GIVE FEEDBACK

Generating Print Page

eSun ePLA-LW Filament - Natural

Compatible with Most FDM 3D Printers such as Creality / Bambu Lab / AnkerMaker / Raise3D / Flsun

PB Tech price
PB Tech price
$ 51 .30
 +GST
$ 59 .00
 inc GST
$51.30  +GST
$59.00

eSun ePLA-LW Filament - Natural

Compatible with Most FDM 3D Printers such as Creality / Bambu Lab / AnkerMaker / Raise3D / Flsun

  • Brand: eSun
  • MPN: PLA-LW175W1Y1
  • Part #: INKESN0075
  • UPC: 840249101607
1
PB Tech price
$ 51 .30 $ 59 .00
 +GST  inc GST


Click & Collect: Available from 13 stores.
Select your store to check availability
Delivery: Order now and it ships tomorrow When will I receive it?
$51.30  +GST
$59.00
  • Brand: eSun
  • MPN: PLA-LW175W1Y1
  • Part #: INKESN0075
  • UPC: 840249101607

Colour

Natural

3D Printer Resin Type

N/A

Features

NOTE: The filament DOES NOT support multi-colour printing!

ePLA-LW

Light weight pla filament is a material specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. ePLA-LW use active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0.54g/cm3.

Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the Light weight pla filament enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.

- Density as low as 0.54g/cm3
- Foaming volume ratio 220%
- Free adjustment of strength and foaming ratio
- Excellent matte surface effect
- Good interlayer adhesion
- Easy to paint
- Excellent printability

Tips

 

Notes

1. Note that the first layer speed setting is consistent with the actual printing speed, set to 100% of the actual printing speed, turn off the first layer and small area printing speed reduction function, the first layer extrusion rate is consistent with the actual foaming extrusion rate, such as 270 degrees set to 45% of the first layer extrusion rate; if the bed adhesion is too strong, you can set the bottom valve when printing.
2. Pay attention to the maximum operating temperature of the printer. Most Teflon tube printers cannot be operated for a long time above 250?. Long-term printing above this temperature may cause blocking. If the temperature exceeds 250?, high temperature printers such as metal hoses are required for printing.
3. Yellowing of printed parts after high temperature foaming is a normal phenomenon. Lowering the printing temperature can relieve it.
4. Since the ePLA-LW foams continuously in the melting cavity of the high-temperature nozzle, the retraction basically does not work. Stringing is normal during printing. It is recommended to print the rc plane in vase mode to reduce the effect of stringing.
5. Foaming ratio is related to temperature, printing speed, nozzle melting cavity size, pay attention to compare model design wall thickness according to your own printing situation, adjust extrusion rate, temperature, speed and other parameters.

ePLA-LW_02

Specifications

Filament Properties Table

3D PRINTING FILAMENT

ePLA-LW

Density(g/cm3)

1.2

Heat Distortion Temp(?,0.45MPa)

53

Melt Flow Index(g/10min)

8.1(190?/2.16kg)

Tensile Strength(MPa)

32.2

Elongation at Break(%)

68.9

Flexural Strength(MPa)

41.31

Flexural Modulus(MPa)

1701

IZOD Impact Strength(kJ/?)

8.58

Durability

4/10

Printability

9/10

Recommended printing parameters

Extruder Temperature(?)

190 - 270?

Bed temperature(?)

45 - 60°C

Fan Speed

100%

Printing Speed

40 - 100mm/s

Heated Bed

Optional

Recommended Build Surfaces

Masking paper, PVP solid glue, PEI

Manufacturer Part No:
PLA-LW175W1Y1
Brand:
Product Type:
Filament
UPC
840249101607
Product Family:
-
Shipping Weight:
1.35 kg
PB Part No:
INKESN0075
Product Model:
ePLA-LW
Warranty: 12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

2 out of 5 Stars Based on 1 review
5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
1
1 Stars
0

Do you own this product?

Write a review and go into the monthly draw Win A $100 PB Tech Gift Card!

Active foaming LW-PLA is hard

Product was good and as described. The issue is it's natural. It is an active foaming product. This means it expands as it is extruded meaning you will spend a number of hours tuning your extrusion and printer profile to print correctly.

Just by a pre-foamed filament, save yourself the hassle.

NW
By: NathanW624 03/07/25
Verified Owner
0 out of 0 users found this review helpful
Did you find it helpful?

Delivery & Pick-up

Potential courier delays: Please note that due to the high volumes currently within the NZ courier network there is potential for some deliveries to be delayed.

Delivery Estimates

The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1-2 working days for North Island deliveries and 2-3 working days for South Island deliveries. Rural deliveries may take an extra working day. Bulk & hazard deliveries may take an extra 2-4 working days.

Next Day Delivery

Need your order in a hurry? PB Tech offers next day delivery for local Auckland addresses. Simple place your order before 4pm (provided your items are in stock) and select our next day delivery option in the checkout. T&C's apply. Learn more about Next Day Delivery.

Same Day Delivery

Need your order in a hurry? PB Tech offers same day delivery for Auckland, Hamilton, Wellington and Christchurch. Simple place your order before 1pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.

Shipping Costs

Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.

To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.

Shipping Security & Insurance

All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.

1 Hour Store Pick-up / Click & Collect

You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.

Overseas Shipments

PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com

Returns & Warranty

7 day right of exchange

If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.

To exchange a product, goods must be sealed and unopened, with packaging in original condition, accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange. A 20% restocking fee may be applied where goods are not returned in sealed, original packaging condition.

If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase. Items purchased on finance cannot be exchanged for a gift card.

 

Hassle free warranty service

If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.

If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.

 

Returning a product / making a warranty claim

To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).

To return a product to PB Tech directly, please complete our request a return form.

Or view our returns policy for more information.

eSun ePLA-LW Filament - Natural Compatible with Most FDM 3D Printers such as Creality / Bambu Lab / AnkerMaker / Raise3D / Flsun

  • Brand: eSun
  • MPN: PLA-LW175W1Y1
  • Part #: INKESN0075
  • UPC:840249101607
PB Tech price $51.30 Excluding GST PB Tech price $59.00 Including GST

Date Created: 16:30, 24-09-2025
Product URL: https://www.pbtech.co.nz/product/INKESN0075/eSun-ePLA-LW-Filament---Natural-Compatible-with-Mo
Branch New Stock On Display
Auckland - Albany 0
Auckland - Glenfield 2
Auckland - Queen Street 0
Auckland - Auckland Uni 2
Auckland - Newmarket 0
Auckland - Westgate 2
Auckland - Penrose 2
Auckland - Henderson (Express) 1
Auckland - St Lukes 0
Auckland - Manukau 0
Hamilton 2
Tauranga 3
New Plymouth 1
Palmerston North 2
Petone 6
Wellington 2
Auckland - Head Office 30+
Auckland - East Tamaki Warehouse 0
Christchurch - Hornby 5
Christchurch - Christchurch Central 3
Dunedin 0

Features

NOTE: The filament DOES NOT support multi-colour printing!

ePLA-LW

Light weight pla filament is a material specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. ePLA-LW use active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0.54g/cm3.

Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the Light weight pla filament enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.

- Density as low as 0.54g/cm3
- Foaming volume ratio 220%
- Free adjustment of strength and foaming ratio
- Excellent matte surface effect
- Good interlayer adhesion
- Easy to paint
- Excellent printability

Tips

 

Notes

1. Note that the first layer speed setting is consistent with the actual printing speed, set to 100% of the actual printing speed, turn off the first layer and small area printing speed reduction function, the first layer extrusion rate is consistent with the actual foaming extrusion rate, such as 270 degrees set to 45% of the first layer extrusion rate; if the bed adhesion is too strong, you can set the bottom valve when printing.
2. Pay attention to the maximum operating temperature of the printer. Most Teflon tube printers cannot be operated for a long time above 250?. Long-term printing above this temperature may cause blocking. If the temperature exceeds 250?, high temperature printers such as metal hoses are required for printing.
3. Yellowing of printed parts after high temperature foaming is a normal phenomenon. Lowering the printing temperature can relieve it.
4. Since the ePLA-LW foams continuously in the melting cavity of the high-temperature nozzle, the retraction basically does not work. Stringing is normal during printing. It is recommended to print the rc plane in vase mode to reduce the effect of stringing.
5. Foaming ratio is related to temperature, printing speed, nozzle melting cavity size, pay attention to compare model design wall thickness according to your own printing situation, adjust extrusion rate, temperature, speed and other parameters.

ePLA-LW_02

Specifications

Filament Properties Table

3D PRINTING FILAMENT

ePLA-LW

Density(g/cm3)

1.2

Heat Distortion Temp(?,0.45MPa)

53

Melt Flow Index(g/10min)

8.1(190?/2.16kg)

Tensile Strength(MPa)

32.2

Elongation at Break(%)

68.9

Flexural Strength(MPa)

41.31

Flexural Modulus(MPa)

1701

IZOD Impact Strength(kJ/?)

8.58

Durability

4/10

Printability

9/10

Recommended printing parameters

Extruder Temperature(?)

190 - 270?

Bed temperature(?)

45 - 60°C

Fan Speed

100%

Printing Speed

40 - 100mm/s

Heated Bed

Optional

Recommended Build Surfaces

Masking paper, PVP solid glue, PEI

Date Created: 16:30, 24-09-2025
Product URL: https://www.pbtech.co.nz/product/INKESN0075/eSun-ePLA-LW-Filament---Natural-Compatible-with-Mo