchase.

By: SydneyB 31/03/22

Verified Owner

It's compact but it has penalty of space for your build. Good quality and rigid. the only side back is you have to provide a sfx power supply It's compact but it has penalty of space for your build. Good quality and rigid. the only side back is you have to provide a sfx power supply

The color of white is jsut perfect, cant find any other in the market right now. The color of white is jsut perfect, cant find any other in the market right now.

This case is great for any mobo size(ATX, mATX, ITX), the white aesthetic looks clean for white builds. Only thing is an SFX power supply is needed. This case is great for any mobo size(ATX, mATX, ITX), the white aesthetic looks clean for white builds. Only thing is an SFX power supply is needed.

Great product with a cool and aesthetic design Great product with a cool and aesthetic design