GIVE FEEDBACK

Generating Print Page

Raspberry Pi Official Camera Module 3 NoIR Updated Version from Camera Module 2, Build-In 12M Pixel Sony IMX708 Image Sensor Module

Normally $43.90
Normally $50.48
Save 12%
Save 12%
$ 38 .50
 +GST
$ 44 .28
 inc GST
$38.50  +GST
$44.28

Raspberry Pi Official Camera Module 3 NoIR Updated Version from Camera Module 2, Build-In 12M Pixel Sony IMX708 Image Sensor Module

Normally $43.90
Normally $50.48
Save 12%
Save 12%
Special price
$ 38 .50 $ 44 .28
 +GST  inc GST
Tax free price $40.81

Ends in --, while stocks last!


Click & Collect: Available from 18 stores.
Select your store to check availability
Delivery: Order now and it ships today When will I receive it?
$38.50  +GST
$44.28

Four payments of $11.18 per fortnight*

Afterpay lets you spread the cost of your purchase over 4, interest-free, fortnightly payments.

Click the button below or select Afterpay as your payment method during the checkout process.

If you do not have a Afterpay account you will be able to create one at checkout.

*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.

Learn more about Afterpay

Case Colour

N/A

Memory Size

N/A

PSU Colour

N/A

Features

Capture high-quality images and videos without an IR filter on your Raspberry Pi.


The Raspberry Pi Camera Module 3 is the latest entry in the mainstream RPi camera line-up, and the successor to the popular Camera Module 2. Built around a 12-megapixel Sony IMX708 image sensor module, Camera Module 3 offers a few key enhancements over its predecessor. Improved low-light sensitivity makes for better photos and output in situations where there's not a lot of light. The module also features powered autofocus making it easier to get a sharp picture output. Finally the Camera Module 3 features High Dynamic Range (HDR) support expanding the range of color and contrast in the output.

 

Not just for stills

Camera Module 3 can record full HD video at 50fps, with higher frame rates available at lower resolutions. Featuring an HDR mode and autofocus, it not only provides great stills quality, but is also a fantastic tool for video recording and streaming. Watch our video filmed entirely on Camera Module 3 to see it in action.

 

For developers. Learn more about libcamera

Camera Module 3 takes advantage of the Raspberry Pi Open Source Camera System powered by libcamera. This rich set of libraries gives developers precise control over image processing and better access to the internals of Camera Module 3.

 

For beginners. Learn more about Picamera2

The latest version of Raspberry Pi OS comes pre-installed with a beta of Picamera2, a Python library developed here at Raspberry Pi in Cambridge. For beginners and advanced users alike, Picamera2 is perfect for everything from home projects to machine learning applications.

 

Documentation. Camera Module 3 documentation

From hardware schematics to software configuration, developers and users can find all the information they need about Camera Module 3 in our extensive and detailed documentation.

 

Documents:

Raspberry Pi Camera Module 3 product brief
Raspberry Pi Camera Module 3 Standard mechanical drawing
Raspberry Pi Camera Module 3 Wide mechanical drawing

 

Shot on Camera Module 3

Specifications

General

- Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
- High signal-to-noise ratio (SNR)
- Built-in 2D Dynamic Defect Pixel Correction (DPC)
- Phase Detection Autofocus (PDAF) for rapid autofocus
- QBC Re-mosaic function
- HDR mode (up to 3 megapixel output)
- CSI-2 serial data output
- 2-wire serial communication (supports I2C fast mode and fast mode plus)
- 2-wire serial control of focus mechanism

Resolution:

11.9 megapixels

Sensor size:

7.4mm sensor diagonal

Pixel size:

1.4µm x 1.4µm

Horizontal/vertical:

4608 x 2592 pixels

Diagonal field of view:

75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)

Common video modes:

1080p50, 720p100, 480p120

Output:

RAW10

IR cut filter:

Integrated in standard variants; not present in NoIR variants

Dimensions:

25 x 24 x 11.5mm (12.4mm height for Wide variants)

Ribbon cable length:

200mm

Cable connector:

15 x 1mm FPC

Includes:

- Raspberry Pi Camera Module 3 NoIR
- 150mm CSI cable

Cable compatibility:

All models of Raspberry Pi Zero require a Raspberry Pi Zero camera cable to connect to the Raspberry Pi Camera Module; the standard cable supplied with the camera is not compatible with the smaller Raspberry Pi Zero camera connector. Suitable cables are supplied with the Raspberry Pi Zero Case.

Manufacturer Part No:
SC0873
Brand:
Product Type:
-
UPC
-
Product Family:
Official
Shipping Weight:
0.1 kg
PB Part No:
SEVRBP0397
Product Model:
Camera Module 3 NoIR
Warranty: 12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

There are currently no reviews for this product

Do you own this product?

Write a review and go into the monthly draw Win A $100 PB Tech Gift Card!

Accessories

Delivery & Pick-up

Potential courier delays: Please note that due to the high volumes currently within the NZ courier network there is potential for some deliveries to be delayed.

Delivery Estimates

The estimated time to ship for each product we sell is detailed on the individual product page just underneath the price. From when your items ship, products typically arrive within 1-2 working days for North Island deliveries and 2-3 working days for South Island deliveries. Rural deliveries may take an extra working day. Bulk & hazard deliveries may take an extra 2-4 working days.

Next Day Delivery

Need your order in a hurry? PB Tech offers next day delivery for local Auckland addresses. Simple place your order before 4pm (provided your items are in stock) and select our next day delivery option in the checkout. T&C's apply. Learn more about Next Day Delivery.

Same Day Delivery

Need your order in a hurry? PB Tech offers same day delivery for Auckland, Hamilton, Wellington and Christchurch. Simple place your order before 1pm (provided your items are in stock) and select one of our same day delivery options 'Evening Delivery' or 'Urgent 3-hour Delivery' in the checkout. T&C's apply. Learn more about Same Day Delivery.

Shipping Costs

Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.

To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.

Shipping Security & Insurance

All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.

1 Hour Store Pick-up / Click & Collect

You can pick-up your online order from any of our stores nationwide. You can select which store you want to pick up from at the checkout. Provided the store you select has stock and there's no hold-ups with payment we will have your order ready within 1 hour (during normal trading hours for that store) otherwise it may take up to 5 working days to transfer the stock to the store so your order can be fulfilled. Learn more about our Click & Collect process.

Overseas Shipments

PB Tech regularly ships overseas to Australia and beyond. If you are located in Australia, you can order directly from our Australian site www.pbtech.com/au. If you are from another country you can order from www.pbtech.com

Returns & Warranty

7 day right of exchange

If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.

To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.

If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.

Please note, items purchased on finance cannot be exchanged for a gift card.

 

Hassle free warranty service

If your product develops a fault within the manufacturer warranty period, you can either contact the manufacturer directly (some manufacturers provide a high level of warranty service - including free pickup or in some cases onsite repair), or return to one of our services centres / stores. Where the product has been directly imported by PB Tech, you need to contact us directly or present the product at any one of our service centres / stores together with your proof of purchase.

If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.

 

Returning a product / making a warranty claim

To contact the manufacturer directly to troubleshoot your product or to request a warranty repair, please view the list of manufacturer / brand warranty contacts (for products imported directly by PB Tech please return to us directly by completing our request a return form).

To return a product to PB Tech directly, please complete our request a return form.

Or view our returns policy for more information.

Raspberry Pi Official Camera Module 3 NoIR Updated Version from Camera Module 2, Build-In 12M Pixel Sony IMX708 Image Sensor Module

Normally $43.90 $38.50 Excluding GST Normally $50.48 $44.28 Including GST

Date Created: 04:49, 24-06-2024
Product URL: https://www.pbtech.co.nz/product/SEVRBP0397/Raspberry-Pi-Official-Camera-Module-3-NoIR-Updated
Branch New Stock On Display
Albany 6
Glenfield 2
Queen Street 1
Auckland Uni 2
Newmarket 3
Westgate 5
Penrose 5
Henderson (Express) 3
St Lukes 6
Manukau 2
Hamilton 1
Tauranga 3
New Plymouth 1
Palmerston North 2
Petone 3
Wellington 1
Head Office 7
Hornby 2
Christchurch Central 3

Features

Capture high-quality images and videos without an IR filter on your Raspberry Pi.


The Raspberry Pi Camera Module 3 is the latest entry in the mainstream RPi camera line-up, and the successor to the popular Camera Module 2. Built around a 12-megapixel Sony IMX708 image sensor module, Camera Module 3 offers a few key enhancements over its predecessor. Improved low-light sensitivity makes for better photos and output in situations where there's not a lot of light. The module also features powered autofocus making it easier to get a sharp picture output. Finally the Camera Module 3 features High Dynamic Range (HDR) support expanding the range of color and contrast in the output.

 

Not just for stills

Camera Module 3 can record full HD video at 50fps, with higher frame rates available at lower resolutions. Featuring an HDR mode and autofocus, it not only provides great stills quality, but is also a fantastic tool for video recording and streaming. Watch our video filmed entirely on Camera Module 3 to see it in action.

 

For developers. Learn more about libcamera

Camera Module 3 takes advantage of the Raspberry Pi Open Source Camera System powered by libcamera. This rich set of libraries gives developers precise control over image processing and better access to the internals of Camera Module 3.

 

For beginners. Learn more about Picamera2

The latest version of Raspberry Pi OS comes pre-installed with a beta of Picamera2, a Python library developed here at Raspberry Pi in Cambridge. For beginners and advanced users alike, Picamera2 is perfect for everything from home projects to machine learning applications.

 

Documentation. Camera Module 3 documentation

From hardware schematics to software configuration, developers and users can find all the information they need about Camera Module 3 in our extensive and detailed documentation.

 

Documents:

Raspberry Pi Camera Module 3 product brief
Raspberry Pi Camera Module 3 Standard mechanical drawing
Raspberry Pi Camera Module 3 Wide mechanical drawing

 

Shot on Camera Module 3

Specifications

General

- Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
- High signal-to-noise ratio (SNR)
- Built-in 2D Dynamic Defect Pixel Correction (DPC)
- Phase Detection Autofocus (PDAF) for rapid autofocus
- QBC Re-mosaic function
- HDR mode (up to 3 megapixel output)
- CSI-2 serial data output
- 2-wire serial communication (supports I2C fast mode and fast mode plus)
- 2-wire serial control of focus mechanism

Resolution:

11.9 megapixels

Sensor size:

7.4mm sensor diagonal

Pixel size:

1.4µm x 1.4µm

Horizontal/vertical:

4608 x 2592 pixels

Diagonal field of view:

75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)

Common video modes:

1080p50, 720p100, 480p120

Output:

RAW10

IR cut filter:

Integrated in standard variants; not present in NoIR variants

Dimensions:

25 x 24 x 11.5mm (12.4mm height for Wide variants)

Ribbon cable length:

200mm

Cable connector:

15 x 1mm FPC

Includes:

- Raspberry Pi Camera Module 3 NoIR
- 150mm CSI cable

Cable compatibility:

All models of Raspberry Pi Zero require a Raspberry Pi Zero camera cable to connect to the Raspberry Pi Camera Module; the standard cable supplied with the camera is not compatible with the smaller Raspberry Pi Zero camera connector. Suitable cables are supplied with the Raspberry Pi Zero Case.

Date Created: 04:49, 24-06-2024
Product URL: https://www.pbtech.co.nz/product/SEVRBP0397/Raspberry-Pi-Official-Camera-Module-3-NoIR-Updated