Creality Accessories Filament Dryer Space Pi Compatible: FDM

It does the job but has some limitations:
- it's a sealed box without dessicant so can only remove a limited amount of moisture from filament -- you need to prop the cover open slightly to allow the humidfied warm air to escape if you want maximum drying.
- my unit developed a noisy fan after just a few hours of use (so annoying)
- the touch-screen is decidedly unresponsive
- the menu system is just silly. So many of the material settings produce identical temperature settings it seems a little pointless
- when you open the cover without a spool of filament in it, the whole thing will tip backwards

Bottom line... if you're on a ...view more It does the job but has some limitations:
- it's a sealed box without dessicant so can only remove a limited amount of moisture from filament -- you need to prop the cover open slightly to allow the humidfied warm air to escape if you want maximum drying.
- my unit developed a noisy fan after just a few hours of use (so annoying)
- the touch-screen is decidedly unresponsive
- the menu system is just silly. So many of the material settings produce identical temperature settings it seems a little pointless
- when you open the cover without a spool of filament in it, the whole thing will tip backwards

Bottom line... if you're on a budget, it's okay but there are better options if you're prepared to spend a little more money.

I have used it several times.
The preprogrammed temps are useful. The range of is also considerable.
Can also input manual options too. Can be used alongside to dispense filament straight from the dryer.
If need be, will consider buying another if I need two going at the same time.
Would recommend for entry enthusiasts. I have used it several times.
The preprogrammed temps are useful. The range of is also considerable.
Can also input manual options too. Can be used alongside to dispense filament straight from the dryer.
If need be, will consider buying another if I need two going at the same time.
Would recommend for entry enthusiasts.

After multiple print failures with ABS (I think that the stuff is cursed), I got one of these. It was worth every penny, is easy to use and makes all the difference with my prints. After multiple print failures with ABS (I think that the stuff is cursed), I got one of these. It was worth every penny, is easy to use and makes all the difference with my prints.

Good for drying out yr filaments. A few hints,would be better with one of those small brass bowden tube pushfit connectors on top then the tube wouldnt get pulled into the machine. Also very light filament roll spools get pulled up and jam when nearly empty,Ive put heavy brass tube inside one to keep it rolling,not get tilted Good for drying out yr filaments. A few hints,would be better with one of those small brass bowden tube pushfit connectors on top then the tube wouldnt get pulled into the machine. Also very light filament roll spools get pulled up and jam when nearly empty,Ive put heavy brass tube inside one to keep it rolling,not get tilted

I had my reservations initially as reviews online suggested that the touchscreen was temperamental. The touchscreen with my unit has been flawless... This filament dryer has noticeably improved my prints. The prints have far less stringing and are visually better. I had my reservations initially as reviews online suggested that the touchscreen was temperamental. The touchscreen with my unit has been flawless... This filament dryer has noticeably improved my prints. The prints have far less stringing and are visually better.

Does everything it is supposed to. No isuses and have had it drying fillament for 4 days straight. Also great to print straight out of the machine. Does everything it is supposed to. No isuses and have had it drying fillament for 4 days straight. Also great to print straight out of the machine.

Complete junk. Only worked ONCE then it developed an unknown error where it displays ER on the screen and fails to start. You can hear the fan trying to spin up for 1 second every 10 seconds or so for hours and nothing ever happens. Even if yours does happen to work, the touch screen responsiveness is terrible, you have to press it so hard that the screen warps and half the time it doesn't register. The humidity sensor is inaccurate and stops at 15%. And the rollers sound like they have sand for bearings. Do not waste your money on this POS!!!! Complete junk. Only worked ONCE then it developed an unknown error where it displays ER on the screen and fails to start. You can hear the fan trying to spin up for 1 second every 10 seconds or so for hours and nothing ever happens. Even if yours does happen to work, the touch screen responsiveness is terrible, you have to press it so hard that the screen warps and half the time it doesn't register. The humidity sensor is inaccurate and stops at 15%. And the rollers sound like they have sand for bearings. Do not waste your money on this POS!!!!

By: dfbpurcell 06/07/24

Verified Owner