GIVE FEEDBACK

Generating Print Page

MikroTik GESP+POE-IN Passive Gigabit PoE injector with Surge Protection

PB Tech price
PB Tech price
$ 32 .17
 +GST
$ 37 .00
 inc GST
$32.17  +GST
$37.00

MikroTik GESP+POE-IN Passive Gigabit PoE injector with Surge Protection

  • Brand: MikroTik
  • MPN: GESP+PoE-IN
  • Part #: NETMKT1383
  • UPC:
PB Tech price
$ 32 .17 $ 37 .00
 +GST  inc GST

No store stock available.

Click & Collect: Select your store to check availability
Delivery: Order now and it ships on 24 Sep When will I receive it?
$32.17  +GST
$37.00

Features

MikroTik GESP+POE-IN Passive Gigabit PoE injector with Surge Protection. You can't buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device - the GESP+POE-IN, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of mind.

Here's what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.

Don't forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.

These small devices can make all the difference when it comes to lightning strikes or static build-up.

The GESP units can usually absorb multiple impacts, but make sure to check their condition after each surge. For attachment of GESP units, we recommend using PVC zip ties. Just don't make it too tight.You know what they say - hope for the best, prepare for the worst. This small investment can save lots of time and money, so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!

Specifications

Brand

MikroTik

MPN

GESP+PoE-IN

Interface connections

RJ45 Male/Female Conector

ESD/EMP protection

Absorbing transient current with response to surge voltage of 100 V/s 1 kV/µs, ESD, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61643-21, ±8 kV contact, ±15 kV air

DC spark-over voltage

75 V @ 100 V/s

Maximum impulse spark-over voltage

700 V @ 1 kV/µs

Discharge current

3 kA (8/20µs)

Minimum insulation resistance

1 G ohm @ 50V

Maximum capacitance

4 pF @ 1 MHz

Data line protection

RJ45 10/100/1000 Ethernet

PoE support

Passive PoE

Operating temperature

-40 to 70°C

Manufacturer Part No:
GESP+PoE-IN
Brand:
Product Type:
-
UPC
-
Product Family:
-
Shipping Weight:
0.1 kg
PB Part No:
NETMKT1383
Product Model:
-
Warranty: 12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

There are currently no reviews for this product

Do you own this product?

Write a review and go into the monthly draw Win A $100 PB Tech Gift Card!

Delivery & Pick-up

Potential courier delays: Please note that due to the high volumes currently within the NZ courier network there is potential for some deliveries to be delayed.

Delivery Estimates

The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1-2 working days for North Island deliveries and 2-3 working days for South Island deliveries. Rural deliveries may take an extra working day. Bulk & hazard deliveries may take an extra 2-4 working days.

Next Day Delivery

Need your order in a hurry? PB Tech offers next day delivery for local Auckland addresses. Simple place your order before 4pm (provided your items are in stock) and select our next day delivery option in the checkout. T&C's apply. Learn more about Next Day Delivery.

Same Day Delivery

Need your order in a hurry? PB Tech offers same day delivery for Auckland, Hamilton, Wellington and Christchurch. Simple place your order before 1pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.

Shipping Costs

Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.

To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.

Shipping Security & Insurance

All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.

1 Hour Store Pick-up / Click & Collect

You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.

Overseas Shipments

PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com

Returns & Warranty

7 day right of exchange

If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.

To exchange a product, goods must be sealed and unopened, with packaging in original condition, accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange. A 20% restocking fee may be applied where goods are not returned in sealed, original packaging condition.

If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase. Items purchased on finance cannot be exchanged for a gift card.

 

Hassle free warranty service

If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.

If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.

 

Returning a product / making a warranty claim

To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).

To return a product to PB Tech directly, please complete our request a return form.

Or view our returns policy for more information.

MikroTik GESP+POE-IN Passive Gigabit PoE injector with Surge Protection

  • Brand: MikroTik
  • MPN: GESP+PoE-IN
  • Part #: NETMKT1383
PB Tech price $32.17 Excluding GST PB Tech price $37.00 Including GST

Date Created: 07:32, 16-09-2025
Product URL: https://www.pbtech.co.nz/product/NETMKT1383/MikroTik-GESPPOE-IN-Passive-Gigabit-PoE-injector-w
Branch New Stock On Display
Auckland - Albany 0
Auckland - Glenfield 0
Auckland - Queen Street 0
Auckland - Auckland Uni 0
Auckland - Newmarket 0
Auckland - Westgate 0
Auckland - Penrose 0
Auckland - Henderson (Express) 0
Auckland - St Lukes 0
Auckland - Manukau 0
Hamilton 0
Tauranga 0
New Plymouth 0
Palmerston North 0
Petone 0
Wellington 0
Auckland - Head Office 0
Auckland - East Tamaki Warehouse 0
Christchurch - Hornby 0
Christchurch - Christchurch Central 0
Dunedin 0

Features

MikroTik GESP+POE-IN Passive Gigabit PoE injector with Surge Protection. You can't buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device - the GESP+POE-IN, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of mind.

Here's what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.

Don't forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.

These small devices can make all the difference when it comes to lightning strikes or static build-up.

The GESP units can usually absorb multiple impacts, but make sure to check their condition after each surge. For attachment of GESP units, we recommend using PVC zip ties. Just don't make it too tight.You know what they say - hope for the best, prepare for the worst. This small investment can save lots of time and money, so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!

Specifications

Brand

MikroTik

MPN

GESP+PoE-IN

Interface connections

RJ45 Male/Female Conector

ESD/EMP protection

Absorbing transient current with response to surge voltage of 100 V/s 1 kV/µs, ESD, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61643-21, ±8 kV contact, ±15 kV air

DC spark-over voltage

75 V @ 100 V/s

Maximum impulse spark-over voltage

700 V @ 1 kV/µs

Discharge current

3 kA (8/20µs)

Minimum insulation resistance

1 G ohm @ 50V

Maximum capacitance

4 pF @ 1 MHz

Data line protection

RJ45 10/100/1000 Ethernet

PoE support

Passive PoE

Operating temperature

-40 to 70°C

Date Created: 07:32, 16-09-2025
Product URL: https://www.pbtech.co.nz/product/NETMKT1383/MikroTik-GESPPOE-IN-Passive-Gigabit-PoE-injector-w