Departments
Five easy payments of $19.57 per fortnight*
humm lets you spread the cost of your purchase over 5 or 10 interest free payments.
Click the button below or select humm as your payment method during the checkout process.
If you do not have a humm account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about humm
Six easy payments of $16.31 per week*
Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.
Click the button below or select Laybuy as your payment method during the checkout process.
If you do not have a Laybuy account you will be able to create one at checkout.
*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.
Learn more about Laybuy
"A great product, when adjusted correctly works really well"
"Very good build quality - the product is pretty solid and weighs a bit so make sure you have a steady, weighted desk, otherwise the whole desk might wobble.
Installation was ...view more"
"Product came with good packaging without and scratches or damage. Product is as described and perform well. It helped me to clear a lot of space on my desk and at the same time it ...view more"
DLB508 features 360° rotation, -85°/+15° tilt up & down, -90°/+90° tilt left & right and 180° swivel arms which fully extend to 20 inches (512cm). Just use your hands to move your monitors into the desired position - no tools required!
Height adjustment through the spring arms, swivel/articulate each arm connection, tilt and rotate at the monitor holder. The mechanical spring hovering system makes it incredibly easy to change monitor height with the touch of a finger.
Allow wires to move freely while you adjust your screen position.
C-clamp and grommet mount bases are included for easy and quick installation.
Model name
DLB508
Weight Capacity
2-9kg (4.4 - 19.8 lbs.)
Material
Aircraft grade aluminum
Screen Tilt
85° up and 15° down
Screen Pivot
± 90°
Arm Pivot
± 180°
Fit screen
17" - 30"
Extension
512 mm / 20 inch
Lift
423 mm / 16.7 inch
VESA
75 Ă 75;100 Ă 100
Manufacturer Part No: | DLB508 | Brand: | Loctek | Product Type: | Gas Spring Monitor Stand |
UPC | - | Product Family: | Pro Mount, | Shipping Weight: | 3.08 kg |
PB Part No: | MOALCK0120 | Product Model: | 17"-30" Single Ergonomic | ||
Warranty: | 60 months local warranty * * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified. |
Holds by 34" ultrawide and doesn't slip out of position. Amazingly flexible and solid design. Holds by 34" ultrawide and doesn't slip out of position. Amazingly flexible and solid design.
Works well on the loctek 1800mmx800m desk. Works well on the loctek 1800mmx800m desk.
A great product, when adjusted correctly works really well A great product, when adjusted correctly works really well
Very good build quality - the product is pretty solid and weighs a bit so make sure you have a steady, weighted desk, otherwise the whole desk might wobble.
Installation was pretty straightforward. The arm itself looks very sleek aesthetically. Range of motion is great and holds very steady without much bouncing around. Quite happy with this
Very good build quality - the product is pretty solid and weighs a bit so make sure you have a steady, weighted desk, otherwise the whole desk might wobble.
Installation was pretty straightforward. The arm itself looks very sleek aesthetically. Range of motion is great and holds very steady without much bouncing around. Quite happy with this
Product came with good packaging without and scratches or damage. Product is as described and perform well. It helped me to clear a lot of space on my desk and at the same time it helps me to get perfect distance for my eyesight and angle. Great price as well compare to other brands and buying from other places. Highly Recommended Product. Product came with good packaging without and scratches or damage. Product is as described and perform well. It helped me to clear a lot of space on my desk and at the same time it helps me to get perfect distance for my eyesight and angle. Great price as well compare to other brands and buying from other places. Highly Recommended Product.
Have tried to contact PBtech for the past couple of days and they won't respond. this product came with no bolts for the mounting plate/clamp so is usleless. Have tried to contact PBtech for the past couple of days and they won't respond. this product came with no bolts for the mounting plate/clamp so is usleless.
Using this stand for my gaming monitor. is amazing and easy to use and modify for my use Using this stand for my gaming monitor. is amazing and easy to use and modify for my use
Huge range of motion, each joint can be configured to hold different weight. Only downside is wish the loctek logo was less obvious than chrome. Huge range of motion, each joint can be configured to hold different weight. Only downside is wish the loctek logo was less obvious than chrome.
This is a pretty high quality arm. The 30'' suggestion is just a guideline, as it holds up my 32'' monitor just fine and still has 8'' of clearance from the bottom of the monitor to the desk. It's rock-stable while in use but the monitor can be pivoted around with very little effort. Planning on buying another two for a triple monitor setup (I find individual arms give much more flexibility in multimonitor setups than the 'double' or 'triples' you can buy, which are hard-capped by size limits). This is a pretty high quality arm. The 30'' suggestion is just a guideline, as it holds up my 32'' monitor just fine and still has 8'' of clearance from the bottom of the monitor to the desk. It's rock-stable while in use but the monitor can be pivoted around with very little effort. Planning on buying another two for a triple monitor setup (I find individual arms give much more flexibility in multimonitor setups than the 'double' or 'triples' you can buy, which are hard-capped by size limits).
Works great Works great
Great perfect Great perfect
Got this monitor stand in the Level 3dom sale, so great price, very solid build. All the fixing hardware is very robust and it kind of needs to be when you've gor a 30" monitor hanging off the end of it. My desk had an existing 50mm hole in it, fortunatley the stand includes both clamp (for going on the back edge of the desk) and a grommit (for going through a hole in the desk) options. It was pretty straight forward to set up, and can be mounted in a hole up to 70mm diameter, which is great if your desk has got pre drilled holes. The gas strut nicely offsets the weight of the monitor making moving and reposisiotning easy. If anything the...view more Got this monitor stand in the Level 3dom sale, so great price, very solid build. All the fixing hardware is very robust and it kind of needs to be when you've gor a 30" monitor hanging off the end of it. My desk had an existing 50mm hole in it, fortunatley the stand includes both clamp (for going on the back edge of the desk) and a grommit (for going through a hole in the desk) options. It was pretty straight forward to set up, and can be mounted in a hole up to 70mm diameter, which is great if your desk has got pre drilled holes. The gas strut nicely offsets the weight of the monitor making moving and reposisiotning easy. If anything the tilt adjustment seems a little week (this may be possible to adjust, I didn't check it yet) otherwise movment is great. The upper cable guide (kind of a plastic clip) pops off pretty easy if you angle the monitor to a more extreme angle, so just watch that you leave some slack when doing the cable managment. If this is problematic, I found a little slot for a zip tie, so you can also just crate a loose zip tie loop that definitley will keep the cables in palce.
DLB508 features 360° rotation, -85°/+15° tilt up & down, -90°/+90° tilt left & right and 180° swivel arms which fully extend to 20 inches (512cm). Just use your hands to move your monitors into the desired position - no tools required!
Height adjustment through the spring arms, swivel/articulate each arm connection, tilt and rotate at the monitor holder. The mechanical spring hovering system makes it incredibly easy to change monitor height with the touch of a finger.
Allow wires to move freely while you adjust your screen position.
C-clamp and grommet mount bases are included for easy and quick installation.
Model name
DLB508
Weight Capacity
2-9kg (4.4 - 19.8 lbs.)
Material
Aircraft grade aluminum
Screen Tilt
85° up and 15° down
Screen Pivot
± 90°
Arm Pivot
± 180°
Fit screen
17" - 30"
Extension
512 mm / 20 inch
Lift
423 mm / 16.7 inch
VESA
75 Ă 75;100 Ă 100
"Excellent service and good price."
"PB Tech staff are professional and very helpful."
"Saad Malik provided exceptional customer service Would recommend"
"Ordered at 3pm and it was on my desk when i walked in at 9am the next day. Can't get much..."
"Fantastic support from Saad to re-arrange an order so we could pick it up locally. Fast and..."
"Good service, I had an issue with a purchase and they fix it right away, thumbs up. Thanks."
"After dropping and breaking my old phone. I placed an order for a new phone and case through PB..."
The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1 working day for North Island deliveries and 2 working days for South Island deliveries. Rural deliveries may take an extra working day, and bulk deliveries may take an extra 2-4 working days.
Need your order in a hurry? PB Tech offers same day delivery for the Auckland region. Simple place your order before 2pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.
PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com
PB Tech holds a significant amount of stock in our New Zealand based logistics centre and can ship stock from this location usually within 2-4 working days (see the timeframes mentioned on each product page for more accurate delivery estimates).
In most cases, items ordered from the NZ Logistics Centre are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
Unfortunately no pick-up options are available directly from this location, you can select a pick up from one of our branches however and we will transfer your order there so you can pick up.
Products marked as 'In stock with Supplier' are shipped from one of our suppliers / vendors. The time frame for shipments can vary so please refer to the shipping time frames mentioned on each product page for more accurate delivery estimates.
In most cases, items ordered from suppliers are first transferred to our Head Office / Distribution Centre before being shipped to the final destination.
If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.
To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.
If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.
Please note, items purchased on finance cannot be exchanged for a gift card.
If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.
If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.
To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).
To return a product to PB Tech directly, please complete our request a return form.
Or view our returns policy for more information.