Creality FDM 3D Printer Ender-3 V3 KE Build Size 220 x 220 x 240 mm Max 500mm/s (Creality Lab test with Hyper PLA) - Auto Calibration - Support ABS - PLA - PETG - TPU(95A) - ASA

Great little printers that are pretty well print after initial installation, there are a few little tweaks one will need to do to get your printing right. If you think they will keep printing fine forever forget it! So many variables and yes filament brands will print differently, also you will need to change things as you go and every now and again you may find it all goes wrong...if you are someone that can't handle the tinkering aspect then 3d printing won't be for you! With all this said the KE is a great 1st step and will also do some pretty technical prints with a little tuning. Pb tech themselves have stepped up also with parts and...view more Great little printers that are pretty well print after initial installation, there are a few little tweaks one will need to do to get your printing right. If you think they will keep printing fine forever forget it! So many variables and yes filament brands will print differently, also you will need to change things as you go and every now and again you may find it all goes wrong...if you are someone that can't handle the tinkering aspect then 3d printing won't be for you! With all this said the KE is a great 1st step and will also do some pretty technical prints with a little tuning. Pb tech themselves have stepped up also with parts and spares needed so don't be scared get in there and you will love them!

I was considering going down the Bambu route but decided to get something like this. It's very usable out of the box and requires little setup time, the included white filament printed the pre-sliced benchy really nicely. I'm coming from an overly-modded Ender 3 which doesn't print as reliably as this thing, I haven't printed "that much" with this but it's a lot more click-and-go and really fast to iterate on designs at the speed this thing prints at.

I immediately did a few things after printing the test benchy which took me a couple of hours and am happy with the result and imagine I won't be fiddling with anything other than slicer settin...view more I was considering going down the Bambu route but decided to get something like this. It's very usable out of the box and requires little setup time, the included white filament printed the pre-sliced benchy really nicely. I'm coming from an overly-modded Ender 3 which doesn't print as reliably as this thing, I haven't printed "that much" with this but it's a lot more click-and-go and really fast to iterate on designs at the speed this thing prints at.

I immediately did a few things after printing the test benchy which took me a couple of hours and am happy with the result and imagine I won't be fiddling with anything other than slicer settings maybe:
- Rooted & replaced Creality's interface with Mainsail
- Sanded down the spacers so the bed would be "more" level (just over 0.2mm variance at 60C)
- Went straight to OrcaSlicer, default settings were good but will probably tweak these a slight bit

By: Kennel 15/02/24

Verified Owner

The speed is so fast it's worth the price The speed is so fast it's worth the price

Auto bed levelling and super fast speeds are much desired upgrades over my original Ender 3 Pro.
I had issues with surface quality of my parts, but have resolved this after purchasing the vibration compensation sensor separately.
The frame isn't as sturdy as older models, installing a gantry support should resolve this (https://www.thingiverse.com/thing:6516352).

Aside from some initial issues, I am very happy with this printer, it should last many years and be a great workhorse. Auto bed levelling and super fast speeds are much desired upgrades over my original Ender 3 Pro.
I had issues with surface quality of my parts, but have resolved this after purchasing the vibration compensation sensor separately.
The frame isn't as sturdy as older models, installing a gantry support should resolve this (https://www.thingiverse.com/thing:6516352).

Aside from some initial issues, I am very happy with this printer, it should last many years and be a great workhorse.

On paper a really good product really easy to set up good speeds good size and all though once set up i came into some trouble with the limiter switch for the x axes steeper motor.

I would suggest this printer but just be careful and know that they are not aways going to work out of the box also a tip just get a Bambu lab a1 or ai mini it just better in a lot of ways. On paper a really good product really easy to set up good speeds good size and all though once set up i came into some trouble with the limiter switch for the x axes steeper motor.

I would suggest this printer but just be careful and know that they are not aways going to work out of the box also a tip just get a Bambu lab a1 or ai mini it just better in a lot of ways.

Absolutely love this printer. I got it for a little cheaper than usual so that's good as well.
Do recommend! Although if you don't need the speed get the SE version!!! Absolutely love this printer. I got it for a little cheaper than usual so that's good as well.
Do recommend! Although if you don't need the speed get the SE version!!!

Easy to assemble out of the box and the test print was great. Faster printing and better quality than the older Ender 3.
One thing I found is to make sure filament is dry as it is more fussy about this than the old printer, but I can use the bed of the old printer with a cardboard box to make a drying box for filament while not in use.
I have used PLA & PETG filament so far with good results so very happy with the faster printing.
I would think having some previous printing experience would be useful if buying this printer, but in saying that any new tech is a steep learning curve. Easy to assemble out of the box and the test print was great. Faster printing and better quality than the older Ender 3.
One thing I found is to make sure filament is dry as it is more fussy about this than the old printer, but I can use the bed of the old printer with a cardboard box to make a drying box for filament while not in use.
I have used PLA & PETG filament so far with good results so very happy with the faster printing.
I would think having some previous printing experience would be useful if buying this printer, but in saying that any new tech is a steep learning curve.

This product is really good I have had no problems with it This product is really good I have had no problems with it

After a long wait and careful consideration I took the plunge and purchased the Creality Ender-3 V3 KE. What a joy to work with this machine. No more worries about bed leveling… and the speed… it is amazing. Then the best part is the manner how the file is send to the printer… Wireless is the way to go….. no more SD card the write and insert… such a joy…. Cannot believe I had took this long to finally be this so happy with a printer.
At this time I have nothing bad to say about the printer.
If someone ask me which printer he/she should get… would I definitely tell them to get this printer. So easy to put together and setup… you would be...view more After a long wait and careful consideration I took the plunge and purchased the Creality Ender-3 V3 KE. What a joy to work with this machine. No more worries about bed leveling… and the speed… it is amazing. Then the best part is the manner how the file is send to the printer… Wireless is the way to go….. no more SD card the write and insert… such a joy…. Cannot believe I had took this long to finally be this so happy with a printer.
At this time I have nothing bad to say about the printer.
If someone ask me which printer he/she should get… would I definitely tell them to get this printer. So easy to put together and setup… you would be printing in less than 30 minutes.
Happy printing…

Awesome 3D printer for the price, fast & easy setup and easy to use. Awesome 3D printer for the price, fast & easy setup and easy to use.